54 lines
2.1 KiB
Markdown
54 lines
2.1 KiB
Markdown
# FaceW
|
|
|
|
A 60% no frills keyboard.
|
|
|
|
The FaceW is a special run of the WKL B.Face sourced from Sprit that doesn't have underglow RGB LEDs
|
|
but does have in switch LEDs. Also unlike the B.Face, it is based on ps2avru instead of ps2avrGB. It
|
|
is designed and manufactured in Korea. It originally uses BootMapperClient for programming but
|
|
can now also use QMK.
|
|
|
|
Keyboard Maintainer: [MechMerlin](www.github.com/mechmerlin)
|
|
Hardware Supported: FaceW Sprit Edition PCB
|
|
Hardware Availability: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1352
|
|
|
|
## Keyboard Notes
|
|
- The FaceW Sprit Edition can be purchased on [mechanicalkeyboards.com](www.mechanicalkeyboards.com)
|
|
- Uses ps2avru instead of ps2avrgb
|
|
- To put in reset mode hold `q` while inserting the USB cable
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make facew:default
|
|
|
|
Flashing
|
|
|
|
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
|
|
|
|
Windows:
|
|
1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
|
|
2. Place your keyboard into reset.
|
|
3. Press the `Find Device` button and ensure that your keyboard is found.
|
|
4. Press the `Open .hex File` button and locate the `.hex` file you created.
|
|
5. Press the `Flash Device` button and wait for the process to complete.
|
|
|
|
macOS:
|
|
1. Install homebrew by typing the following:
|
|
```
|
|
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
|
|
```
|
|
2. Install `crosspack-avr`.
|
|
```
|
|
brew cask install crosspack-avr
|
|
```
|
|
3. Install the following packages:
|
|
```
|
|
brew install python
|
|
brew install pyusb
|
|
brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
|
|
|
|
4. Place your keyboard into reset.
|
|
5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
|
|
|
|
|
|
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
|