qmk_firmware/keyboards/kprepublic/bm80hsrgb/readme.md
peepeetee c5f1e9797a
rename kprepublic bm keyboards to have a standardized naming format (#15047)
* change missed kprepublic readmes

* fix xiudi readmes

* initial change, see pr description

* change readmes

* changes names in readmes and device descriptors
2021-11-18 08:37:23 +11:00

31 lines
1.4 KiB
Markdown

# BM80HSRGB
![BM80HSRGB](https://i.imgur.com/AqjEjOi.jpeg)
A tkl, hotswap, in switch RGB keyboard from KPRepublic.
* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
* Hardware Supported: BM80HSRGB
* Hardware Availability: [KP Republic](https://kprepublic.com/collections/new-arrival/products/bm80rgb-bm80-rgb-80-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c)
Make example for this keyboard (after setting up your build environment):
make kprepublic/bm80hsrgb:default
Flashing example for this keyboard:
make kprepublic/bm80hsrgb:default:flash
To reset the board into bootloader mode, do one of the following:
* Short the two-pad footprint between the "delete" key and the "end" key while the board is plugged in
* Press the switch labled RST on the back of the PCB, near the MCU, while the board is plugged in
* Hold the Esc key while connecting the USB cable (also erases persistent settings)
All of the RGB matrix effects are enabled by default. To disable specific ones, see [this section](https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects) for more information.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).