qmk_firmware/keyboards/handwired/bstk100/readme.md
FREEWING.JP 604fca4aa9
[Keyboard] bstk100 handwired (#14158)
* General: Initial commit for bstk100

* bstk100 custom keyboard firmware

* fix Bootloader section

* fix  "Pad 0" key twice

* delete via config

* fix readme.md key layout

* add via keymap

* fix readme.md info

* remove keymap.json

* Suggested change readme.md

* moved to handwired folder

* fix readme.md for handwired

* fix info.json

* Suggested change readme.md

* Update keyboards/handwired/bstk100/rules.mk

fix requested changes

* Update keyboards/handwired/bstk100/rules.mk

fix requested changes

* Update keyboards/handwired/bstk100/info.json

* Update keyboards/handwired/bstk100/rules.mk
2022-01-08 13:13:29 -08:00

36 lines
1.4 KiB
Markdown

# bstk100
BUFFALO USB 10-Key keyboard BSTK100 modification by Pro Micro and QMK firmware .
see [[FREE WING HOME PAGE]](http://www.neko.ne.jp/~freewing/) for more detail .
![bstk100](https://i.imgur.com/9s5kxSB.jpeg)
![bstk100](https://i.imgur.com/rsilkiy.jpeg)
![bstk100](https://i.imgur.com/TuQlxat.jpeg)
![bstk100](https://i.imgur.com/w0g6Qlz.jpeg)
![bstk100](https://i.imgur.com/ORgbBQh.jpeg)
![bstk100](https://i.imgur.com/1MDm3zt.png)
* Keyboard Maintainer: [FREE WING GitHub](https://github.com/FREEWING-JP/qmk_firmware)
* Hardware Supported: Pro Micro ATmega32U4 5V/16MHz
* Hardware Availability: [BUFFALO USB 10-Key keyboard BSTK100BK](https://amzn.to/389GGtP), [Pro Micro ATmega32U4 5V/16MHz](https://amzn.to/3jePZPi)
Make example for this keyboard (after setting up your build environment):
make handwired/bstk100:default
Enable VIA feature in QMK
make handwired/bstk100:via
Flashing example for this keyboard:
make handwired/bstk100:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in one way:
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead