46 lines
1.9 KiB
Markdown
46 lines
1.9 KiB
Markdown
# 3W6
|
|
|
|
|
|
|
|
The 3w6 is a low profile, split ortholinear keyboard with 36 keys.
|
|
|
|
I needed a keyboard for work and wasn't really satisfied with the available alternatives (namely Corne, Kyria and Ferris), mostly because they are either rather large and/or don't have the spacing I would like.
|
|
|
|
The 3w6 is designed to be a simple, realiable, cheap and small keyboard to be taken everywhere.
|
|
|
|
There are currently two revisions:
|
|
* Rev1:
|
|
- onboard microcontroller (ATMega32U4)
|
|
- USB-C connector Board <-> PC
|
|
- USB-C connectors between both split halfs
|
|
- choc spacing (18x17mm)
|
|
- aggressive pinky stagger
|
|
- support for Choc V1 switches
|
|
* Rev2:
|
|
- everything Rev1 did
|
|
- additional middle plate (2mm)
|
|
- support for [Pimoroni Trackball](https://shop.pimoroni.com/products/trackball-breakout) instead of outer thumb switch on right half, needs midplate
|
|
- mounting holes for [Tenting Puck](https://splitkb.com/collections/keyboard-parts/products/tenting-puck), only usable without mid or switchplate
|
|
|
|
---
|
|
|
|
* Keyboard Maintainer: [weteor](https://github.com/weteor)
|
|
* Hardware Supported:
|
|
* 3w6 rev1
|
|
* 3w6 rev2 (with Pimoroni support)
|
|
* Hardware Availability:
|
|
* make one yourself: [Design and Productionfiles](https://github.com/weteor/3w6)
|
|
* maintainer is selling kits when available
|
|
---
|
|
To reach the bootloader, connect the board to the PC and push the reset button on left half.
|
|
|
|
Make examples for this keyboard (after setting up your build environment):
|
|
|
|
make 3w6/rev1:default
|
|
make 3w6/rev2:default
|
|
make 3w6/rev2:default_pimoroni
|
|
|
|
---
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|