megamanmalte/qmk_firmware
0
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
qmk_firmware/quantum/template/ps2avrgb/readme.md
MechMerlin 4c14b5832a Fix up ps2avrgb templates (#5606) 
* fix up ps2avrgb templates

* set backlight enable to no as per review comments

* add back no_uart
2019-05-03 17:26:29 -07:00

1.8 KiB
Raw Blame History

%KEYBOARD%

![%KEYBOARD%](imgur.com image replace me!)

A short description of the keyboard/project

Keyboard Maintainer: %YOUR_NAME%
Hardware Supported: The PCBs, controllers supported
Hardware Availability: links to where you can find this hardware

Make example for this keyboard (after setting up your build environment):

make %KEYBOARD%:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Hold down the key located at K00, commonly programmed as Esc while plugging in the keyboard.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following: 
    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
  2. Install crosspack-avr. 
    brew cask install crosspack-avr
  3. Install the following packages: 
    brew install python3
pip3 install pyusb
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
  4. Place your keyboard into reset.
  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.