72cf966a88
Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com>
33 lines
1.3 KiB
Markdown
33 lines
1.3 KiB
Markdown
# DT40
|
|
|
|
|
|
|
|
## The PCB features:
|
|
* QMK & VIA compatibility
|
|
* RGB Matrix backlight
|
|
* Thin body & Simple keys
|
|
|
|
|
|
The following is the QMK Firmware for the Destop 40% keylayout - designed in Dongguan Jizhi Electronic Technology Co., Ltd
|
|
* Keyboard Maintainer: [JZ-Skyloong](https://github.com/JZ-Skyloong)
|
|
* Hardware Supported: DestopPCB for Skyloong keylayout 40%, STM32F103C8T6
|
|
* Hardware Availability: http://www.skyloong.com.cn
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make skyloong/dt40:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make skyloong/dt40:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|