* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL
* add define USB_MAX_POWER_CONSUMPTION
* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk
rules.mk: add 4 Variables for compile control.
# Helix keyboard customize
# you can edit follows 4 Variables
# jp: 以下の4つの変数を必要に応じて編集します。
OLED_ENABLE = no # OLED_ENABLE
LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
LED_ANIMATIONS = yes # LED animations
config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define
* HELIX_ROWS define move from config.h to rules.mk
* add readme.md
* rename readme.md to readme_jp.md
* add readme.md and modify readme_jp.md
* change helix/ssd1306.c for select glcdfont.c position
* add variable LOCAL_GLCDFONT into each keymaps rules.mk
* copied lets_slit to splinter
* initial splinter layout
* remove unused keymaps
* implemented second half of the keyboard
* initial definition of tap dance
* the tap dance is working now
tap dance for right hand 4c 2r
hold - shift
single tap - n
double tap - ñ
triple tap - Ñ
* clear the keymap.c
* put the tap state on to array
* the n tilde tap dance should produce right shift if hold
* add esc grv tap dance
* remove the defined SS_LSFT on tap_dance.h
because it was added on the quantum.h
* minor cleanup for the keymap
* use the X_* on tap dance
* added super alt tap dance
* use the NO_TAP on tap dance reset
* allow track what rows and cols pressed
* added the RGUI_ALT
* keymap arrangement
* use i2c
* initial rgb
* layer colors
* initial rgb pressed key
* set the layers led
* SUCCESS!!!
* cleaning
* improve shifted layer
* led brightness
* initial caps rainbow
* rename SET_LED_RGB to SET_LED_RGB_HEX
* clean the SET_LED_RGB_HEX and added SET_LED_RGB
* clean format
* caps lock rainbow
* rename key_led to set_key_led
* caps lock rainbow enhanced
* make varibiables static
* change back the loop max value to 360 for the rainbow
* add scroll lock to the rainbow led
* fix pos calculation of right hand board
* add ative keys and make rainbow color can override by key press
* remove the TOTAL_MATRIX_POINTS
* some improvments for the rgb
* call the rgblight_set on the process_record_user
* some enhancement for the leds
* pass the dim value to set_layer_led and limit the brightness on _VL
set the brightness to 2 if the dim value is less than 2 because
their is not enought power for the leds.
* remove the rgb steps on the config
* use the non rev config
* remove all the revisions
* favor i2c instead of serial and remove all the ref for the serial
* clang formatting
* allow to save to eeprom the brightness value
* add bootloader caterina this will enable soft reset key
* initial commit for the userspace
* added my own keymap for splinter
* first working userspace
* move splinter to handwired keyboards
* handwired splinter default keymap
* move some config to my keymap
* cleanup some headers on the keymap
* move the EECONFIG_RGB_DIM to the user space
* I fix remove the GUI on SPC and ENT
* remove the default include on tap_dance.c
* add lights.c and refactoring
* fix wrong source for led index
* seperate the variable on set_layer_led for readabilty.
* set the usb max power consumption to 50
* fix led lighting
* add new enums for tap dance
* use romeve path avr on eeprom.h
* fix wrong spelling on TP names
* changed the tap dance
* allow to set rainbow on some pressed key
* add reset key
* fix error on matrix.c if ROW2COL is used
* add extraflags -flto
* See e2352d4
* Got no love from i2c, serial to the rescue
* Fix the led will lit up to color red after boot
* Trial if the power can handle yellow color at full
* Add comment
* Use EE_HANDS
* add config.h in the use space
* KC_N on BL should wrap in SFT_T
* See d13567d, put it back but increase 1 level
* Fix led soldering mistake
* set the tapping_term to 100
* Use TT for the changing the layer
* Remove the changing space to enter and vice version on BL and UL
* Increate the tapping term
* Use tap dance on changing layer
* Add assorted layer
* propery way to tapdance
* Remove DA_EGRV
This also fix the wrong placement of the reset and dance lspr should register
the KC_LGUI on finished not unregistered.
* Remove the media control to the up and down layer
* Remove the interrupted state of the tap dance
* swapt the space and enter on to th caps
* Shorthand
* Keymap update
* My keymap for lets_split
* cleaning
* edited keymap and fitted for tada68
* edited rules to make mouse work
* filled config.h to make mouse cursor move more smooth
* added descriptive readme
* added hhkb eric
* dz60 and hhkb
* editted eric hhkb and dz60
* Added HHKB Config
* Removed HHKB Config
* Added HHKB Config
* Changed the legends on HHKB info.json
* Added Tada68 ISO Config and Staryu
* Removed Tada68 ISO Config
* Add naKey on behalf of ckeys
* Update James's code to more modern QMK standards
* Add info.json for QMK Configurator support
* Fix that build breakage
* Rename naKey.c to nakey.c
* Rename naKey.h to nakey.h
* Use the new debounce algorithm in dactyl/matrix.c [#2065]
This incorporates the fixed/optimized debounce code added to
quantum/matrix.c in:
* 508eddf8ba
* 4c6960835c
* 32f88c0717
* f403028974
* a06115df19
* Fix the row/column swap in dactyl [#2065]
With a column-driven keyboard, reading from the mcp23081 returns a
column-state, which takes some extra work to translate into the
row-state used in the actual matrix. The ergodox_ez code sidestepped
that problem by calling rows "columns" and columns "rows." With this
change, the dactyl now calls rows "rows" and columns "columns."
* Cleanup: variable names, documentation [#2065]
* Support MATRIX_MASKED in dactyl/matrix.c [#2065]
* Only unselect one col in unselect_col [#2065]
Bonus: saves one i2c transaction per matrix_scan!
* Implement COL2ROW in dactyl/matrix.c [#2065]
* Fix a typo in dactyl/matrix.c
This entirely doesn't matter. The PORT values are set during
init_keyboard and never change. They're repeatedly set to the same
thing. These PORT lines shouldn't even exist, but since they do, they
should at least look right.
* Implement COL_PINS/ROW_PINS for dactyl [#2065]
* Rename "mcp23018" to "expander" [#2065]
I honestly don't know whether/how well this code works with other I/O
expanders, but at least in theory, it should be generic enough to work
with others. Given that, the variable names shouldn't refer to a
specific model of expander.
* Remove matrix_power_up from dactyl/matrix.c [#2065]
It's commented out in quantum/matrix.c, and the dactyl has no power
up/down behavior beyond being unplugged (which goes to matrix_init), so
there's no sense keeping it around.
* Only initialize expander_input_mask once [#2065]
...and rename input_mask to expander_input_mask, since now that it isn't
scoped to init_expander it isn't clear that it's only for the expander.
* Rename LAYOUT to LAYOUT_all
Add additional layouts for the pearl with all splits
and the pearl with splits but a 6.25u spacebar.
* add new layouts to info.json
* Change handling of adjust layer to make it more LT(...) friendly.
* Update based on feedback from drashna.
* Change handling of adjust layer to make it more LT(...) friendly. This reworks handling to make it a little more friendly to include in keymaps.
* QMK Configurator updates for the Pearl 40%
Attempt to get the physical layout as displayed in the Configurator more true-to-life.
* Bugfixes per mechmerlin
"By changing KEYMAP to LAYOUT in the .h file, all the keymaps who rely on KEYMAP are now broken. You need to go into the keymap directory and fix all the keymaps affected by this change. Should just be an issue of renaming KEYMAP to LAYOUT."
* Merge pull request #2 from noroadsleft/noroadsleft-patch-20180425
Bugfixes per mechmerlin
* keymap.c updates for Pearl
-#include "pearl.h"
+#QMK_KEYBOARD_H
* Update config.h
Matrix pinout updated to current revision.
* Add updated matrix, define RGB pin
Matrix updated to current pinout, pin for WS2812 defined.
* Added Modular keyboards L,R and NUM
Created code modules for the 3 modules of the modular keyboard.
Original idea by MechboardsUK. Uses i2c implementation similar to lets
split
* Remove modular from master
This is to fix incorrect branching
* CU75 keymap fix
Incorrect keymap now fixed
* Add new project files for UT47
* Copy over keymap and related files
* Add LED_controls.ino
* Add README instructions
* Attempt sending press byte data
* Disable mousekeys
* Enable sending serial data to LED controller
* Update LED mode names
* Remove extra file
* Add LED enable flag
* Update READMEs with more info
* Credit original author
* Update copyrights
* Update docs
* Changed based on review
* Move layout screenshot to Imgur
* Append to src
* Enable mousekeys to fix bad keycodes
* Additional changes based on feedback
* Fix fn layer keys
* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk
rules.mk: add 4 Variables for compile control.
# Helix keyboard customize
# you can edit follows 4 Variables
# jp: 以下の4つの変数を必要に応じて編集します。
OLED_ENABLE = no # OLED_ENABLE
LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
LED_ANIMATIONS = yes # LED animations
config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define
* HELIX_ROWS define move from config.h to rules.mk
* add readme.md
* rename readme.md to readme_jp.md
* add readme.md and modify readme_jp.md
