megamanmalte/qmk_firmware
0
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/rart/rart80
History
Ryan 47966dc2a6
Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303)
2023-04-06 18:00:54 +10:00
..
keymaps Reworked backlight keycodes. (#18961) 2022-11-06 08:11:59 +11:00
config.h Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
info.json Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
rart80.h [Keyboard] add rart80 (#18287) 2022-09-28 12:23:17 -07:00
readme.md [Keyboard] add rart80 (#18287) 2022-09-28 12:23:17 -07:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

[RART 80 Hotswap]

RART 80

PCB layout TKL, based on IMKG (Indonesia Mechanical Keyboard Group)

  • Keyboard Maintainer: Alabahuy
  • Hardware Supported: RART80 PCB, Atmega32a, Type C
  • Hardware Availability: Private GB

Make example for this keyboard (after setting up your build environment):

make rart/rart80:default

Flashing example for this keyboard:

make rart/rart80:default:flash

Bootloader

Enter the bootloader in 3 ways:

  • To Enter the bootloader you can short and hold boot pin, short reset pin, release reset and boot pin.

  • Bootmagic reset, hold down the key at (0,0) in the matrix (ESC) and plug in the keyboard.

  • Bootloader reset on the matrix, hold down key at (0,1) and plug in the keyboard

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.