qmk_firmware/keyboards/helix/rev2/keymaps/froggy/config.h
MakotoKurauchi 7498b184b7 Support ios to default keymap (#3118)
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL

* add define USB_MAX_POWER_CONSUMPTION

* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk

rules.mk: add 4 Variables for compile control.

   # Helix keyboard customize
   # you can edit follows 4 Variables
   #  jp: 以下の4つの変数を必要に応じて編集します。
   OLED_ENABLE = no            # OLED_ENABLE
   LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
   LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
   LED_ANIMATIONS = yes        # LED animations

config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define

* HELIX_ROWS define move from config.h to rules.mk

* add readme.md

* rename readme.md to readme_jp.md

* add readme.md and modify readme_jp.md

* change helix/ssd1306.c for select glcdfont.c position

* add variable LOCAL_GLCDFONT into each keymaps rules.mk

* Add iPhone/iPad LED support to Helix default keymap

* add Freggy keymap

* adjust the delay of serial.c

* change readme

* renumber _ADJUST for shrink program size
2018-06-04 08:14:35 -07:00

124 lines
3.1 KiB
C

/*
This is the c configuration file for the keymap
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
/* Use I2C or Serial */
#define USE_I2C
#define USE_SERIAL
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
// Helix keyboard OLED support
// see ./rules.mk: OLED_ENABLE=yes or no
#ifdef OLED_ENABLE
#define SSD1306OLED
#endif
/* Select rows configuration */
// Rows are 4 or 5
// #define HELIX_ROWS 5 see ./rules.mk
/* key matrix size */
// Rows are doubled-up
#if HELIX_ROWS == 4
#define MATRIX_ROWS 8
#define MATRIX_COLS 7
#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
#elif HELIX_ROWS == 5
#define MATRIX_ROWS 10
#define MATRIX_COLS 7
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
#else
#error "expected HELIX_ROWS 4 or 5"
#endif
#define USE_SERIAL_PD2
#define PREVENT_STUCK_MODIFIERS
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 200
#define ONESHOT_TAP_TOGGLE 5 /* Tapping this number of times holds the key until tapped this number of times again. */
#define ONESHOT_TIMEOUT 5000 /* Time (in ms) before the one shot key is released */
// Helix keyboard RGB LED support
//#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no
// see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes
#ifdef RGBLED_BACK
#if HELIX_ROWS == 4
#define RGBLED_NUM 25
#elif HELIX_ROWS == 5
#define RGBLED_NUM 32
#endif
#else
#define RGBLED_NUM 6
#endif
#ifndef IOS_DEVICE_ENABLE
#if RGBLED_NUM <= 6
#define RGBLIGHT_LIMIT_VAL 255
#else
#if HELIX_ROWS == 5
#define RGBLIGHT_LIMIT_VAL 120
#else
#define RGBLIGHT_LIMIT_VAL 130
#endif
#endif
#define RGBLIGHT_VAL_STEP 17
#else
#if RGBLED_NUM <= 6
#define RGBLIGHT_LIMIT_VAL 90
#else
#if HELIX_ROWS == 5
#define RGBLIGHT_LIMIT_VAL 35
#else
#define RGBLIGHT_LIMIT_VAL 45
#endif
#endif
#define RGBLIGHT_VAL_STEP 4
#endif
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
// USB_MAX_POWER_CONSUMPTION value for Helix keyboard
// 120 RGBoff, OLEDoff
// 120 OLED
// 330 RGB 6
// 300 RGB 32
// 310 OLED & RGB 32
#define USB_MAX_POWER_CONSUMPTION 400
#else
// fix iPhone and iPad power adapter issue
// iOS device need lessthan 100
#define USB_MAX_POWER_CONSUMPTION 100
#endif
#endif /* CONFIG_USER_H */