qmk_firmware/keyboards/4pplet/waffling60/rev_d_ansi
4pplet 44aad7b92b
[Keyboard] Add waffling60 Rev D ANSI Hotswap (#18579)
Co-authored-by: 4pplet <4pplet@protonmail.com>
Co-authored-by: 4pplet <stefan.ess@gmail.com>
2022-10-05 10:30:41 -07:00
..
keymaps [Keyboard] Add waffling60 Rev D ANSI Hotswap (#18579) 2022-10-05 10:30:41 -07:00
config.h [Keyboard] Add waffling60 Rev D ANSI Hotswap (#18579) 2022-10-05 10:30:41 -07:00
info.json [Keyboard] Add waffling60 Rev D ANSI Hotswap (#18579) 2022-10-05 10:30:41 -07:00
readme.md [Keyboard] Add waffling60 Rev D ANSI Hotswap (#18579) 2022-10-05 10:30:41 -07:00
rev_d_ansi.c [Keyboard] Add waffling60 Rev D ANSI Hotswap (#18579) 2022-10-05 10:30:41 -07:00
rev_d_ansi.h [Keyboard] Add waffling60 Rev D ANSI Hotswap (#18579) 2022-10-05 10:30:41 -07:00
rules.mk [Keyboard] Add waffling60 Rev D ANSI Hotswap (#18579) 2022-10-05 10:30:41 -07:00

waffling60

A 60% PCB for MX and alps switches, available in different configurations and layout supports.

More info: https://geekhack.org/index.php?topic=103531.0

Make example for this keyboard (after setting up your build environment):

make 4pplet/waffling60/rev_d_ansi:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.

  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it or tap the reset button.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Esc key, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.