125 lines
4 KiB
C
125 lines
4 KiB
C
/* Copyright 2018 Jack Humbert
|
|
* Copyright 2018 Yiancar
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/* This library is only valid for STM32 processors.
|
|
* This library follows the convention of the AVR i2c_master library.
|
|
* As a result addresses are expected to be already shifted (addr << 1).
|
|
* I2CD1 is the default driver which corresponds to pins B6 and B7. This
|
|
* can be changed.
|
|
* Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
|
|
* STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
|
|
* but using any other I2C pins should be trivial.
|
|
*/
|
|
|
|
#include "i2c_master.h"
|
|
#include "quantum.h"
|
|
#include <string.h>
|
|
#include <hal.h>
|
|
|
|
static uint8_t i2c_address;
|
|
|
|
// This configures the I2C clock to 400khz assuming a 48Mhz clock
|
|
// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
|
|
static const I2CConfig i2cconfig = {
|
|
STM32_TIMINGR_PRESC(0x00U) |
|
|
STM32_TIMINGR_SCLDEL(0x03U) | STM32_TIMINGR_SDADEL(0x01U) |
|
|
STM32_TIMINGR_SCLH(0x03U) | STM32_TIMINGR_SCLL(0x09U),
|
|
0,
|
|
0
|
|
};
|
|
|
|
static i2c_status_t chibios_to_qmk(const msg_t status) {
|
|
switch (status) {
|
|
case I2C_NO_ERROR:
|
|
return I2C_STATUS_SUCCESS;
|
|
case I2C_TIMEOUT:
|
|
return I2C_STATUS_TIMEOUT;
|
|
// I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
|
|
default:
|
|
return I2C_STATUS_ERROR;
|
|
}
|
|
}
|
|
|
|
__attribute__ ((weak))
|
|
void i2c_init(void)
|
|
{
|
|
// Try releasing special pins for a short time
|
|
palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
|
|
palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
|
|
|
|
chThdSleepMilliseconds(10);
|
|
|
|
palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(1) | PAL_STM32_OTYPE_OPENDRAIN);
|
|
palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(1) | PAL_STM32_OTYPE_OPENDRAIN);
|
|
|
|
//i2cInit(); //This is invoked by halInit() so no need to redo it.
|
|
}
|
|
|
|
i2c_status_t i2c_start(uint8_t address)
|
|
{
|
|
i2c_address = address;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
return I2C_STATUS_SUCCESS;
|
|
}
|
|
|
|
i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout)
|
|
{
|
|
i2c_address = address;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
i2cAcquireBus(&I2C_DRIVER);
|
|
msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
|
|
i2cReleaseBus(&I2C_DRIVER);
|
|
return chibios_to_qmk(status);
|
|
}
|
|
|
|
i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
|
|
{
|
|
i2c_address = address;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout));
|
|
return chibios_to_qmk(status);
|
|
}
|
|
|
|
i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout)
|
|
{
|
|
i2c_address = devaddr;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
|
|
uint8_t complete_packet[length + 1];
|
|
for(uint8_t i = 0; i < length; i++)
|
|
{
|
|
complete_packet[i+1] = data[i];
|
|
}
|
|
complete_packet[0] = regaddr;
|
|
|
|
msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
|
|
return chibios_to_qmk(status);
|
|
}
|
|
|
|
i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
|
|
{
|
|
i2c_address = devaddr;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout));
|
|
return chibios_to_qmk(status);
|
|
}
|
|
|
|
void i2c_stop(void)
|
|
{
|
|
i2cStop(&I2C_DRIVER);
|
|
}
|