megamanmalte/qmk_firmware
0
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/cipulot/ec_prox/jis
History
Joel Challis e884e42ce9
Generalise ADC driver source inclusion (#22448)
2023-11-12 22:30:27 +00:00
..
keymaps EC Pro X JIS Layout Touch-Up (#21260) 2023-06-20 15:40:31 -07:00
config.h EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
ec_switch_matrix.c EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
ec_switch_matrix.h EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
halconf.h EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
info.json EC Pro X JIS Layout Touch-Up (#21260) 2023-06-20 15:40:31 -07:00
matrix.c EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
mcuconf.h EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
readme.md EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
rules.mk Generalise ADC driver source inclusion (#22448) 2023-11-12 22:30:27 +00:00

readme.md

EC Pro X JIS

EC Pro X JIS PCB

Open source replacement PCB kit for the HHKB Pro 2 and Pro 3 keyboards using the JIS case.

  • Keyboard Maintainer: cipulot
  • Hardware Supported: EC Pro X JP PCB
  • Hardware Availability: EC Pro X

Make example for this keyboard (after setting up your build environment):

make cipulot/ec_prox/jis:default

Flashing example for this keyboard:

make cipulot/ec_prox/jis:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical Boot0 pins: Short the Boot0 pins on the back of the PCB while plugging in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available