qmk_firmware/tmk_core/common/keyboard.c
James Young 1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00

535 lines
14 KiB
C

/*
Copyright 2011, 2012, 2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include "keyboard.h"
#include "matrix.h"
#include "keymap.h"
#include "host.h"
#include "led.h"
#include "keycode.h"
#include "timer.h"
#include "sync_timer.h"
#include "print.h"
#include "debug.h"
#include "command.h"
#include "util.h"
#include "sendchar.h"
#include "eeconfig.h"
#include "action_layer.h"
#ifdef BACKLIGHT_ENABLE
# include "backlight.h"
#endif
#ifdef MOUSEKEY_ENABLE
# include "mousekey.h"
#endif
#ifdef PS2_MOUSE_ENABLE
# include "ps2_mouse.h"
#endif
#ifdef SERIAL_MOUSE_ENABLE
# include "serial_mouse.h"
#endif
#ifdef ADB_MOUSE_ENABLE
# include "adb.h"
#endif
#ifdef RGBLIGHT_ENABLE
# include "rgblight.h"
#endif
#ifdef LED_MATRIX_ENABLE
# include "led_matrix.h"
#endif
#ifdef RGB_MATRIX_ENABLE
# include "rgb_matrix.h"
#endif
#ifdef ENCODER_ENABLE
# include "encoder.h"
#endif
#ifdef STENO_ENABLE
# include "process_steno.h"
#endif
#ifdef SERIAL_LINK_ENABLE
# include "serial_link/system/serial_link.h"
#endif
#ifdef VISUALIZER_ENABLE
# include "visualizer/visualizer.h"
#endif
#ifdef POINTING_DEVICE_ENABLE
# include "pointing_device.h"
#endif
#ifdef MIDI_ENABLE
# include "process_midi.h"
#endif
#ifdef JOYSTICK_ENABLE
# include "process_joystick.h"
#endif
#ifdef HD44780_ENABLE
# include "hd44780.h"
#endif
#ifdef QWIIC_ENABLE
# include "qwiic.h"
#endif
#ifdef OLED_DRIVER_ENABLE
# include "oled_driver.h"
#endif
#ifdef VELOCIKEY_ENABLE
# include "velocikey.h"
#endif
#ifdef VIA_ENABLE
# include "via.h"
#endif
#ifdef DIP_SWITCH_ENABLE
# include "dip_switch.h"
#endif
#ifdef STM32_EEPROM_ENABLE
# include "eeprom_stm32.h"
#endif
#ifdef EEPROM_DRIVER
# include "eeprom_driver.h"
#endif
static uint32_t last_input_modification_time = 0;
uint32_t last_input_activity_time(void) { return last_input_modification_time; }
uint32_t last_input_activity_elapsed(void) { return timer_elapsed32(last_input_modification_time); }
static uint32_t last_matrix_modification_time = 0;
uint32_t last_matrix_activity_time(void) { return last_matrix_modification_time; }
uint32_t last_matrix_activity_elapsed(void) { return timer_elapsed32(last_matrix_modification_time); }
void last_matrix_activity_trigger(void) { last_matrix_modification_time = last_input_modification_time = timer_read32(); }
static uint32_t last_encoder_modification_time = 0;
uint32_t last_encoder_activity_time(void) { return last_encoder_modification_time; }
uint32_t last_encoder_activity_elapsed(void) { return timer_elapsed32(last_encoder_modification_time); }
void last_encoder_activity_trigger(void) { last_encoder_modification_time = last_input_modification_time = timer_read32(); }
// Only enable this if console is enabled to print to
#if defined(DEBUG_MATRIX_SCAN_RATE)
static uint32_t matrix_timer = 0;
static uint32_t matrix_scan_count = 0;
static uint32_t last_matrix_scan_count = 0;
void matrix_scan_perf_task(void) {
matrix_scan_count++;
uint32_t timer_now = timer_read32();
if (TIMER_DIFF_32(timer_now, matrix_timer) > 1000) {
# if defined(CONSOLE_ENABLE)
dprintf("matrix scan frequency: %lu\n", matrix_scan_count);
# endif
last_matrix_scan_count = matrix_scan_count;
matrix_timer = timer_now;
matrix_scan_count = 0;
}
}
uint32_t get_matrix_scan_rate(void) { return last_matrix_scan_count; }
#else
# define matrix_scan_perf_task()
#endif
#ifdef MATRIX_HAS_GHOST
extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
static matrix_row_t get_real_keys(uint8_t row, matrix_row_t rowdata) {
matrix_row_t out = 0;
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
// read each key in the row data and check if the keymap defines it as a real key
if (pgm_read_byte(&keymaps[0][row][col]) && (rowdata & (1 << col))) {
// this creates new row data, if a key is defined in the keymap, it will be set here
out |= 1 << col;
}
}
return out;
}
static inline bool popcount_more_than_one(matrix_row_t rowdata) {
rowdata &= rowdata - 1; // if there are less than two bits (keys) set, rowdata will become zero
return rowdata;
}
static inline bool has_ghost_in_row(uint8_t row, matrix_row_t rowdata) {
/* No ghost exists when less than 2 keys are down on the row.
If there are "active" blanks in the matrix, the key can't be pressed by the user,
there is no doubt as to which keys are really being pressed.
The ghosts will be ignored, they are KC_NO. */
rowdata = get_real_keys(row, rowdata);
if ((popcount_more_than_one(rowdata)) == 0) {
return false;
}
/* Ghost occurs when the row shares a column line with other row,
and two columns are read on each row. Blanks in the matrix don't matter,
so they are filtered out.
If there are two or more real keys pressed and they match columns with
at least two of another row's real keys, the row will be ignored. Keep in mind,
we are checking one row at a time, not all of them at once.
*/
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
if (i != row && popcount_more_than_one(get_real_keys(i, matrix_get_row(i)) & rowdata)) {
return true;
}
}
return false;
}
#endif
void disable_jtag(void) {
// To use PF4-7 (PC2-5 on ATmega32A), disable JTAG by writing JTD bit twice within four cycles.
#if (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
MCUCR |= _BV(JTD);
MCUCR |= _BV(JTD);
#elif defined(__AVR_ATmega32A__)
MCUCSR |= _BV(JTD);
MCUCSR |= _BV(JTD);
#endif
}
/** \brief matrix_setup
*
* FIXME: needs doc
*/
__attribute__((weak)) void matrix_setup(void) {}
/** \brief keyboard_pre_init_user
*
* FIXME: needs doc
*/
__attribute__((weak)) void keyboard_pre_init_user(void) {}
/** \brief keyboard_pre_init_kb
*
* FIXME: needs doc
*/
__attribute__((weak)) void keyboard_pre_init_kb(void) { keyboard_pre_init_user(); }
/** \brief keyboard_post_init_user
*
* FIXME: needs doc
*/
__attribute__((weak)) void keyboard_post_init_user() {}
/** \brief keyboard_post_init_kb
*
* FIXME: needs doc
*/
__attribute__((weak)) void keyboard_post_init_kb(void) { keyboard_post_init_user(); }
/** \brief keyboard_setup
*
* FIXME: needs doc
*/
void keyboard_setup(void) {
#ifndef NO_JTAG_DISABLE
disable_jtag();
#endif
print_set_sendchar(sendchar);
#ifdef STM32_EEPROM_ENABLE
EEPROM_Init();
#endif
#ifdef EEPROM_DRIVER
eeprom_driver_init();
#endif
matrix_setup();
keyboard_pre_init_kb();
}
/** \brief is_keyboard_master
*
* FIXME: needs doc
*/
__attribute__((weak)) bool is_keyboard_master(void) { return true; }
/** \brief is_keyboard_left
*
* FIXME: needs doc
*/
__attribute__((weak)) bool is_keyboard_left(void) { return true; }
/** \brief should_process_keypress
*
* Override this function if you have a condition where keypresses processing should change:
* - splits where the slave side needs to process for rgb/oled functionality
*/
__attribute__((weak)) bool should_process_keypress(void) { return is_keyboard_master(); }
/** \brief housekeeping_task_kb
*
* Override this function if you have a need to execute code for every keyboard main loop iteration.
* This is specific to keyboard-level functionality.
*/
__attribute__((weak)) void housekeeping_task_kb(void) {}
/** \brief housekeeping_task_user
*
* Override this function if you have a need to execute code for every keyboard main loop iteration.
* This is specific to user/keymap-level functionality.
*/
__attribute__((weak)) void housekeeping_task_user(void) {}
/** \brief housekeeping_task
*
* Invokes hooks for executing code after QMK is done after each loop iteration.
*/
void housekeeping_task(void) {
housekeeping_task_kb();
housekeeping_task_user();
}
/** \brief keyboard_init
*
* FIXME: needs doc
*/
void keyboard_init(void) {
timer_init();
sync_timer_init();
matrix_init();
#ifdef VIA_ENABLE
via_init();
#endif
#ifdef QWIIC_ENABLE
qwiic_init();
#endif
#ifdef OLED_DRIVER_ENABLE
oled_init(OLED_ROTATION_0);
#endif
#ifdef PS2_MOUSE_ENABLE
ps2_mouse_init();
#endif
#ifdef SERIAL_MOUSE_ENABLE
serial_mouse_init();
#endif
#ifdef ADB_MOUSE_ENABLE
adb_mouse_init();
#endif
#ifdef BACKLIGHT_ENABLE
backlight_init();
#endif
#ifdef RGBLIGHT_ENABLE
rgblight_init();
#endif
#ifdef ENCODER_ENABLE
encoder_init();
#endif
#ifdef STENO_ENABLE
steno_init();
#endif
#ifdef POINTING_DEVICE_ENABLE
pointing_device_init();
#endif
#if defined(NKRO_ENABLE) && defined(FORCE_NKRO)
keymap_config.nkro = 1;
eeconfig_update_keymap(keymap_config.raw);
#endif
#ifdef DIP_SWITCH_ENABLE
dip_switch_init();
#endif
#if defined(DEBUG_MATRIX_SCAN_RATE) && defined(CONSOLE_ENABLE)
debug_enable = true;
#endif
keyboard_post_init_kb(); /* Always keep this last */
}
/** \brief key_event_task
*
* This function is responsible for calling into other systems when they need to respond to electrical switch press events.
* This is differnet than keycode events as no layer processing, or filtering occurs.
*/
void switch_events(uint8_t row, uint8_t col, bool pressed) {
#if defined(LED_MATRIX_ENABLE)
process_led_matrix(row, col, pressed);
#endif
#if defined(RGB_MATRIX_ENABLE)
process_rgb_matrix(row, col, pressed);
#endif
}
/** \brief Keyboard task: Do keyboard routine jobs
*
* Do routine keyboard jobs:
*
* * scan matrix
* * handle mouse movements
* * run visualizer code
* * handle midi commands
* * light LEDs
*
* This is repeatedly called as fast as possible.
*/
void keyboard_task(void) {
static matrix_row_t matrix_prev[MATRIX_ROWS];
static uint8_t led_status = 0;
matrix_row_t matrix_row = 0;
matrix_row_t matrix_change = 0;
#ifdef QMK_KEYS_PER_SCAN
uint8_t keys_processed = 0;
#endif
#ifdef ENCODER_ENABLE
bool encoders_changed = false;
#endif
uint8_t matrix_changed = matrix_scan();
if (matrix_changed) last_matrix_activity_trigger();
for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
matrix_row = matrix_get_row(r);
matrix_change = matrix_row ^ matrix_prev[r];
if (matrix_change) {
#ifdef MATRIX_HAS_GHOST
if (has_ghost_in_row(r, matrix_row)) {
continue;
}
#endif
if (debug_matrix) matrix_print();
matrix_row_t col_mask = 1;
for (uint8_t c = 0; c < MATRIX_COLS; c++, col_mask <<= 1) {
if (matrix_change & col_mask) {
if (should_process_keypress()) {
action_exec((keyevent_t){
.key = (keypos_t){.row = r, .col = c}, .pressed = (matrix_row & col_mask), .time = (timer_read() | 1) /* time should not be 0 */
});
}
// record a processed key
matrix_prev[r] ^= col_mask;
switch_events(r, c, (matrix_row & col_mask));
#ifdef QMK_KEYS_PER_SCAN
// only jump out if we have processed "enough" keys.
if (++keys_processed >= QMK_KEYS_PER_SCAN)
#endif
// process a key per task call
goto MATRIX_LOOP_END;
}
}
}
}
// call with pseudo tick event when no real key event.
#ifdef QMK_KEYS_PER_SCAN
// we can get here with some keys processed now.
if (!keys_processed)
#endif
action_exec(TICK);
MATRIX_LOOP_END:
#ifdef DEBUG_MATRIX_SCAN_RATE
matrix_scan_perf_task();
#endif
#if defined(RGBLIGHT_ENABLE)
rgblight_task();
#endif
#ifdef LED_MATRIX_ENABLE
led_matrix_task();
#endif
#ifdef RGB_MATRIX_ENABLE
rgb_matrix_task();
#endif
#if defined(BACKLIGHT_ENABLE)
# if defined(BACKLIGHT_PIN) || defined(BACKLIGHT_PINS)
backlight_task();
# endif
#endif
#ifdef ENCODER_ENABLE
encoders_changed = encoder_read();
if (encoders_changed) last_encoder_activity_trigger();
#endif
#ifdef QWIIC_ENABLE
qwiic_task();
#endif
#ifdef OLED_DRIVER_ENABLE
oled_task();
# ifndef OLED_DISABLE_TIMEOUT
// Wake up oled if user is using those fabulous keys or spinning those encoders!
# ifdef ENCODER_ENABLE
if (matrix_changed || encoders_changed) oled_on();
# else
if (matrix_changed) oled_on();
# endif
# endif
#endif
#ifdef MOUSEKEY_ENABLE
// mousekey repeat & acceleration
mousekey_task();
#endif
#ifdef PS2_MOUSE_ENABLE
ps2_mouse_task();
#endif
#ifdef SERIAL_MOUSE_ENABLE
serial_mouse_task();
#endif
#ifdef ADB_MOUSE_ENABLE
adb_mouse_task();
#endif
#ifdef SERIAL_LINK_ENABLE
serial_link_update();
#endif
#ifdef VISUALIZER_ENABLE
visualizer_update(default_layer_state, layer_state, visualizer_get_mods(), host_keyboard_leds());
#endif
#ifdef POINTING_DEVICE_ENABLE
pointing_device_task();
#endif
#ifdef MIDI_ENABLE
midi_task();
#endif
#ifdef VELOCIKEY_ENABLE
if (velocikey_enabled()) {
velocikey_decelerate();
}
#endif
#ifdef JOYSTICK_ENABLE
joystick_task();
#endif
// update LED
if (led_status != host_keyboard_leds()) {
led_status = host_keyboard_leds();
keyboard_set_leds(led_status);
}
}
/** \brief keyboard set leds
*
* FIXME: needs doc
*/
void keyboard_set_leds(uint8_t leds) {
if (debug_keyboard) {
debug("keyboard_set_led: ");
debug_hex8(leds);
debug("\n");
}
led_set(leds);
}