History

Ryan 2da0827d4f Remove matrix size defines (#19581 )		2023-02-17 16:08:25 +11:00
..
keymaps	[Core] Replace Tapping Force Hold feature with Quick Tap Term (#17007 )	2022-12-12 16:52:22 +01:00
rev1	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00
config.h	Remove matrix size defines (#19581 )	2023-02-17 16:08:25 +11:00
halconf.h	Tidy up rgbkb/mun (#13801 )	2021-08-05 00:59:50 +01:00
mcuconf.h	Tidy up rgbkb/mun (#13801 )	2021-08-05 00:59:50 +01:00
mun.c	Tidy up rgbkb/mun (#13801 )	2021-08-05 00:59:50 +01:00
mun.h	Keyboards/RGBKB/Mün (#13239 )	2021-06-25 22:00:21 -07:00
readme.md	Keyboards/RGBKB/Mün (#13239 )	2021-06-25 22:00:21 -07:00
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

readme.md

Mün

Mün is powered by STM32 with full QMK support. Each key has super-bright RGB backlighting and MX Kailh hotswap sockets. No soldering is required to get a fully functioning keyboard. There are an additional 14 rear-facing RGB LEDs on each side. Each half can be configured to run as master or slave with the two USB-C ports. They also support up to two rotary encoders and one OLED panel per half.

Keyboard Maintainer: Legonut
Hardware Supported: Mün PCB R1.0, R1.1, R1.2 Hardware Availability: RGBKB

Make example for this keyboard (after setting up your build environment):

make rgbkb/mun:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.