931a52d1ae
* Support for the Paladin64 PCB * Paladin64: Added readme. Added the bootloader option to rules.mk * Fixed the formatting * fixed the flash command
125 lines
3.8 KiB
C
Executable file
125 lines
3.8 KiB
C
Executable file
#ifndef CONFIG_H
|
|
#define CONFIG_H
|
|
|
|
#include "config_common.h"
|
|
|
|
/* USB Device descriptor parameter */
|
|
#define VENDOR_ID 0xFEED
|
|
#define PRODUCT_ID 0x6060
|
|
#define DEVICE_VER 0x0001
|
|
#define MANUFACTURER inachie
|
|
#define PRODUCT paladin64
|
|
#define DESCRIPTION Paladin64 ALPS 64 keyboard with trackpoint and underglow
|
|
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 8
|
|
#define MATRIX_COLS 8
|
|
|
|
#ifdef PS2_USE_USART
|
|
#define PS2_CLOCK_PORT PORTD
|
|
#define PS2_CLOCK_PIN PIND
|
|
#define PS2_CLOCK_DDR DDRD
|
|
#define PS2_CLOCK_BIT 5
|
|
#define PS2_DATA_PORT PORTD
|
|
#define PS2_DATA_PIN PIND
|
|
#define PS2_DATA_DDR DDRD
|
|
#define PS2_DATA_BIT 2
|
|
|
|
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling
|
|
* edge */
|
|
/* set DDR of CLOCK as input to be slave */
|
|
#define PS2_USART_INIT() do { \
|
|
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
|
|
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
|
|
UCSR1C = ((1 << UMSEL10) | \
|
|
(3 << UPM10) | \
|
|
(0 << USBS1) | \
|
|
(3 << UCSZ10) | \
|
|
(0 << UCPOL1)); \
|
|
UCSR1A = 0; \
|
|
UBRR1H = 0; \
|
|
UBRR1L = 0; \
|
|
} while (0)
|
|
#define PS2_USART_RX_INT_ON() do { \
|
|
UCSR1B = ((1 << RXCIE1) | \
|
|
(1 << RXEN1)); \
|
|
} while (0)
|
|
#define PS2_USART_RX_POLL_ON() do { \
|
|
UCSR1B = (1 << RXEN1); \
|
|
} while (0)
|
|
#define PS2_USART_OFF() do { \
|
|
UCSR1C = 0; \
|
|
UCSR1B &= ~((1 << RXEN1) | \
|
|
(1 << TXEN1)); \
|
|
} while (0)
|
|
#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
|
|
#define PS2_USART_RX_DATA UDR1
|
|
#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
|
|
#define PS2_USART_RX_VECT USART1_RX_vect
|
|
#endif
|
|
|
|
#ifdef PS2_USE_INT
|
|
#define PS2_CLOCK_PORT PORTD
|
|
#define PS2_CLOCK_PIN PIND
|
|
#define PS2_CLOCK_DDR DDRD
|
|
#define PS2_CLOCK_BIT 2
|
|
#define PS2_DATA_PORT PORTD
|
|
#define PS2_DATA_PIN PIND
|
|
#define PS2_DATA_DDR DDRD
|
|
#define PS2_DATA_BIT 5
|
|
|
|
#define PS2_INT_INIT() do { \
|
|
EICRA |= ((1<<ISC21) | \
|
|
(0<<ISC20)); \
|
|
} while (0)
|
|
#define PS2_INT_ON() do { \
|
|
EIMSK |= (1<<INT2); \
|
|
} while (0)
|
|
#define PS2_INT_OFF() do { \
|
|
EIMSK &= ~(1<<INT2); \
|
|
} while (0)
|
|
#define PS2_INT_VECT INT2_vect
|
|
|
|
#endif
|
|
|
|
/* key matrix pins */
|
|
#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, D6, B0, D3 }
|
|
#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, D1 }
|
|
#define UNUSED_PINS
|
|
|
|
/* COL2ROW or ROW2COL */
|
|
#define DIODE_DIRECTION COL2ROW
|
|
|
|
/* number of backlight levels */
|
|
|
|
#ifdef BACKLIGHT_PIN
|
|
#define BACKLIGHT_LEVELS 3
|
|
#endif
|
|
|
|
/* Set 0 if debouncing isn't needed */
|
|
#define DEBOUNCING_DELAY 5
|
|
|
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
#define LOCKING_SUPPORT_ENABLE
|
|
|
|
/* Locking resynchronize hack */
|
|
#define LOCKING_RESYNC_ENABLE
|
|
|
|
/* key combination for command */
|
|
#define IS_COMMAND() ( \
|
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
|
)
|
|
|
|
/* prevent stuck modifiers */
|
|
#define PREVENT_STUCK_MODIFIERS
|
|
#define RGB_DI_PIN D0
|
|
#ifdef RGB_DI_PIN
|
|
#define RGBLIGHT_ANIMATIONS
|
|
#define RGBLED_NUM 14
|
|
#define RGBLIGHT_HUE_STEP 10
|
|
#define RGBLIGHT_SAT_STEP 17
|
|
#define RGBLIGHT_VAL_STEP 12
|
|
#endif
|
|
|
|
#endif
|