qmk_firmware/keyboards/planck/keymaps/espynn/keymap.c
Nikolaus Wittenstein 8ddbf7f59f Fix spelling of "persistent"
Fixes #1201.
2017-05-11 15:32:35 -04:00

151 lines
6 KiB
C

#include "planck.h"
#include "action_layer.h"
#include "eeconfig.h"
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
#endif
#define PREVENT_STUCK_MODIFIERS
extern keymap_config_t keymap_config;
// Symbolic names for macro IDs.
#define _QWERTY 0 // QUERTY layer
#define _LOWER 1 // Lower layer
#define _RAISE 2 // Raise layer
#define _CUSTOM 3 // Custom layer (LOWER + RAISE)
#define _BL 4 // Backlight
#define _CUS0 5 // Mobile#
#define _CUS1 6 // signature
#define _CUS2 7 // macro 2
#define _CUS3 8 // macro 3
#define _CUS4 9 // macro 4
#define _CUS5 10 // email
#define _COPY 11 // copy
#define _PASTE 12 // paste
#define _CUT 13 // cut
// Macro shortcuts.
#define QWERTY M(_LOWER)
#define LOWER M(_LOWER)
#define RAISE M(_RAISE)
#define CUSTOM M(_CUSTOM)
#define BL M(_BL)
#define CUS0 M(_CUS0)
#define CUS1 M(_CUS1)
#define CUS2 M(_CUS2)
#define CUS3 M(_CUS3)
#define CUS4 M(_CUS4)
#define CUS5 M(_CUS5)
#define COPY M(_COPY)
#define PASTE M(_PASTE)
#define CUT M(_CUT)
// Func macro definitions.
#define LWR_PGDN FUNC(0) // Tap for PgDn, hold for LOWER
#define RSE_PGUP FUNC(1) // Tap for PgUp, hold for RAISE
#define CTL_CAPS FUNC(2) // Tap for Caps, hold for Ctrl (DOESN'T SEEM TO WORK)
#define SFT_ENT FUNC(3) // Tap for Enter, hold for Shift
#define ZM_NRM FUNC(4) // Zoom normal
#define ZM_IN FUNC(5) // Zoom out
#define ZM_OUT FUNC(6) // Zoom in
// Enable these functions using FUNC(n) macro.
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_PGDN),
[1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_PGUP),
[2] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_CAPS),
[3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
[4] = ACTION_MODS_KEY(MOD_LCTL, KC_0),
[5] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS),
[6] = ACTION_MODS_KEY(MOD_LCTL, KC_PLUS),
[7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS),
};
// This config can be found at Keyboard layout editor site: https://goo.gl/cF7uIO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = { /* QWERTY */
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
{KC_DEL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT},
{KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
[_LOWER] = { /* LOWER */
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_UNDS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_MINS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, ZM_NRM, ZM_IN, ZM_OUT, KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
},
[_RAISE] = { /* RAISE */
{KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_UNDS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PLUS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, S(KC_COMM), S(KC_DOT), KC_BSLS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
[_CUSTOM] = { /* CUSTOM */
{KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0, CUS3, CUS4, KC_TRNS, KC_F12, KC_TRNS},
{KC_TRNS, KC_TRNS, CUT, COPY, PASTE, CUS1, CUS5, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{BL, RESET, LALT(LCTL(KC_DEL)), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
}
};
// Set a layer persistently.
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
// Macro actions for each corresponding ID.
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case _RAISE: // Raised layer.
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _CUSTOM);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _CUSTOM);
}
break;
case _LOWER: // Lowered layer.
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _CUSTOM);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _CUSTOM);
}
break;
case _BL: // Backlight
if (record->event.pressed) {
register_code(KC_RSFT);
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
} else {
unregister_code(KC_RSFT);
}
break;
case _CUS0: // enter your mobile# here
return MACRODOWN(T(9), T(9), T(9), T(MINS),T(9), T(9), T(9), T(MINS),T(9), T(9), T(9), T(9),END);
case _CUS1: // signature line for email
return MACRODOWN(T(ENT), T(ENT), T(MINS), T(J), T(W), END);
case _CUS2: // Custom macro 2
return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_L), UP(KC_LSFT), END );
case _CUS3: // custom macro 3
return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_F), UP(KC_LSFT), END );
case _CUS4: // custom macro 4
return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_I), UP(KC_LSFT), END );
case _CUS5: // Enter your email here
return MACRODOWN( TYPE(KC_F),
DOWN(KC_LSFT), TYPE(KC_2), UP(KC_LSFT),
TYPE(KC_G), TYPE(KC_M), TYPE(KC_A), TYPE(KC_I), TYPE(KC_L), TYPE(KC_DOT), TYPE(KC_C), TYPE(KC_O), TYPE(KC_M), END );
case _CUT: //cut macro
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_X), UP(KC_LCTL), END );
case _COPY: // copy macro
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_C), UP(KC_LCTL), END );
case _PASTE: // paste macro
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_V), UP(KC_LCTL), END );
};
return MACRO_NONE;
}