qmk_firmware/keyboards/hs60/v1/v1.c
2023-10-04 20:12:50 +11:00

394 lines
13 KiB
C

/* Copyright 2018 Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "quantum.h"
// Please ignore this is for upcoming features
/*#ifdef RAW_ENABLE
void raw_hid_receive( uint8_t *data, uint8_t length )
{
uint8_t command = data[0];
switch ( command )
{
case id_protocol_version:
{
msg_protocol_version *msg = (msg_protocol_version*)&data[1];
msg->version = PROTOCOL_VERSION;
break;
}
#if USE_KEYMAPS_IN_EEPROM
case id_keymap_keycode_load:
{
msg_keymap_keycode_load *msg = (msg_keymap_keycode_load*)&data[1];
msg->keycode = keymap_keycode_load( msg->layer, msg->row, msg->column );
break;
}
case id_keymap_keycode_save:
{
msg_keymap_keycode_save *msg = (msg_keymap_keycode_save*)&data[1];
keymap_keycode_save( msg->layer, msg->row, msg->column, msg->keycode);
break;
}
case id_keymap_default_save:
{
keymap_default_save();
break;
}
#endif // USE_KEYMAPS_IN_EEPROM
case id_backlight_config_set_values:
{
msg_backlight_config_set_values *msg = (msg_backlight_config_set_values*)&data[1];
backlight_config_set_values(msg);
backlight_config_save();
break;
}
case id_backlight_config_set_alphas_mods:
{
msg_backlight_config_set_alphas_mods *msg = (msg_backlight_config_set_alphas_mods*)&data[1];
backlight_config_set_alphas_mods( msg->alphas_mods );
backlight_config_save();
break;
}
case id_backlight_set_key_color:
{
msg_backlight_set_key_color *msg = (msg_backlight_set_key_color*)&data[1];
backlight_set_key_color(msg->row, msg->column, msg->hsv);
break;
}
case id_system_get_state:
{
msg_system_state *msg = (msg_system_state*)&data[1];
msg->value = backlight_get_tick();
break;
}
default:
{
// Unhandled message.
data[0] = id_unhandled;
break;
}
}
// Return same buffer with values changed
raw_hid_send( data, length );
}
#endif*/
#ifdef HS60_ANSI
const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
* | | G location
* | | | B location
* | | | | */
{0, C1_1, C3_2, C4_2}, //A1
{0, C1_2, C2_2, C4_3}, //A2
{0, C1_3, C2_3, C3_3}, //A3
{0, C1_4, C2_4, C3_4}, //A4
{0, C1_5, C2_5, C3_5}, //A5
{0, C1_6, C2_6, C3_6}, //A6
{0, C1_7, C2_7, C3_7}, //A7
{0, C1_8, C2_8, C3_8}, //A8
{0, C9_1, C8_1, C7_1}, //A9
{0, C9_2, C8_2, C7_2}, //A10
{0, C9_3, C8_3, C7_3}, //A11
{0, C9_4, C8_4, C7_4}, //A12
{0, C9_5, C8_5, C7_5}, //A13
{0, C9_6, C8_6, C7_6}, //A14
{0, C9_7, C8_7, C6_6}, //A15
{0, C9_8, C7_7, C6_7}, //A16
{0, C1_9, C3_10, C4_10}, //B1
{0, C1_10, C2_10, C4_11}, //B2
{0, C1_11, C2_11, C3_11}, //B3
{0, C1_12, C2_12, C3_12}, //B4
{0, C1_13, C2_13, C3_13}, //B5
{0, C1_14, C2_14, C3_14}, //B6
{0, C1_15, C2_15, C3_15}, //B7
{0, C1_16, C2_16, C3_16}, //B8
{0, C9_9, C8_9, C7_9}, //B9
{0, C9_10, C8_10, C7_10}, //B10
{0, C9_11, C8_11, C7_11}, //B11
{0, C9_12, C8_12, C7_12}, //B12
{0, C9_13, C8_13, C7_13}, //B13
{0, C9_14, C8_14, C7_14}, //B14
{1, C1_1, C3_2, C4_2}, //C1
{1, C1_2, C2_2, C4_3}, //C2
{1, C1_3, C2_3, C3_3}, //C3
{1, C1_4, C2_4, C3_4}, //C4
{1, C1_5, C2_5, C3_5}, //C5
{1, C1_6, C2_6, C3_6}, //C6
{1, C1_7, C2_7, C3_7}, //C7
{1, C1_8, C2_8, C3_8}, //C8
{1, C9_1, C8_1, C7_1}, //C9
{1, C9_2, C8_2, C7_2}, //C10
{1, C9_3, C8_3, C7_3}, //C11
{1, C9_4, C8_4, C7_4}, //C12
{1, C9_5, C8_5, C7_5}, //C13
{1, C9_6, C8_6, C7_6}, //C14
{1, C9_7, C8_7, C6_6}, //C15
{1, C9_8, C7_7, C6_7}, //C16
{1, C1_9, C3_10, C4_10}, //D1
//D2
{1, C1_11, C2_11, C3_11}, //D3
{1, C1_12, C2_12, C3_12}, //D4
{1, C1_13, C2_13, C3_13}, //D5
{1, C1_14, C2_14, C3_14}, //D6
{1, C1_15, C2_15, C3_15}, //D7
{1, C1_16, C2_16, C3_16}, //D8
{1, C9_9, C8_9, C7_9}, //D9
{1, C9_10, C8_10, C7_10}, //D10
{1, C9_11, C8_11, C7_11}, //D11
{1, C9_12, C8_12, C7_12}, //D12
{1, C9_13, C8_13, C7_13}, //D13
{1, C9_14, C8_14, C7_14}, //D14
{1, C9_15, C8_15, C6_14}, //D15
{1, C9_16, C7_15, C6_15} //D16
};
led_config_t g_led_config = { {
{ 36, 35, 34, 33, 32, 31, 30, 6, 5, 4, 3, 2, 1, 0 },
{ 37, 38, 39, 40, 41, 42, 43, 7, 8, 9, 10, 11, 12, NO_LED },
{ 48, 49, 50, 51, 52, 45, 44, 20, 21, 22, 23, 15, 14, 13 },
{ 47, NO_LED, 46, 53, 54, 55, 56, 19, 18, 17, 16, 24, NO_LED, 25 },
{ 60, 59, 58, 57, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, 29, 28, 27, 26 }
}, {
//A1-A16
{ 224, 0 }, { 204, 0 }, { 187, 0 }, { 170, 0 }, { 153, 0 }, { 136, 0 }, { 119, 0 }, { 119, 16 }, { 136, 16 }, { 153, 16 }, { 170, 16 }, { 187, 16 }, { 204, 16 }, { 224, 32 },
{ 224, 16 }, { 197, 32 },
//B1-B14
{ 170, 48 }, { 153, 48 }, { 136, 48 }, { 119, 48 }, { 119, 32 }, { 136, 32 }, { 153, 32 }, { 170, 32 }, { 187, 48 }, { 214, 48 }, { 224, 64 }, { 204, 64 }, { 187, 64 }, { 170, 64 },
//C1-C16
{ 102, 0 }, { 85, 0 }, { 68, 0 }, { 51, 0 }, { 34, 0 }, { 17, 0 }, { 0, 0 }, { 0, 16 }, { 17, 16 }, { 34, 16 }, { 51, 16 }, { 68, 16 }, { 85, 16 }, { 102, 16 },
{ 102, 32 }, { 85, 32 },
//D1-D16
{ 32, 48 }, { 10, 48 }, { 0, 32 }, { 17, 32 }, { 34, 32 }, { 51, 32 }, { 68, 32 }, { 51, 48 }, { 68, 48 }, { 85, 48 }, { 102, 48 }, { 102, 64 }, { 34, 68 }, { 17, 68 },
{ 0, 68 }
}, {
//A1-A16
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
4, 4,
//B1-B14
4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, 1,
//C1-C16
4, 4, 4, 4, 4, 4, 1, 1, 4, 4, 4, 4, 4, 4,
4, 4,
//D1-D16
4, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
1
} };
#else
const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
* | | G location
* | | | B location
* | | | | */
{0, C1_1, C3_2, C4_2}, //A1
{0, C1_2, C2_2, C4_3}, //A2
{0, C1_3, C2_3, C3_3}, //A3
{0, C1_4, C2_4, C3_4}, //A4
{0, C1_5, C2_5, C3_5}, //A5
{0, C1_6, C2_6, C3_6}, //A6
{0, C1_7, C2_7, C3_7}, //A7
{0, C1_8, C2_8, C3_8}, //A8
{0, C9_1, C8_1, C7_1}, //A9
{0, C9_2, C8_2, C7_2}, //A10
{0, C9_3, C8_3, C7_3}, //A11
{0, C9_4, C8_4, C7_4}, //A12
{0, C9_5, C8_5, C7_5}, //A13
{0, C9_6, C8_6, C7_6}, //A14
{0, C9_7, C8_7, C6_6}, //A15
{0, C9_8, C7_7, C6_7}, //A16
{0, C1_9, C3_10, C4_10}, //B1
{0, C1_10, C2_10, C4_11}, //B2
{0, C1_11, C2_11, C3_11}, //B3
{0, C1_12, C2_12, C3_12}, //B4
{0, C1_13, C2_13, C3_13}, //B5
{0, C1_14, C2_14, C3_14}, //B6
{0, C1_15, C2_15, C3_15}, //B7
{0, C1_16, C2_16, C3_16}, //B8
{0, C9_9, C8_9, C7_9}, //B9
{0, C9_10, C8_10, C7_10}, //B10
{0, C9_11, C8_11, C7_11}, //B11
{0, C9_12, C8_12, C7_12}, //B12
{0, C9_13, C8_13, C7_13}, //B13
{0, C9_14, C8_14, C7_14}, //B14
{1, C1_1, C3_2, C4_2}, //C1
{1, C1_2, C2_2, C4_3}, //C2
{1, C1_3, C2_3, C3_3}, //C3
{1, C1_4, C2_4, C3_4}, //C4
{1, C1_5, C2_5, C3_5}, //C5
{1, C1_6, C2_6, C3_6}, //C6
{1, C1_7, C2_7, C3_7}, //C7
{1, C1_8, C2_8, C3_8}, //C8
{1, C9_1, C8_1, C7_1}, //C9
{1, C9_2, C8_2, C7_2}, //C10
{1, C9_3, C8_3, C7_3}, //C11
{1, C9_4, C8_4, C7_4}, //C12
{1, C9_5, C8_5, C7_5}, //C13
{1, C9_6, C8_6, C7_6}, //C14
{1, C9_7, C8_7, C6_6}, //C15
{1, C9_8, C7_7, C6_7}, //C16
{1, C1_9, C3_10, C4_10}, //D1
{1, C1_10, C2_10, C4_11}, //D2
{1, C1_11, C2_11, C3_11}, //D3
{1, C1_12, C2_12, C3_12}, //D4
{1, C1_13, C2_13, C3_13}, //D5
{1, C1_14, C2_14, C3_14}, //D6
{1, C1_15, C2_15, C3_15}, //D7
{1, C1_16, C2_16, C3_16}, //D8
{1, C9_9, C8_9, C7_9}, //D9
{1, C9_10, C8_10, C7_10}, //D10
{1, C9_11, C8_11, C7_11}, //D11
{1, C9_12, C8_12, C7_12}, //D12
{1, C9_13, C8_13, C7_13}, //D13
{1, C9_14, C8_14, C7_14}, //D14
{1, C9_15, C8_15, C6_14}, //D15
{1, C9_16, C7_15, C6_15} //D16
};
led_config_t g_led_config = { {
{ 36, 35, 34, 33, 32, 31, 30, 6, 5, 4, 3, 2, 1, 0 },
{ 37, 38, 39, 40, 41, 42, 43, 7, 8, 9, 10, 11, 12, NO_LED },
{ 49, 50, 51, 52, 53, 45, 44, 20, 21, 22, 23, 15, 14, 13 },
{ 48, 47, 46, 54, 55, 56, 57, 19, 18, 17, 16, 24, NO_LED, 25 },
{ 61, 60, 59, 58, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, 29, 28, 27, 26 }
}, {
//A1-A16
{ 224, 0 }, { 204, 0 }, { 187, 0 }, { 170, 0 }, { 153, 0 }, { 136, 0 }, { 119, 0 }, { 119, 16 }, { 136, 16 }, { 153, 16 }, { 170, 16 }, { 187, 16 }, { 204, 16 }, { 224, 8 },
{ 204, 32 }, { 187, 32 },
//B1-B14
{ 170, 48 }, { 153, 48 }, { 136, 48 }, { 119, 48 }, { 119, 32 }, { 136, 32 }, { 153, 32 }, { 170, 32 }, { 187, 48 }, { 214, 48 }, { 224, 64 }, { 204, 64 }, { 187, 64 }, { 170, 64 },
//C1-C16
{ 102, 0 }, { 85, 0 }, { 68, 0 }, { 51, 0 }, { 34, 0 }, { 17, 0 }, { 0, 0 }, { 0, 16 }, { 17, 16 }, { 34, 16 }, { 51, 16 }, { 68, 16 }, { 85, 16 }, { 102, 16 },
{ 102, 32 }, { 85, 32 },
//D1-D16
{ 32, 48 }, { 17, 48 }, { 0, 48 }, { 0, 32 }, { 17, 32 }, { 34, 32 }, { 51, 32 }, { 68, 32 }, { 51, 48 }, { 68, 48 }, { 85, 48 }, { 102, 48 }, { 102, 64 }, { 34, 68 },
{ 17, 68 }, { 0, 68 }
}, {
//A1-A16
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
4, 4,
//B1-B14
4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, 1,
//C1-C16
4, 4, 4, 4, 4, 4, 1, 1, 4, 4, 4, 4, 4, 4,
4, 4,
//D1-D16
4, 4, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
1, 1
} };
#endif
#ifndef DEBOUNCE
# define DEBOUNCE 5
#endif
void bootmagic_lite(void)
{
// The lite version of TMK's bootmagic made by Wilba.
// 100% less potential for accidentally making the
// keyboard do stupid things.
// We need multiple scans because debouncing can't be turned off.
matrix_scan();
wait_ms(DEBOUNCE);
matrix_scan();
// If the Esc and space bar are held down on power up,
// reset the EEPROM valid state and jump to bootloader.
// Assumes Esc is at [0,0] and spacebar is at [4,6].
// This isn't very generalized, but we need something that doesn't
// rely on user's keymaps in firmware or EEPROM.
if ( ( matrix_get_row(0) & (1<<0) ) &&
( matrix_get_row(4) & (1<<6) ) )
{
// Set the TMK/QMK EEPROM state as invalid.
eeconfig_disable();
//eeprom_set_valid(false);
// Jump to bootloader.
bootloader_jump();
}
}
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
bootmagic_lite();
// Please ignore this is for upcoming features
// If the EEPROM has the magic, the data is good.
// OK to load from EEPROM.
/*if (eeprom_is_valid())
{
backlight_config_load();
// TODO: do something to "turn on" keymaps in EEPROM?
}
else
{
// If the EEPROM has not been saved before, or is out of date,
// save the default values to the EEPROM. Default values
// come from construction of the zeal_backlight_config instance.
backlight_config_save();
// Clear the LED colors stored in EEPROM
for ( int row=0; row < MATRIX_ROWS; row++ )
{
HSV hsv;
for ( int column=0; column < MATRIX_COLS; column++ )
{
hsv.h = rand() & 0xFF;
hsv.s = rand() & 0x7F;
hsv.v = 255;
backlight_set_key_color( row, column, hsv );
}
}
#ifdef USE_KEYMAPS_IN_EEPROM
keymap_default_save();
#endif
// Save the magic number last, in case saving was interrupted
eeprom_set_valid(true);
}*/
matrix_init_user();
}
void suspend_power_down_kb(void)
{
rgb_matrix_set_suspend_state(true);
}
void suspend_wakeup_init_kb(void)
{
rgb_matrix_set_suspend_state(false);
}