History

Joel Challis 17c3182b1c Remove use of broken split.main (#22363 )		2023-10-30 00:49:56 +00:00
..
keymaps	Update more `DRIVER_LED_TOTAL` defines to `RGB_MATRIX_LED_COUNT` (#19089 )	2022-11-16 05:59:09 +11:00
config.h	Migrate recently introduced sync items (#22305 )	2023-10-21 12:21:23 +01:00
halconf.h	Fixup ChibiOS header inclusion search ordering. (#19623 )	2023-01-19 01:05:29 +00:00
info.json	Remove use of broken split.main (#22363 )	2023-10-30 00:49:56 +00:00
mcuconf.h	Fixup ChibiOS header inclusion search ordering. (#19623 )	2023-01-19 01:05:29 +00:00
mini42.c	Fixup controllerworks/mini42 (#18553 )	2022-09-30 22:26:40 +01:00
readme.md	[Keyboard] Add mini42 (#18491 )	2022-09-30 06:48:41 +01:00
rules.mk	OLED: driver naming cleanups (#21710 )	2023-08-15 10:30:34 +01:00

mini42

A pre-built, low profile, split mechanical keyboard based on the RP2040 processor

Keyboard Maintainer: Kevin Gee
Hardware Supported: mini42 split ergonomic keyboard
Hardware Availability: https://controller.works/products/mini42-low-profile-ergonomic-keyboard Hardware is available as pre-built units only.

Make example for this keyboard (after setting up your build environment):

    make controllerworks/mini42:default

Flashing example for this keyboard:

    make controllerworks/mini42:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Features

Highly integrated design with microcontroller, USB and TRRS connectors, and OLED all integrated on the main board with no secondary modules
RP2040 processor by Raspberry Pi Foundation running at 130 MHz with 16MB flash memory
CNC milled aluminum case with only 8mm thickness
"PCB art" shine through back plate with gold surface finish
128x32 OLED on each keyboard half
42 per-key RGB LEDs and 12 backlight RGB LEDS are individually addressable
ESD and over-current protection on USB and TRRS connectors
Reset and boot tactile switches
USB C host connection
Hot swap connectors for Kailh Chocolate PG1350 switches
Chocolate key spacing (18mm horizontal x 17mm vertical)

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the upper left key on the left hand keyboard half or the upper right key on the right hand keyboard half while plugging in USB
Physical reset button: Press the RST button twice, rapidly
Keycode in layout: Press the key mapped to QK_BOOT if it is available

Name	Pin	Left Row	Left Column	Right Row	**Right Column
LED	GP0
DATA	GP1
DATA2*	GP28
KEY0	GP2	0	0	4	0
KEY1	GP3	0	1	4	1
KEY2	GP4	0	2	4	2
KEY3	GP5	0	3	4	3
KEY4	GP6	0	4	4	4
KEY5	GP7	0	5	4	5
KEY6	GP8	1	0	5	0
KEY7	GP9	1	1	5	1
KEY8	GP10	1	2	5	2
KEY9	GP11	1	3	5	3
KEY10	GP12	1	4	5	4
KEY11	GP13	1	5	5	5
KEY12	GP14	2	0	6	0
KEY13	GP15	2	1	6	1
KEY14	GP16	2	2	6	2
KEY15	GP17	2	3	6	3
KEY16	GP18	2	4	6	4
KEY17	GP19	2	5	6	5
KEY18	GP20	3	0	7	0
KEY19	GP21	3	1	7	1
KEY20	GP22	3	2	7	2
SDA	GP24
SCL	GP25

*DATA2 on production units, not connected on prototype units

** Right Column numbers run right (pinky position) to left (thumb position)