* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
* model01: implement RGB matrix feature
LEDs can still be individually controlled if this is switched off.
* model01: use fast banked LED setting commands
* model01: update default keymap to use RGB matrix
* model01: update RGB matrix support to match common_features.mk
* rgb_matrix: include <string.h>
This was missing after commit 4d5705ea6c
which introduces a use of memset().
* model01: make g_rgb_leds weak
This allows users to override which LEDs are configured as
modifiers, or tweak the x/y coordinates, should they so choose.
* Keyboard: add Keyboardio Model01
This port implements key scanning and everything in their default
keymap.
It doesn't implement mouse warping; QMK can't do that (yet).
LED control is mostly not implemented. The ability to set all LEDs is
included because they can get stuck on coming from the bootloader
otherwise. Single LED control is also implemented for numpad indication.
The scanners also support batch LED transfer which is what you'd need if
you wanted to do fast effects. Gamma correction is also not implemented,
but is present in the original firmware. The necessary info for further
implementation is in the KeyboardioScanner module for Kaleidoscope.
To install on your keyboard:
make model01:avrdude
When prompted, hold the "prog" key on the keyboard to put it into
programming mode. This can also be achieved by holding the "prog" key
while plugging in the keyboard. This works even if the firmware is
corrupt or missing.
Hot plugging the halves seems to work fine, but there is no explicit
support for eg. making sure the matrix scan rate is reconfigured.
* model01: clean up includes and include guards
Uses #pragma once everywhere.
* model01: split LED and matrix code
This makes space if someone wants to implement better LED support
later on, the keyboard is a lot more capable than the current code.
* model01: separate I2C timeouts for matrix vs. LED
If the scanners have no data they don't ACK reads and just time out.
So we want a pretty short timeout to keep scan rates high.
Meanwhile the LED transfers might take longer - I don't know though,
so here we are conservative.
* model01: implement better LED control
- gamma correction from the manufacturer's firmware
- suitable delays to allow back to back LED writes
- this is fast enough to write the whole keyboard without noticeable
delay, in my experience
- minor bug fix: RHS Fn key was not addressable
* model01: add license to wire-protocol-constants.h
* model01: replace gamma LUT
The original was of unclear license origin. This one is functionally
identical and includes a generator should people wish to adjust it.
* model01: use the already-present CIE1931 lightness curve
...rather than baking in another gamma curve.
It's said that CIE1931 is the right thing to be using rather than gamma.
OK. Let it be so.
* model01: call matrix_init_user() from matrix_init_kb()
* model01: remove inapplicable config options from rules.mk
* model01: readme.md: update build environment links
