Commit graph

56 commits

Author SHA1 Message Date
James Young 1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Joel Challis 790f94533c
Refactor to use led config - Part 6 (#12115)
* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* revert changes
2021-03-10 22:48:18 +00:00
Drashna Jaelre 7161d65070
Remove FAUXCLICKY feature (deprecated) (#11829) 2021-02-09 09:49:05 -08:00
fauxpark be897cbc2f Merge remote-tracking branch 'upstream/master' into develop 2021-01-27 17:39:20 +11:00
Ryan 6937f1d70e
Remove MIDI_ENABLE_STRICT from keyboards' config.h (#11679) 2021-01-27 17:26:26 +11:00
QMK Bot 82a875056c Merge remote-tracking branch 'origin/master' into develop 2021-01-18 01:50:00 +00:00
Ryan cc3f2e2865
Remove DESCRIPTION, E-G (#11574) 2021-01-18 12:49:25 +11:00
Zach White 2a67ff690e clean up generate-api errors 2021-01-07 21:21:12 -08:00
James Young c66df16644
2020 November 28 Breaking Changes Update (#11053)
* Branch point for 2020 November 28 Breaking Change                                                

* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)                                           

* Add support for soft serial to ATmega32U2 (#10204)                                               

* Change MIDI velocity implementation to allow direct control of velocity value (#9940)            

* Add ability to build a subset of all keyboards based on platform.                                

* Actually use eeprom_driver_init().                                                               

* Make bootloader_jump weak for ChibiOS. (#10417)                                                  

* Joystick 16-bit support (#10439)                                                                 

* Per-encoder resolutions (#10259)                                                                 

* Share button state from mousekey to pointing_device (#10179)                                     

* Add hotfix for chibios keyboards not wake (#10088)                                               

* Add advanced/efficient RGB Matrix Indicators (#8564)                                             

* Naming change.                                                                                   

* Support for STM32 GPIOF,G,H,I,J,K (#10206)                                                       

* Add milc as a dependency and remove the installed milc (#10563)                                  

* ChibiOS upgrade: early init conversions (#10214)                                                 

* ChibiOS upgrade: configuration file migrator (#9952)                                             

* Haptic and solenoid cleanup (#9700)                                                              

* XD75 cleanup (#10524)                                                                            

* OLED display update interval support (#10388)                                                    

* Add definition based on currently-selected serial driver. (#10716)                               

* New feature: Retro Tapping per key (#10622)                                                      

* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)             

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)

* Rescale both ChibiOS and AVR backlighting.                                                       

* Reduce Helix keyboard build variation (#8669)                                                    

* Minor change to behavior allowing display updates to continue between task ticks (#10750)        

* Some GPIO manipulations in matrix.c change to atomic. (#10491)                                   

* qmk cformat (#10767)                                                                             

* [Keyboard] Update the Speedo firmware for v3.0 (#10657)                                          

* Maartenwut/Maarten namechange to evyd13/Evy (#10274)                                             

* [quantum] combine repeated lines of code (#10837)                                                

* Add step sequencer feature (#9703)                                                               

* aeboards/ext65 refactor (#10820)                                                                 

* Refactor xelus/dawn60 for Rev2 later (#10584)                                                    

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)                                 

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)                                    

* update chibios os usb for the otg driver (#8893)                                                 

* Remove HD44780 References, Part 4 (#10735)                                                       

* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)                                                

* Fix cursor position bug in oled_write_raw functions (#10800)                                     

* Fixup version.h writing when using SKIP_VERSION=yes (#10972)                                     

* Allow for certain code in the codebase assuming length of string. (#10974)                       

* Add AT90USB support for serial.c (#10706)                                                        

* Auto shift: support repeats and early registration (#9826)                                       

* Rename ledmatrix.h to match .c file (#7949)                                                      

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)                                        

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)                                        

* Merge point for 2020 Nov 28 Breaking Change
2020-11-28 12:02:18 -08:00
MechMerlin 0f8b0d971f
VIA Support: E6V2 BMC editions (#10969)
* update readme with relevant PCB versioning

* Add VIA keymap to e6v2 LE BMC

* add via keymap

* Update keyboards/exclusive/e6v2/le_bmc/keymaps/via/keymap.c

Co-authored-by: Joel Challis <git@zvecr.com>

* Update keyboards/exclusive/e6v2/oe_bmc/keymaps/via/keymap.c

Co-authored-by: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
2020-11-18 20:16:18 +00:00
Joel Challis f00402a2f3
Refactor to use led config - Part 3 (#10966)
* Refactor to use led config

* Refactor to use led config

* Refactor to use led config

* Refactor to use led config
2020-11-18 17:51:53 +00:00
kaylanm 5f2c434954
E85 backlight & LED indicator updates (#10678)
* Enable in-switch backlight on e85 for VIA keymaps.

Update LED indicator code for e85 hotswap/soldered PCBs.
2020-11-05 20:58:00 -08:00
bintobean b9ed9d33d3
[Keyboard] Add via keymap to E6.5 (#10771)
* Added basic via keymap

* Added via keymaps and changed config Product and Vendor ID

* Update keyboards/exclusive/e65/keymaps/via/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/exclusive/e65/config.h

Co-authored-by: Ryan <fauxpark@gmail.com>

* Refactored via/keymap.c to use LAYOUT_all

* Refactored e65.h to remove nested matrix layouts

* Previous commit missed LAYOUT_65_ansi_blocker. Fixed

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-10-29 00:00:38 -07:00
MechMerlin 59d503e3b9
[keyboard] Add Caps Lock LED Logic to exclusive/e85/soldered (#10639)
* on behalf of VashtaNerada commiting his code to get caps lock led working on the soldered E8d E8.5

* Update keyboards/exclusive/e85/soldered/soldered.c

Co-authored-by: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
2020-10-15 01:37:11 +01:00
MechMerlin f145696dad
E85 Hotswap/Soldered Fixes (#10173)
* split up the e85 into hotswap and soldered variants

* remove layout_all LAYOUT macro for hotswap pcb

* add copyright header to  to all config files

* remove list of alternate bootloaders

* spruce up config file

* comply with PR check list

* Update keyboards/exclusive/e85/hotswap/info.json

* Update keyboards/exclusive/e85/hotswap/info.json

* Update keyboards/exclusive/e85/hotswap/info.json

* Update keyboards/exclusive/e85/rules.mk

* Update keyboards/exclusive/e85/config.h

* Update keyboards/exclusive/e85/hotswap/config.h

* Update keyboards/exclusive/e85/soldered/config.h

* remove LAYOUT_all in hotswap and also remove superfluous comments

* remove the soldered tsangan map
2020-09-01 14:45:25 -07:00
James Young 4e8af9d41b
Remove HD44780 References, Part 2 (#9918)
* remove HD44780_ENABLE rules: C-F

* remove HD44780_ENABLE config: C-F
2020-08-07 02:06:14 -07:00
MechMerlin de79d55187
New Keyboard: E8.5 TKL (#9447)
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-06-20 21:47:50 +01:00
Ryan ce842f912e
Remove DEBUG_LEVEL from V-USB rules.mk (#9117) 2020-05-17 21:37:04 +01:00
MechMerlin 7f6ba2bf8a
[Keymap] VIA Support: Exclusive E7-V1 (#9038)
* add a VIA Keymap

* update VID and PID

* update readme

* Update keyboards/exclusive/e7v1/readme.md
2020-05-16 09:16:51 -07:00
James Young 7abbc95cd6
Fix incorrect key sizes in Configurator (#9073)
* fix key size: exclusive/e6v2/le_bmc

* fix key size: exclusive/e6v2/oe_bmc

* fix key sizes: flx/lodestone

* fix key size: handwired/prime_exl

* fix key sizes: massdrop/ctrl
2020-05-13 20:00:37 +01:00
Konstantin Đorđević 2d39a9dcdb
Remove no-longer-necessary LTO checks from keyboards' config.h files (#8773)
* Remove no-longer-necessary LTO checks from keyboards' config.h files

* Remove unnecessary LTO check in @danielo515's Ergodox EZ keymap

* Remove unnecessary USE_Link_Time_Optimization checks from keyboards' config.h files

Note: DISABLE_LEADER doesn't seem to be used anywhere
2020-04-19 23:56:48 +01:00
Ryan 51a81813b0
V-USB: Consolidate usbconfig.h's into a single file (#8584) 2020-03-31 13:17:04 +01:00
Ryan 14079ce698
V-USB: Use structs for USB descriptors (#8572)
* V-USB: Use structs for USB descriptors

* Update usbconfigs

* cformat pass
2020-03-28 13:02:25 +11:00
Ryan 4d76d85d7b
V-USB: Use manufacturer and product strings from config.h (#7797)
* V-USB: Use manufacturer and product strings from config.h

* Update board configs
2020-03-26 13:11:32 +00:00
ridingqwerty 66fe3001e4
Trim firmware sizes from default rules.mk, part 1 (#8027)
* Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files

* Correct some 'rules.mk' in boards buried under vendor folders

* PR8027 patch

Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-01-29 12:51:25 -05:00
fauxpark b568999769 Fix LED configuration for PS2AVRGB boards (#7989)
* Fix LED configuration for PS2AVRGB boards

* Undo backlight on state changes
2020-01-23 19:24:10 -08:00
fauxpark f5209aa4e9 Remove custom backlight code for PS2AVRGB boards (#7775)
* Remove custom backlight code for PS2AVRGB boards

* Remove custom driver setting

* BACKLIGHT_BREATHING goes in config.h, not here

* Don't need to include backlight.c again here either

* Turn on backlight for Canoe

* Disable console on a few boards due to oversize
2020-01-18 23:00:32 -08:00
yulei fe860131dd [Keyboard] fixed hhkb keymap issue on e6_rgb (#7684)
* fixed hhkb keymap issue and added allleds configuration

* fixed layout mismatch

* add more matrix control

* remove redundent define in rules.mk

* turn NKRO on

* remove allled macro, adding readme in allleds mode, add via support

* add two more layers for via

* update readme file

* Update keyboards/exclusive/e6_rgb/keymaps/allleds/readme

* Update keyboards/exclusive/e6_rgb/keymaps/allleds/readme.md
2020-01-08 00:11:45 -08:00
fauxpark 2557bc8e6f
Remove custom matrix from PS2AVRGB boards (#7396)
* Remove custom matrix from PS2AVRGB boards

* Add custom backlight.c to SRC for bminiex, for now

* Add missing DIODE_DIRECTIONs
2020-01-02 17:45:41 +11:00
Sid Carter e4818cf732 [Keymap] Personal keymap for the E6.5 (#7623)
* add new layout mirroring all my other layouts

* add rgb and other keys on fnm layer
2019-12-13 01:32:06 -08:00
Bart Riemens ab78386e02 [Keyboard] Add Exclusive E7-V1 SE keyboard and keymaps (#7598)
* Updated based on feeback in PR #7598
2019-12-13 14:18:53 +11:00
Joel Challis 6a8c0a6468 [Keyboard] Update ATmega32A readme files to match template (#7462)
* Update atmega32a readme files to match template

* Update atmega32a readme files to match template - fixes

* Apply suggestions from code review
2019-11-23 20:42:20 -08:00
trinity1561 0a5125a535 [Keyboard] Update e65.c to fix Caps Lock indicator (#7405)
* Update e65.c

Fixing Caps Lock LED indicator

* Update e65.c

Using new LED functions (led_update_kb)
2019-11-20 13:10:59 -08:00
fauxpark 519df78cdb
Set device version from config.h for V-USB boards (#7316) 2019-11-15 10:21:53 +11:00
fauxpark 3047335729
Add support for configurable polling interval and power usage o… (#7336)
* Add support for custom polling interval and power usage on V-USB boards

* Use 1ms as default for now
2019-11-15 10:21:22 +11:00
fauxpark efa28d0f5c Convert some PS2AVRGB boards to I2C WS2812 driver (#7241)
* Convert some PS2AVRGB boards to I2C WS2812 driver

* Fix Travis failure for bface
2019-11-04 16:05:03 -08:00
fauxpark e8b65d0170 Cleanup rules.mk for 32U4 keyboards, A-F (#6804)
* Cleanup rules.mk for 32U4 keyboards, A-F

* Put back stuff in VIA keymaps
2019-10-05 11:09:35 -07:00
MechMerlin 0850a8cb63 65 ansi blocker everywhere (everywhere I can find) (#6805)
* e6.5 actually already had a 65_ansi_blocker LAYOUT macro, so just had to enable in rules.

* Add the 65_ansi_blocker LAYOUT macro and enable in rules.mk

* rename LAYOUT macro in .h and in the keymap.c as it was only a default keymap. Also enable in rules.mk

* rename but also had to define the existing LAYOUT macro as the new one to prevent breakage of existing keymaps

* add 65_ansi_blocker support for vinta

* forgot to update the info.json on these

* add new default layout 65_ansi_blocker support to alt

* add 65_ansi_blocker support

* undo changes
2019-09-25 12:55:27 -07:00
fauxpark de4a47f1cc Cleanup rules.mk for 32A and 328P keyboards (#6767) 2019-09-20 22:06:32 -07:00
Jason Thigpen 2493eecc7b [Keymap] Fix e65 7u WK layout and add crd's personal keymap (#6750)
* Add e65 keymap for crd

* Fix e65 7u wk layout
2019-09-17 10:27:07 -07:00
Brice Figureau a88b6db682 [Keyboard] Add the E6.5 keyboard (#6693)
The E6.5 is the new 65% keyboard made by Exclusive.
This changeset adds its PCB to QMK, including all the bottom row
variants and iso/ansi/split BS layouts.
2019-09-09 21:42:21 -07:00
fauxpark ba42a5ae68 Remove commented out MCUs in rules.mk (#5884) 2019-07-16 00:26:38 -07:00
Drashna Jaelre faaaa134fd Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997) 2019-06-06 12:09:56 -07:00
MechMerlin 786ee9c7be [Keyboard] E6V2 R2 BMC PCB (#6009)
* initial commit

* remove mentions of oe and replace with le

* add new layout macros with the spacebar change

* add rgb underglow support

* Update keyboards/exclusive/e6v2/le_bmc/rules.mk

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/exclusive/e6v2/le_bmc/readme.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
2019-05-29 11:16:13 -07:00
MechMerlin 2ce3c5548a [Keyboard] E6V2 BMC OE (#5908)
* rename bmc due to confusion as the bmc from r2 is different

* update readme

* Update keyboards/exclusive/e6v2/readme.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
2019-05-19 09:51:56 -07:00
XScorpion2 af89752bff rgb_led struct conversion (aka: Per led (key) type rgb matrix effects - part 2) (#5783)
* Initial conversion of the rgb_led struct

* Converting last keyboard & updating effects to take advantage of the new structure

* New struct should not be const

* Updated docs

* Changing define ___ for no led to NO_LED

* Missed converting some keymap usages of the old struct layout
2019-05-07 16:22:46 -07:00
XScorpion2 a7113c8ed0 Updated rgb_led struct field modifier to flags (#5619)
Updated effects to test led flags
Updated massdrop to use new flags field for led toggle
2019-04-29 15:18:50 -07:00
MechMerlin 703699b81f [Keyboard] forgot to omit k05 from the electrical matrix in hhkb layout (#5684) 2019-04-23 19:11:18 -07:00
mechmerlin 1b9f82c844 disable bootmagic as it does not work for bmc boards 2019-04-06 19:24:41 -07:00
mechmerlin 0baa1e2b2f fix naming in usbconfig.h 2019-04-06 18:33:32 -07:00