Commit graph

37 commits

Author SHA1 Message Date
Ryan 5af1799735
Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2021-09-12 15:27:29 +10:00
Ryan 4791cfae1a
Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
Ryan d5cb7de5e4
Change USBasp and bootloadHID bootloaders to lowercase (#14354) 2021-09-10 17:17:54 +10:00
Ryan 7eea780a7d
Remove bootloader listings from rules.mk (#14330) 2021-09-10 13:35:46 +10:00
James Young a03aa301de
Remove Full Bootmagic (#13846)
* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta
2021-08-06 23:59:56 -07:00
James Young a8d64c8b89
Change BOOTMAGIC_ENABLE=yes to use Bootmagic Lite (#12172) 2021-04-12 21:18:52 +02:00
xyzz 0779c34db8
Fix keycode mappings for via and ensure they don't change within protocol (#12130)
* Fix keycode mappings for via and ensure they don't change within protocol

* Update keycodes

* Fix broken keyboards

* added the missing keycodes found in via

* Remove invalid keycodes

Co-authored-by: David Hoelscher <infinityis@users.noreply.github.com>
2021-03-15 12:19:01 +11:00
Joel Challis 790f94533c
Refactor to use led config - Part 6 (#12115)
* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* revert changes
2021-03-10 22:48:18 +00:00
Joshua Diamond 5660d80bb0
[Keyboard] reduce confusion for kbdfans/kbd75 rounds/revisions (#11972) 2021-02-21 19:41:31 -08:00
Konstantin Shpits bf3ee94b9a
[Keyboard] Add VIA support for YMD 75 (#11811)
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-02-16 15:13:30 -08:00
Nathan13888 4eebefada7
[Keyboard] YMD75 rev 3: fix BACKLIGHT_PIN (#11172)
* YMD75 rev 3:  fix BACKLIGHT_PIN

Update backlight LED pin used by QMK to control the per-key backlight for YMD75 rev 3

* YMD75 rev 3: fix BACKLIGHT_PIN - fix comments

* YMD75: move BACKLIGHT_PIN definitions to the respective versions

Signed-off-by: Nathan13888 <29968201+Nathan13888@users.noreply.github.com>
2020-12-22 11:27:27 -08:00
Zach White c0dcee96a8
Initial list of keyboards to exclude from CI (#11213) 2020-12-21 15:38:39 +01:00
Ryan b9ea10a80d
YMD75 rev3: fix swapped backslash and enter (#10801) 2020-10-30 01:32:24 -07:00
Erovia ad86894ae7
Rename keyboard-level readmes to lower-case (#10759)
This is the recommendation in the [PR
Checklist](https://docs.qmk.fm/#/pr_checklist?id=keyboard-prs) and it
will make working with them easier in the CLI/API/etc.
2020-10-25 15:23:42 +00:00
Jakob 27f9f3196d
[Keyboard] add support for ymd75 rev3 (#10483)
* add support for ymd75 rev3

* Update keyboards/ymd75/rev3/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/ymd75/rev3/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* remove DESCRIPTION

* only apply offset for rev3

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-10-04 15:19:34 -07:00
Lasse Bjerre 0050033aca
Add ISO layouts for YMD75 (#10244)
* Update rev2.h

* Update info.json

* Create keymap.c

* Add ISO layout to rev1

* Removed redundant keycount

* Add fix for rev1 board + additional key

* Updated default iso keymap

* Add layout with 1.5u keys to the right of spacebar

* Fixed rev2 rwkl and added default layout
2020-09-14 18:41:30 -07:00
James Young d88dca3ca7
YMD75: move MCU/Bootloader rules to revision level (#9452)
Work-around for an issue with QMK Configurator's API.
2020-06-18 00:15:22 -07:00
Jared Hendry 1522d97c2b
Add support for YMD75 rev 2 (#8853) 2020-04-20 00:58:58 +01:00
Ryan 51a81813b0
V-USB: Consolidate usbconfig.h's into a single file (#8584) 2020-03-31 13:17:04 +01:00
Ryan 14079ce698
V-USB: Use structs for USB descriptors (#8572)
* V-USB: Use structs for USB descriptors

* Update usbconfigs

* cformat pass
2020-03-28 13:02:25 +11:00
Ryan 4d76d85d7b
V-USB: Use manufacturer and product strings from config.h (#7797)
* V-USB: Use manufacturer and product strings from config.h

* Update board configs
2020-03-26 13:11:32 +00:00
Ryan 5e3951b361
Remove NO_UART defines from config.h for V-USB boards (#8351) 2020-03-09 19:58:25 +00:00
fauxpark b568999769 Fix LED configuration for PS2AVRGB boards (#7989)
* Fix LED configuration for PS2AVRGB boards

* Undo backlight on state changes
2020-01-23 19:24:10 -08:00
fauxpark f5209aa4e9 Remove custom backlight code for PS2AVRGB boards (#7775)
* Remove custom backlight code for PS2AVRGB boards

* Remove custom driver setting

* BACKLIGHT_BREATHING goes in config.h, not here

* Don't need to include backlight.c again here either

* Turn on backlight for Canoe

* Disable console on a few boards due to oversize
2020-01-18 23:00:32 -08:00
fauxpark 2557bc8e6f
Remove custom matrix from PS2AVRGB boards (#7396)
* Remove custom matrix from PS2AVRGB boards

* Add custom backlight.c to SRC for bminiex, for now

* Add missing DIODE_DIRECTIONs
2020-01-02 17:45:41 +11:00
Joel Challis 6a8c0a6468 [Keyboard] Update ATmega32A readme files to match template (#7462)
* Update atmega32a readme files to match template

* Update atmega32a readme files to match template - fixes

* Apply suggestions from code review
2019-11-23 20:42:20 -08:00
fauxpark 519df78cdb
Set device version from config.h for V-USB boards (#7316) 2019-11-15 10:21:53 +11:00
fauxpark 3047335729
Add support for configurable polling interval and power usage o… (#7336)
* Add support for custom polling interval and power usage on V-USB boards

* Use 1ms as default for now
2019-11-15 10:21:22 +11:00
fauxpark 3a215195ed Convert remaining PS2AVRGB boards to I2C WS2812 driver (#7245)
* Convert remaining PS2AVRGB boards to I2C WS2812 driver

* Add back functions to make the custom matrices happy
2019-11-03 14:43:13 -08:00
fauxpark de4a47f1cc Cleanup rules.mk for 32A and 328P keyboards (#6767) 2019-09-20 22:06:32 -07:00
fauxpark 72f382fc02 Remove unused _BOOTLOADER defines 2019-08-04 20:46:57 -07:00
zvecr 205ffc277c Align use of atmega32a program script (#5259)
* Remove duplicate 'program' files and refactor to use atmega32a_program.py

* Update readme references from 'program' to 'atmega32a_program.py'
2019-03-14 15:55:08 -07:00
Drashna Jaelre b05c0e46c6 Adds a default value for IS_COMMAND for COMMAND feature (#4301)
* Add default value for IS_COMMAND for COMMAND feature

* Cleanup and consistency

* Update Templates to reflect change

* Fix IS_COMMAND in template

* Fix IS_COMMAND define

* Use consistent IS_COMMAND block in templates

* Remove unnecessary `#undef IS_COMMAND` directives

* Fix compile issue on orthodox

* Reomve IS_COMMAND option for newer boards

* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting

* Remove a couple of additional IS_COMMAND defines

* Remove remaining redundant IS_COMMAND definitions

* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin

* Remove multiple empty lines in modified config.h files

* Update additional boards

* Reomve IS_COMMAND from newer boards

* Update Alice keyboard

* Remove IS_COMMAND from additional boards

Jan 24th edition
2019-01-26 15:49:45 -08:00
Jeremy Bernhardt c8cbee5d71 Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
noroadsleft 7f4f0f7685 Remove deprecated QUANTUM_DIR code blocks from makefiles (#4754)
* Remove QUANTUM_DIR code blocks from keyboard rules

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect entire keyboards.

* remove QUANTUM_DIR code blocks from rules for default keymaps

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect default keymaps.

* remove QUANTUM_DIR code blocks from rules for user keymaps

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect "user" keymaps. (It's actually any keymap
that isn't named `default`.)

* remove QUANTUM_DIR code blocks from rules for community layouts

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for community layouts.

* remove QUANTUM_DIR code blocks from rules for userspaces

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for userspaces.
2019-01-04 07:25:48 -08:00
Kenneth Aloysius f2bc70a264 ps2avrgb: fix incorrect avr ports specified (for numlock and capslock LEDs) (#3453)
* Add M6-A keymap

* Update XD60 keymap

* Update XD60 keymap readme

* Update JJ40 and Let's Split keymaps

* Add readme for M6-A

* Fix typo, update JJ40 README

* Update jj40 readme

* Cleanup jj40 keymap

* Revert Let's Split QWERTY layer to default before #2010

* Update numpad layers

* Fix: Let's Split keymap getting stuck mods due to having keycodes assigned on the Raise layer

* Keep ASCII art consistent with keymap

* Staryu: initial port

* Add personal keymap

* Added and updated READMEs

* Fix: default keymap for staryu

* Rudimentary backlight support.

* Enabled mousekeys for default keymap

* use QMK_KEYBOARD_H and LAYOUT

* Update readme.md for NIU mini: flash using avrdude

* Fix missing linebreaks for Staryu README

* Update readme.md

* Update PS2AVRGB boards with new matrix.c

* Update canoe matrix.c; untested

* Fix canoe.c for building (needs matrix_scan_user and matrix_init_user)

* Add personal Iris keymap

* Update keymap

* Update keymap

* Update keymap, disable backlighting and underglow

* Move PrintScreen button

* Add README

* Update personal keymaps

* Add INS key

* Limit USB max power consumption, change Fn to MENU

* Remove Numpad layer (easy to accidentally toggle)

* Fix backlighting for ps2avrgb

* Update comments to refer to actual pin naming

* Possible fix for xyverz ortho keymap: define RGBLED_NUM

* Make led_set_user in backlight.c overridable

* Add changes to address points raised in code review, untested (don't have build env right now)
2018-07-23 12:11:56 -07:00
WarmCat 2b06623fa0 Added YMD75 support (#2968)
* Adding ymd75 files

* Added YMD75 support, inc layout json

* Added YMD75 support
2018-05-14 09:43:12 -07:00