* slight modifier changes; added plover and reusing jack's default planck keymap as the basis
* space is not shift when held anymore
* added fabian layout (based on jack's default)
* changed fabian layout (based on jack's default)
* changed fabian layout (based on jack's default)
* Fix mbsurfer let's split layout RGB indicators when both lower and raise are pressed
* Update mbsurfer let's split keymap with new RGB key codes for modes
* Clean up mbsurfer keymap matrix layout
* initial clueboard_60 support
* LED lighting support
* fix the clueboard->clueboard_66 rename
* Add layout support to clueboard_60
* Fix the 60_iso layout so it's actually iso
* add a default keymap for AEK layout
* fix clueboard_17
* Fixup the ISO layouts
* Fix the `wait_ms()/wait_us()` definitions for chibios
* Fix up the wait_ms/wait_us hack. Reduce stack size.
* Add a missing #include "wait.h"
* commit files that should have already been comitted
* Support for KBP V60 Type R 60% keyboard
Support does not include in switch or underglow lighting for Polestar Edition.
* rename v60type_r to v60_type_r
* Remove old v60type_r
* Modify readme.md to adhere with QMK readme formatting.
tearing it down so that it can be rebuilt
fiddling with audio
big default config overhaul
apparently startup sounds work without the override now
readme!
readme fixes
readme tweaking
* Add yuuki keymap
Documentation is still a TODO and the keymap may not be final
* GRV on colon
* add KC_GRV to FN ESC
* hhkb ish
* hhkbish 2
* HHKBish and documentation
* Fix Markdown warnings
* typo
* phreed keymap added
This keymap moves many pinky keys to the center
* set to do what I want but LT() does not return to previous layer
* get overlays working
* get overlays working
* fix the readme
* fix the readme
* swapped the shift
* swapped the shift
* propagate mods
* clear special char on readme
* Implement sticky modifiers
* Change underglow based on sticky mod status
* Set RGB lights based on which mods are stickied
* Add controls for dimming RGB LEDs
* Only update RGB lights if modifiers have changed
* Use all LEDs to show modifier state
* Create default keymap for Viterbi
* Duplicate default layout as basis of my own
* Basic Colemak layer, just to practice flashing
* Add reset button so that we don't have to short out the reset button on the board to flash it.
* Symbols layer
* Navigation layer, and remove unused keys. Now usable, nice.
* Correct backspace for UK QWERTY mapping
* Small clarification in XD75RE readme instructions
* Use UK pipe so that I can type a pipe on a UK keyboard
* adding new layout for the planck that helps when coming from the pok3r
* Fixing the function layer
* Update readme.md
* Update keymap.c
Making some small adjustments
* Update keymap.c
switching GUI and Esc
* Update keymap.c
* changed 'infinity' to 'ergodox_infinity' and specified to be in the top-level directory as per recent changes to directory structure of QMK_firmware git repo
* accidently removed '-' in last line of readme
* add new RGB keycodes and clean up lets split keymap
* extraneous cases
* More cleanup and added macro
* one more macro
* cleaned up my planck keymap and added macros
* Transitioned planck keymap to new formatting / audio modes based on new default
* Remove extraneous newline in song list, add keycodes missed in previous commit
* error in graphical representation of keycodes
* Merge with upstream
* Finish merge
* Add new keymap
* Change use of KEYMAP macro
* Add Readme.md
* Fix link
* Clean up comments
* Raise on leading edge of keypress
* Add HOME/END keys as upper/lower on arrow-up/down
* Reduce .hex file size by turning off unneeded options
* Put digit keypad onto left hand upon RAISE; this will sometimes be preferable to double-hits of right hand
* Latest super latest version merge
* cbbrowne keymap for XD75re
* starting notes on XD75re keymap plans
* First draft of bottom row of QWERTY
* Switch my special bottom line over to QCENT
* Dunno
* Filling in wanted keys, bit by bit...
* Add copyright, extra macro
* Clean up comments, remove some experimental code I didn't like
* TODO plans for xd75re
* clean up keyboard layout
* QCENT2 is my new experiment for the main keyboard...
* Add a few more main layer keys, and modify LOWER to shift things outwards to conform with main layer
* Clean up RAISE layer to conform with main layer, remove QCENT layer as QCENT2 is the new thing
* More xd75 changes, now that I actually have it in hand
* shift keymap around, as original attempt was a bit too aggressive in keeping to the edges
* more revs to XD75
* Dropping parts of the centre keypad in favor of Keys I Really Need
* Improve documentation to conform with how builds are done now
* Improve documentation to conform with how builds are done now
* Add cbbrowne rules file as alternative to having the rules in Makefile
* Makefile not needed anymore for individual keymap
* Remove all Makefiles from the keyboards directory.
* update keymaps added in the last 8 days
* Ignore keyboard/keymap makefiles
* update hand_wire to reflect our new Makefile-less reality
* Update the make guide to reflect the new reality
* move planck keymap options to rules.mk
* update planck keymaps 4real
* trigger travis
* add back build_keyboard.mk
* restore changes to build_keyboard
* Allow the knight animation to be restricted to a portion of the LED strip
* Add keys for jumping directly to particular animation modes
* Remove orphaned break statements
* Tweak the `RGB_MODE` buttons so they cycle through the same mode.
* small indentation fix
* Add a new revision of the clueboard with 18 underlight LEDs
* Allow the knight animation to be restricted to a portion of the LED strip
* Add keys for jumping directly to particular animation modes
* Remove orphaned break statements
* Tweak the `RGB_MODE` buttons so they cycle through the same mode.
* small indentation fix
* copied mjt keymaps from archive
* All mjt boards now compile
* fixed jd45-mjt breathing
* Updates to fix SpaceFN but not tested yet.
* Still missing either spacebar or an adjacent keypress.
* Debugging rigged up for use with hid_listen.
* Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c
* Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function.
* Cleaned up JD45 keymap that uses tapkey.
* Redid minivan keymap with numsym rather than raise/lower.
Untested.
* Created my MJT keymap for HHKB
Enabled dynamic macros and moved
somoe of the shortcuts around.
* Minor keymap fixes to make them compile without errors.
* Added home/end to right arrow cluster on DYN layer.
* Added more keys to fn and dyn layers.
* It wasn't using my custom layer last time somehow...? Now it will.
* Compiled and installed at end of day on 8/23
* Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback.
* Fixed volume controls... were reversed and disabled.
* Added F13-F15 back to fkeys layer in Minivan
* Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan.
* Removed DYN layer.
* Fixed diagram in planck numsym.
* Cleanup for pull request.
* Roadkit flip phone warning.
* Replaced PLAY_NOTES_ARRAY to PLAY_SONG
* reset the submodules
* checked out specific commits for submodules
* Removed debugging from JD45 shared config.h
* Moved custom rules.mk to apropriate keymap
Reset the shared rules.mk file.
* Trailing return issue in rules.mk
Gotta make for a smooth pull request :-)
* Mitosis music troubleshooting
Also updated the song playing function.
Does not work currently.
* Fixed mitosis audio
* Put mitosis/rules.mk back to QMK master
* copied mjt keymaps from archive
* All mjt boards now compile
* fixed jd45-mjt breathing
* Updates to fix SpaceFN but not tested yet.
* Still missing either spacebar or an adjacent keypress.
* Debugging rigged up for use with hid_listen.
* Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c
* Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function.
* Cleaned up JD45 keymap that uses tapkey.
* Redid minivan keymap with numsym rather than raise/lower.
Untested.
* Created my MJT keymap for HHKB
Enabled dynamic macros and moved
somoe of the shortcuts around.
* Minor keymap fixes to make them compile without errors.
* Added home/end to right arrow cluster on DYN layer.
* Added more keys to fn and dyn layers.
* It wasn't using my custom layer last time somehow...? Now it will.
* Compiled and installed at end of day on 8/23
* Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback.
* Fixed volume controls... were reversed and disabled.
* Added F13-F15 back to fkeys layer in Minivan
* Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan.
* Removed DYN layer.
* Fixed diagram in planck numsym.
* Cleanup for pull request.
* Roadkit flip phone warning.
* Replaced PLAY_NOTES_ARRAY to PLAY_SONG
* reset the submodules
* checked out specific commits for submodules
* Removed debugging from JD45 shared config.h
* Moved custom rules.mk to apropriate keymap
Reset the shared rules.mk file.
* Trailing return issue in rules.mk
Gotta make for a smooth pull request :-)
* include variables and .h files as pp directives
* start layout compilation
* split ergodoxes up
* don't compile all layouts for everything
* might seg fault
* reset layouts variable
* actually reset layouts
* include rules.mk instead
* remove includes from rules.mk
* update variable setting
* load visualizer from path
* adds some more examples
* adds more layouts
* more boards added
* more boards added
* adds documentation for layouts
* use lowercase names for LAYOUT_
* add layout.json files for each layout
* add community folder, default keymaps for layouts
* touch-up default layouts
* touch-up layouts, some keyboard rules.mk
* update documentation for layouts
* fix up serial/i2c switches
Turns out that 3c and 3d are not reversed when splitting the right
shift in the way that the Mark I layout does. Reversing it here, rather
than in the generic satan.h to avoid breaking the other layouts.
Fix and issue with the original Sentraq S60-X not being compatible with 'default'. If 'default' shouldn't be changed, perhaps I can create an 'original' revision.
Updated MiniDox split_util.h and eeprom files to reflect this change.
I recommend adding this to any split board that used these files, my changes will not effect them currently.
[Colemak Mod-DH](https://colemakmods.github.io/mod-dh/) layout for
users keeping an `azerty` layout configuration on their OS.
The symbols layers was done after analysing various programming
languages sources codes and should be close to optimal for typing
confort.
The let's split code used delays in its debouncing algorithm which
increases input latency. This commit copies and adapts the code from
`quantum/matrix.c` to lets_split's `matrix.c`.
This protocol breaks out "duplicate" keys into their own entry in the packet so that more complicated logic can be done on the software side, including support for additional languages and alternative theories.
Requires virtser; Allows QMK to speak the TX BOlt protocol used by stenography machines and software (such as Plover). The upside is that Plover can be configured to listen only to TX Bolt allow the keyboard to switch layers without need to enable/disable the Plover software, or to have a second non-Steno keyboard work concurrently.
* merge
* line ending stuff
* Added MiniDox keyboard folder / configs / and some keymaps
* Updated minidox rev1 config, and readme. Also updated that_canadian keymap to include RGB
* cleaned up that_canadian keymap comments
* Fixed RGB being enabled by default, now it must be turned on at the keymap level
This is a setup that is very useful for me. It may or may not be for
you. I will use it in conjunction with the A5 overlayed sv_SE layout.
The layout is subject to change (in particular I'm thinking about adding
a macro recording feature), but it have not changed much the past year
or two so you can expect it to be stable enough to learn it.
A5: http://aoeu.info/s/dvorak/svorak
My xkb map: https://github.com/lindhe/dotfiles/blob/master/usr/share/X11/xkb/symbols/se-A5
The most major points:
======================
L0:
---
* Easily accessible F11 key for fullscreening
* Print screen
* Middle mouse button for X-paste
* Improved reachability of meta buttons (LCtrl, LALt, AltGr, LGui etc.)
* Cluster Page Up/Down + Home/End by the right thumb
* Vim-like arrow layout in right bottom row
* Set media layer toggle to right thumb (Enter)
* Set apostrophe on LCtl (putting it next to some other small
characters)
L1:
---
* Full function key layout
* Teensy button
L2:
---
* Improved media buttons layout (close by the jkl; Vim binding)
* Improved layout of emulated mouse buttons
LED behaviour to binary+CAPS
============================
The ErgoDox LEDs on this layout is using the two rightmost LEDs as the
two LSB in a two digit binary number, representing layer 0, 1, 2 and 3.
The leftmost byte/LED indicates CAPS status.
Instead of having all sendstring keycode mappings in the main quantum.c
file, give each one its own file in keymap_extras that can be #included
in a user's keymap. If one is included, it will define the appropriate
lookup tables and overwrite the weak definitions in quantum.c.
(Including more than one sendstring definition will fail at compile
time.)
Update @rai-suta's test keymap to match, as well as the documentation.
Refactor new-ish JIS_KEYCODE send_string implementation with existing
send_string
Reshuffle JIS in line with other alternative keycodes for sendstring,
and make them all accessible via compile-time options
Add a separate function to allow sending a string with a delay.
* Move Space Caded Parentheses to own layer
The space cadet parentheses where too much distracting. Therefore they are now on the function layer. I also added two more layers for also having angle brackets and curly braces on the shift keys forr better access.
Also updated the README
* Fixed SHIFT+Function key conflict
* Removed Angle Bracket and Curly Bracket layers, as they don't work corrrectly
*NOTE:* it might still be desirable to set the software layout to sv_SE in your
OS.
Swedish (sv_SE) Qwerty layout for ErgoDox, based on the Default configuration
I have tried making this as close of a match I could between the [default
ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware) and a
standard Swedish Qwerty layout.
Notable differences from default:
=================================
* There are three special character buttons (acute accent, circumflex/tilde and
apostrophe/asterisk) that don't have any buttons to map to naturally. I've put
these at other places:
* Acute accent (´) can be found in the lower left corner, conveniently
placed to reach for making an é.
* Apostrophe (') was put in the lower left corner, close to acute accent.
* Circumflex (^) and asterisk (*) was placed in the lower right corner.
* Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left
those out. I could only get the buttons to produce a single one of the
characters. How can I get it to work properly?
* The Alt button on right thumb was exchanged for AltGr (RAlt).
* I changed the backslash in the numpad (layer 1) for a minus. Thought it was
more sensible.
* I didn't find a good place for the "<>|" button, so that one was left out.
That is a problem that really needs to be resolved. Pipe can be found on layer
one, however.
* Added orthodox
* Modified readme
* Modified readme
* Modified readme
* Updated makefile
* Fixed keymap issues
* Modified serial communications to allow for over 8 columns
* Fixed sizeof command
* Fixed some typing issues
* Testing issue #1191 (n-column split i2c slave)
Based on initial OrthoDox (serial) config by @reddragond and others,
this attempts to add TWI (I2C) support.
Relevant: <https://github.com/qmk/qmk_firmware/issues/1191>
- per @ahtn recommendation, using memcpy for moving slave matrix
into slave sending buffer
- slave buffer has been enlarged using sizeof(matrix_row_t)
- note: i2c.h now includes matrix.h
- note: matrix.c includes <string.h>
* Added i2c keymap - right col still not working
* orthodox: re-added i2c keymap, based on serial
* orthodox / issue #1191: trying 9-bit serial
- orthodox serial protocol now sends 9 bits per row, instead of 16.
Technically it's using MATRIX_COLS, so it might work generically.
- ROW_MASK is #defined in serial.c to truncate the checksums to prevent
overflows causing false errors. This macro should be renamed if it's
kept.
* Revert "Fixed sizeof command"
This reverts commit f62a5b9939d6a9c0e442ec403de00c14431a55f9.
Changes had been made to the lets_split serial driver for testing which
mirrored the multi-byte-row changes made to support the orthodox. As the
lets_split does not require these changes, and new improvements had
been added to the orthodox port only, this commit reverts them.
Because the new code could potentially reduce latency over the serial
transport, it may be desirable to re-add in the future, by backporting
the current working orthodox code.
* orthodox: default serial keymap improvements
- formatting has been improved
- a few keys have been shifted, mainly in Raise and Lower layers,
to be more like the default Planck layout
- Now available: F12, Home, End, PgUp, PgDn, Media-Next, Media-Play
Still To Do:
- duplicate for TWI
- Alt modifier
- GUI modifier
* orthodox: failed attempt at 16b/row TWI
- duplicated updated serial keymap for "i2c"
- removed string.h/memcpy, instead
- hardcoded copying of six bytes per update
- still doesn't work; master reports interconnect errors on txled
* orthodox: adjusted default keymap
- this is applied to both 'serial' and 'i2c' keymaps
- Alt and GUI have been added, as they were missing
- comma and period persist across more layers; Home/PgUp and End/PgDn
have been moved slightly to accommodate
* orthodox: revert TWI support to minimum to debug
- disabled ssd1306 and hardware locking in build configuration
- increased TWI buffer from 0x10 to 0x20 bytes
- decreased TWI clock from 400000 to 100000
- removed hardcoded TWI multi-byte sending/receiving
An 'i2c' build of this was found to work on a rev1 Orthodox, although
slave-side col9 was understandably not working. When testing-time
permits, features will be gradually re-enabled towards getting the full
matrix supported over TWI.
* orthodox: TWI (i2c) is working, kludge for col9
The TWI interconnect ("i2c" in directories and build config) is now
working for the Orthodox, including the slave half's column #9.
This is intended as an interim solution, as it's a kludge, not a fix.
Rather than a working multi-byte implementation, the two col9 keys'
bits are packed-into and unpacked-from the two unused bits in row1.
Furthermore, the TWI clock constant has been reduced to 100000 from
400000, as testing revealed the higher value just didn't work.
Testing also found that (with this kludge) increasing the TWI buffer
was not necessary.
This commit leaves many commented-out lines in matrix.c from previous
testing, which will be removed in a future commit once the
interconnects' multi-byte problems have been debugged more thoroughly.
* orthodox: updated readme.md
The readme for the Orthodox now includes a description of the keyboard,
allusions to its author and availability, a linked photo, and links to
the evolving build guide and the current keymap on KLE.
This update has been prepared with /u/Deductivemonkee's assistance.
