GlenPickle
fca03e15b9
Chimera Ortho Readme ( #1943 )
...
* Added Chimera Ortho keymap
* added readme
* fixed hardware link
2017-10-31 20:58:46 -04:00
Erez Zukerman
bc98b0d9eb
Merge pull request #1915 from dondelelcaro/ergodox_ez_left_leds
...
Ergodox ez left leds support
2017-10-31 11:33:09 -07:00
Danny Nguyen
f9881793e3
Add hexwire keymap for Eco
2017-10-31 12:27:49 -04:00
Louis Orleans
b2bbbc2dfc
layout(infinity ergodox): dudeofawesome's layout ( #1932 )
...
* 🎉 Building simple flasher
* 🎉 Flashing works
* 🎨 Cleaning up
* 🐛 Being more specific with board identity
* 🐛 Flashing correct keymap
* 🎉 Adding keymap
* ✨ Updating keymap
* 🚨 RGB
* ⏪ Revert "🚨 RGB"
This reverts commit 9ceabfb267f8daedaad929231229c703abc12ec4.
* ✨ Improvements to flasher
* ✨ Layout tweaks
* 💄 Messing around with LCD
* 💄 Enabling LCD backlight matching
* 🔧 Updating layout
* 🐛 Fixing console logging
* 🎨 Cleaning up indentation
* 🔧 Adding editorconfig
* ✨ Adding game layer
* 💄 Changing numpad layout
* ✨ 🔥 redoing entire layout
It's now more similar to the Planck default layout
* ✨ add workman and dvorak layouts
* 🐛 fix numpad
* 🐛 fix layer orders
* 🐛 fix layer toggling
* 🐛 fix tri-layer switching
* 🐛 fix LCD colors for adjustment layers
* 🔥 remove old flasher project
* 🔥 remove simple_visualizer
* 💄 update LCD colors
* 📝 fix layout comments
* 💄 swapping 2u buttons
* 🔥 🔧 removing editorconfig
* 🚨 using 2 spaces
* 📝 add README
* ⏪ Revert "💄 Enabling LCD backlight matching"
This reverts commit 51577903dfdc9fea5d33e9ab8cfa9b854e7ae19e.
* ⏪ Revert "💄 Messing around with LCD"
This reverts commit fdd9acdae514a3e0e4a7153225053680744980e5.
2017-10-31 11:14:43 -04:00
Gun Pinyo
e555e42aae
add Thai layers for the GunP planck ( #1910 )
...
* Add a layout of planck named GunP, ready for pull request review.
* add Thai layers for the GunP planck
2017-10-31 00:39:33 -04:00
William Wilson
38da7795f4
Added Chimera Ortho keymap
2017-10-31 00:30:24 -04:00
Pentti Laitinen
8c10b60c5f
Initial commit for nordic layout for ergodox infinity.
...
- Added nordic infinity ergodox layout
- Fixed typo in ergodox infinity readme.md
2017-10-31 00:29:51 -04:00
Louis Orleans
1f6002db3f
layout(planck): dudeofawesome's layout with simultaneous RGB and audio support ( #1929 )
...
* layout(planck): new layout initial commit
* feat(planck): add workman layout
* fix(planck): switching to workman
* layout(planck): swapping mnext and mplay
* feat(planck): prep for RGB
* perf(planck): remove plover
saves 256 bytes of memory
* perf(planck): remove colemak
saves 128 bytes
* layout(planck): swapping enter and quote
* perf(planck): disable console
frees 1664 bytes
* feat(planck): RGB under-lighting
* refactor(planck): change RGB pin
Uses pin labeled PB2
* feat(planck): add RGB keycodes
* feat(planck): re-enable audio
* style(planck): fixing indentation
Because who indents like that?
* style(planck): clean up keycodes
* layout(planck): remove del
* feat(planck): add tap-space to layer keys
* docs(planck): specify pin on PCB for RGB
* bug(planck): reducing tap time
* Revert "bug(planck): reducing tap time"
This reverts commit 62606b2dc62c5adcc06cfb5978d7e5305411a658.
* Revert "feat(planck): add tap-space to layer keys"
This reverts commit c74de5a4aa45c5563dcaa463395654c29f50eda3.
* perf(planck): remove backlit case
* feat(planck): swap enter and quote
* bug(planck): moving right shift
* doc(planck): update README
* chore(planck): remove makefile
2017-10-31 00:27:07 -04:00
James Morgan
07017871e5
README, keymap & config update to 3 keyboards ( #1911 )
...
* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware
* Fix terminus_mini & nyquist/DivergeJM readme files
Previously an outdated copy of the default readme. Updated to match the Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout)
* Update makefiles to rules.mk
Renamed both Makefiles to rules.mk, removed references to makefiles
* Updated rules.mk
Inadvertantly removed important code from the rules.mk in previous commit. This has been restored.
Also disabled Tap_Dance in both rules.mk files
* Moved terminus_mini to handwired
Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.
* New Frosty Flake layout for QFR TKL
Added a TKL layout for the Frosty Flake with a navigation cluster on LOWER under the left hand and a similarly functioning MOUSE layer that includes mouse navigation functionality.
* README fix & keymap update for 3 keyboards
Fixed the markdown for the handwired/terminus_mini:default, Nyqyist:DivergeJM & frosty_flake:QFR_JM.
Added TAPPING_TERM = 150 to config.h for all keyboards
Switched LT(LOWER) and LAlt on the mod row for ortholinear boards.
* Update readme for QFR_JM to include make instructions
* Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware "
This reverts commit a45f264ada09acc14fb85390407bc7ff5bb021e3, reversing
changes made to 62349c33410671a33d4041d50cf27de1d6bdd9cf.
* Revert "Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware ""
This reverts commit eae54fb3be2c60dffd704261f84bab98c9e06f93.
* Added QWERTY support to the QFR_JM
Implemented variable default base layer from the Planck default keymap.
* Update README to reflect QWERTY support
2017-10-29 20:07:36 -04:00
Maxr1998
5960d0349c
Add grave key
2017-10-29 20:02:52 -04:00
Sebastian Kaim
0afaed8535
Extended the hint of the programmer to link to the relevant README part instead of giving a generic hint.
2017-10-29 19:59:16 -04:00
Sebastian Kaim
688343f218
Added a better description for the bootloader key
2017-10-29 19:59:16 -04:00
Pentti Laitinen
9ee207acac
Added Iso(ish) layout for tada68. ( #1924 )
...
- Basic layout with one function layer.
- Added correct mapping for ISO layout into tada68.h.
- Readme for the keymap.
2017-10-29 15:22:07 -07:00
Don Armstrong
0bb457e573
document how to define LEFT_LEDS and how that hack is done
2017-10-27 13:46:51 -07:00
Don Armstrong
364aeeec53
implement ergodox_left_leds_update in ergodox_ez
...
Previously, this code was implemented in keymap.c, but I'm unaware of
someone with a different implementation of this particular hack. [If
someone has it, we can add another #ifdef in the future.]
2017-10-27 13:34:03 -07:00
Don Armstrong
2e3b99f7f1
update left led support
2017-10-27 13:24:30 -07:00
Don Armstrong
bcfba27101
add initial support for left leds on an ergodox ez
2017-10-27 13:24:30 -07:00
Ethan Madden
b45b223389
Small documentation and keymap tweaks for my minivan layout ( #1891 )
...
* Added personal minivan keymap
more consistent layer setup
documentation!
slide some things around
more doc jiggling
* Small layout and documentation tweaks
Small documentation updates
dropped Makefile that for some reason was still in my branch
* found and removed extra makefile
2017-10-25 13:01:47 -10:00
Sebastian Kaim
7b754e1a5a
added bfake support as a subproject ( #1903 )
...
* added bfake support as a subproject
also moved existing bmini stuff to a subproject
fixed columns
minor keymap update
making this a subproject
remove old stuff
got subproject stuff figured out
* travis was upset because a board didn't have a default keymap
2017-10-25 13:01:02 -10:00
Manassarn Manoonchai
a3f53aeaa1
Add narze keymaps for Ergodox & Planck with SuperDuper mode implementation ( #1883 )
...
* Fork default planck keymap
* Esc -> CapsLock
* Swap Tilde & Grave in Lower & Raise
* Replace Blacklight key with Raise
* Add Hyper/Esc & Shift/Enter key
* Add super duper mode using S+D combo
* Change superduper mode sound
* Add more functionality to superduper mode
* Fork default
* Replace all left shift to shift/parensopen (space cadet)
* Super / Underscore
* Try superduper on z/slash held
* Use function/macro instead, LGUI_UNDS alone not working
* ✨ Add mouse layer 🐭
* 🐛 Fix superduper
* ✨ Fix GUI_UNDS
* 🐛 Fix registering underscore when releasing too fast
* 🐛 Fix Shift/( with LT z
* ✨ Add superduper for colemak
* ✨ Add Qwerty on software Colemak layout & make Superduper available on multile layouts
* ✨ Enable/disable superduper mode & fix layer switching
* 🐛 Fix superduper not unregister mods
* ✨ Update planck-like ergodox (wip)
* 🐛 Fix return before changing tap count & modify comments
* ✨ Replace with planck code
* 📝 Update readme
* ✨ Fix SuperDuper by using intermediate layers
* Remove LT from inner lower & raise for ease of use
* Change TG to LG
* Add options & disable audio
* 🔧 Enable ignore mod tap interrupt & shorting tapping term
* 📝 Update readme
* Remove including quantum makefile
* 📝 Update readme
* Rename Makefiles
2017-10-25 06:11:07 -10:00
Doug Krieger
6c4639bfac
Add RESET to satan:dbroqua mapping
2017-10-25 02:40:15 -10:00
heartrobotninja
8892c50336
Moving LOCK and adding RUN. Fixing equal key to actually use equal keycode.
2017-10-24 17:07:09 -10:00
Dylan Khor
9128ed50c2
Add macro to sleep Windows 10
2017-10-24 17:04:12 -10:00
Gun Pinyo
21dfa29c28
Add a layout of planck named GunP, ready for pull request review.
2017-10-24 17:01:20 -10:00
ajp10304
a08287b0a0
Added ajp10304 Planck layout ( #1887 )
...
* Added ajp10304 Planck layout
* Removed Makefile from planck ajp10304 keymap
2017-10-23 08:28:52 -10:00
alex-paget
af83c6a4cb
My layout to suit my needs
2017-10-23 08:28:13 -10:00
Damien
e54c8df453
DZ60 changes ( #1890 )
...
* - Fixed DK60 version in config.h
* - Updated dk60 readme with new QMK rules
* - Fixed wording in readme
* Added dbroqua layout for DZ60
I've also updated dz60.h to add "true HHKD" keymap definition (6U
spacebar).
With the default HHKB definition r_alt was not mapped and when I pressed
r_menu it was r_alt.
Regards
2017-10-23 08:27:37 -10:00
James
c2b8a47604
Some finishing touches on space_oddity ( #1892 )
...
* Add verbose comments, ASCII layout pictures, and re-word readme.md
* Fix omission of F(2) on the third layer.
2017-10-23 08:26:52 -10:00
Dylan Khor
07ec609fad
Missing line break in NIU Mini readme ( #1886 )
...
* Missing line break
* More specific URL to the product
2017-10-22 14:53:00 -10:00
mogranjm
a66e75609e
Added new TKL layout for the Frosty flake - Quickfire Rapid ( #1854 )
...
* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware
* Fix terminus_mini & nyquist/DivergeJM readme files
Previously an outdated copy of the default readme. Updated to match the Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout)
* Update makefiles to rules.mk
Renamed both Makefiles to rules.mk, removed references to makefiles
* Updated rules.mk
Inadvertantly removed important code from the rules.mk in previous commit. This has been restored.
Also disabled Tap_Dance in both rules.mk files
* Moved terminus_mini to handwired
Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.
* New Frosty Flake layout for QFR TKL
Added a TKL layout for the Frosty Flake with a navigation cluster on LOWER under the left hand and a similarly functioning MOUSE layer that includes mouse navigation functionality.
2017-10-21 18:32:35 -10:00
drashna
f3534f999f
Updated keymaps ( #1853 )
...
* Add woodpad
* Cleanup
* Remove misc layouts for woodpad
* Move woodpad to handwired
* Updated RGB Underglow info
* Cleanup macros
* Fix odd merge issue
* Tweaked RGB lighting stuff
* Start to merge orthodox/ergodox keymaps (persistant layers)
* Add forced NKRO
* Added Colemak and Dvorak layers to default orthodox keymap
* Added default layer (qwerty/colemak/dvorak) detection to RGB Underglow
* Updated macros and added workman keymaps
* Fixed RGB lighting for Workman layout
* Add leader keys
* Remove force NKRO
* Add Viterbi one handed layout and minor tweaks to others
2017-10-21 18:27:54 -10:00
mondaufgrau
22564d8ee7
Added xd60 ISO keymap ( #1865 )
...
* Added xd60 ISO keymap
* renamed ISO to iso
* some cleaning
* added iso keymap
* some cleaning
2017-10-21 18:26:05 -10:00
Carlos Filoteo
736140439d
Add links to EEPROM files
2017-10-21 18:24:42 -10:00
skullY
9bb259b660
Fix the naming for clueboard files
2017-10-21 13:51:18 -07:00
James
ab3dbd8daa
Additional custom handwired layout - Space Oddity ( #1868 )
...
* Add existing file
* Add new keyboard layout - initial commit
* Revised readme.md
* Clarified readme.md, reorganized keymap.c, and added license text.
* Fixing last incomplete commit
* Just a little code cleanup to make things more readable.
2017-10-21 10:04:35 -10:00
Pittyolo
1954ad1fd8
Added my Let's Split layout ( #1867 )
...
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Add files via upload
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Adding my Let's Split layout
As in my Nyquist layout, ISO Hungrian friendly
2017-10-21 10:02:51 -10:00
Jason Rosenman
3a1ce56aed
Added caps lock + key lock
2017-10-21 10:01:48 -10:00
Jason Rosenman
2f24ed1046
Turned off some unnecessary makefile rules
2017-10-21 10:01:48 -10:00
CarVac
50a4b3510b
Revise carvac_dv keymap for easier alt-tab ( #1871 )
...
* Add carvac_dv keymap for mitosis
* Add mouse keys
* move backspace, etc, and fix tab
* remove commented-out functions in keymap
* Fix scroll buttons and add left/right scrolling
* Make num momentary, add comments, and clean up
* fix mouse scroll acceleration
* Add tab, remove bksp, move print screen
Having tab next to control and alt makes for much easier
alt-tabbing and ctrl-tabbing.
That displaced print screen, but I had never used the non-layer
backspace on the right hand, so I moved printscreen over there.
2017-10-21 10:01:09 -10:00
marcostrauss
57bf00f28f
ErgoDone: VID/PID/NKRO ( #1872 )
...
* - Fancy default PID and option for corresponding VID.
- Information about official VID/PID.
- Correct manufacturer name.
- NKRO enabled by default.
* Resolved build error with `#ifndef FORCE_NKRO`.
2017-10-21 10:00:41 -10:00
heartrobotninja
b25338a809
heartrobotninja ergodox_ez and lets_split layouts ( #1874 )
2017-10-21 09:59:31 -10:00
Danny
b5464cf20a
Add Iris keyboard ( #1863 )
...
* Clone Nyquist code to Iris and rename
* Set keymap and pins
* Work in progress Iris default keymap
* Add Iris rev2
* Update Iris files to new build system
* Add lewisridden keymap
2017-10-19 04:02:00 -10:00
skullydazed
3f3fa07918
Reorganize clueboard into a single directory ( #1855 )
2017-10-17 18:05:21 -07:00
skullydazed
ad49db8cd2
Address #1689 by using a formula to define the breathing curve ( #1692 )
...
* Address #1689 by using a formula to define the breathing curve and exposing defines to control the shape of the curve.
* Tweak the behavior of breathing for clueboard
2017-10-17 16:47:49 -07:00
mogranjm
d3fe6a0588
Add terminus_mini keyboard and nyquist/DivergeJM layout ( #1851 )
...
* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware
* Fix terminus_mini & nyquist/DivergeJM readme files
Previously an outdated copy of the default readme. Updated to match the Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout)
* Update makefiles to rules.mk
Renamed both Makefiles to rules.mk, removed references to makefiles
* Updated rules.mk
Inadvertantly removed important code from the rules.mk in previous commit. This has been restored.
Also disabled Tap_Dance in both rules.mk files
* Moved terminus_mini to handwired
Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.
2017-10-17 06:42:27 -10:00
Max Rumpf
af4697cba5
Add Maxr1998's GH60 layout ( #1849 )
...
* Maxr1998's GH60 layout
* delete unused makefile
* Remove unneeded include
2017-10-16 16:43:40 -10:00
Kenneth Aloysius
b7bb923962
Add NIU Mini from KBDFans ( #1847 )
...
* Add NIU Mini keymap from Planck keymap
* Remove old keymap files
* Fix README, removed Planck references
* Add default layout, move Planck layout to separate folder
* Update README
2017-10-16 13:31:39 -10:00
Benjamin Dengler
ba4b3d9d72
Added BLE support for USB-USB converter. ( #1824 )
...
* Added BLE support to USB-USB converter
* Added readme
* Removed images and Makefile
2017-10-15 15:04:03 -10:00
Jack Humbert
7f2882832e
adds default keymap for handwired boards
2017-10-15 16:52:51 -04:00
Jack Humbert
1745f202cc
update keymaps to not be the canonical file
2017-10-15 16:18:45 -04:00
Jack Humbert
e64313cdb3
adds default keymap for amj60
2017-10-15 16:17:47 -04:00
Salt-Peanuts
e1bcb40e90
Cleaned up my Kinesis layout and created readme. ( #1843 )
...
* Cleaned up keymap and readme
* Cleaned up keymap and readme
* Cleaned up keymap and readme
* Cleaned up keymap and readme
2017-10-15 06:12:39 -10:00
zs
0b023ef67c
Add tomb0y's minidox layout
2017-10-14 19:12:59 -10:00
Jack Humbert
800ec55dfc
Make arguments redo, subproject elimination ( #1784 )
...
* redo make args to use colons, better folder structuring system [skip ci]
* don't put spaces after statements - hard lessons in makefile development
* fix-up some other rules.mk
* give travis a chance
* reset KEYMAPS variable
* start converting keyboards to new system
* try making all with travis
* redo make args to use colons, better folder structuring system [skip ci]
* don't put spaces after statements - hard lessons in makefile development
* fix-up some other rules.mk
* give travis a chance
* reset KEYMAPS variable
* start converting keyboards to new system
* try making all with travis
* start to update readmes and keyboards
* look in keyboard directories for board.mk
* update visualizer rules
* fix up some other keyboards/keymaps
* fix arm board ld includes
* fix board rules
* fix up remaining keyboards
* reset layout variable
* reset keyboard_layouts
* fix remainging keymaps/boards
* update readmes, docs
* add note to makefile error
* update readmes
* remove planck keymap warnings
* update references and docs
* test out tarvis build stages
* don't use stages for now
* don't use stages for now
2017-10-14 11:32:19 -10:00
Stefano Rodighiero
e5dc2253e2
keymap configuration rewritten using the KEYMAP macro defined in atreus.h
2017-10-14 07:01:50 -10:00
Andrew
6531d64ac7
Add YMD96 Keyboard ( #1838 )
...
* add ymd96 base
currently not working correctly.
* Update
honestly not really sure what I've been doing but I'm just more or less brute forcing this until I can get the pcb schematic or something
* honestly just trying stuff out
* Update keymaps
Getting closer hopefully
* ymd96 works!
at least for me
* Update readme
* Update readme
* Update readme
2017-10-14 07:01:02 -10:00
Pittyolo
f9f3afd767
Created cleaner readme and updated the keymap of my layout ( #1840 )
...
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Add files via upload
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
2017-10-14 07:00:00 -10:00
Oscillope
c70b419ec0
Add multiple layout support and Linux flash utility to JJ40 ( #1837 )
...
* Adds support for multiple layouts. Adds custom keymap for "offset"
layout.
* Adds a tool to help detach the keyboard from the Linux HID driver before programming.
* Adds a tool to help detach the keyboard from the Linux HID driver before programming.
2017-10-13 19:04:36 -10:00
unknown
bccf263cd0
Add support for Unikeyboard Felix
2017-10-13 11:24:31 -10:00
Vadim Brodsky
e094cd42b5
Add support for the JJ40 Keyboard ( #1834 )
...
* Add support for JJ40
* Update readme
* Update maintaner
2017-10-13 10:20:56 -10:00
Sebastian Kaim
598cb82655
Extended the programming script for the ps2avrGB keyboard series:
...
- a keyboard already in bootloader mode will now be detected
- if setting the keyboard to bootloader mode doesn't work, a hint will be printed on how to do so
- instead of failing instantly when no keyboard is found, the script will now wait up to 60 seconds (it retries every 5 seconds, up to 12 times)
2017-10-13 05:37:19 -10:00
Donald
74f51009a8
Updated DZ60 HHKB layout and add my own layout ( #1828 )
...
* Updated DZ60 to properly handle HHKB layout, and added my own HHKB layout
* Added dedicated underglow keys
* Fixed compile issue
2017-10-13 05:35:49 -10:00
Otto Rask
122525ee61
Add rask's UK78 and iErgoDox layouts ( #1830 )
...
* Add rask's Satan layout
* Add rask's Satan layout
* Add rask's BananaSplit60 layout
* Add rask's BS60 readme
* Fix rask's BS60 readme image
* Fix rask's BS60 readme image again
* Add rask's UK78 layout
* Change RGui to be LGui to fix locale switching
On Ubuntu the keyboard seemingly lost RGui when toggling
between typing languages. With LGui toggling works normally.
* Add rask's ErgoDox Infinity layout
* Modify ErgoDox layout and add readme for it
* Add rask's UK78 layout readme
2017-10-13 05:35:17 -10:00
Jon Allen
c037d4bb30
Add the Tomato keyboard
2017-10-13 05:23:23 -10:00
Gareth Pye
2cf697d0c8
Tada68 instructions, updated and clarified to avoid bricking keyboards
2017-10-13 05:21:26 -10:00
Jacob Chapman
b3ad561b4f
newkb-atreus-xk
2017-10-10 09:25:39 -10:00
Wunder
ee8860a733
add stock layout for xd75 ( #1731 )
...
* add stock layout for xd75
* fix layout bug
* layout naming
* don't need it
* Cleaning up
2017-10-10 08:13:42 -10:00
marcostrauss
01ac8a6051
ErgoDone keyboard: Improved structure of readme and augmented it with important information. Updated links to moved content.
2017-10-10 07:12:37 -10:00
unknown
f88f042c04
Updated my Gherkin Keymap
2017-10-10 07:11:26 -10:00
drashna
e0e80c0dc1
Cleanup of my keymaps ( #1802 )
...
* Add woodpad
* Cleanup
* Remove misc layouts for woodpad
* Move woodpad to handwired
* Updated RGB Underglow info
* Cleanup macros
* Fix odd merge issue
* Tweaked RGB lighting stuff
* Start to merge orthodox/ergodox keymaps (persistant layers)
* Add forced NKRO
* Added Colemak and Dvorak layers to default orthodox keymap
* Added default layer (qwerty/colemak/dvorak) detection to RGB Underglow
2017-10-10 07:11:05 -10:00
DerMeerkamp
34084b4ee6
geändert: readme.md
2017-10-10 07:10:17 -10:00
DerMeerkamp
f3e61afdc7
geändert: readme.md
2017-10-10 07:10:17 -10:00
DerMeerkamp
2cda124bc1
geändert: keymap.c
2017-10-10 07:10:17 -10:00
DerMeerkamp
951285de67
neue Datei: readme.md
2017-10-10 07:10:17 -10:00
DerMeerkamp
56c2487223
geändert: keyboards/lets_split/keymaps/DE_simple/keymap.c
2017-10-10 07:10:17 -10:00
DerMeerkamp
c5f847a900
neue Datei: keyboards/lets_split/keymaps/DE_simple/Makefile
...
neue Datei: keyboards/lets_split/keymaps/DE_simple/config.h
neue Datei: keyboards/lets_split/keymaps/DE_simple/keymap.c
neue Datei: keyboards/lets_split/keymaps/DE_simple/rules.mk
2017-10-10 07:10:17 -10:00
Pittyolo
31808df294
Added ISO Hungarian friendly keymap ( #1808 )
...
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update keymap.c
2017-10-10 07:08:37 -10:00
Snipeye
cfd118d158
Added Dichotemy Keyboard, updated docs for Pointing Device ( #1817 )
...
* Added Dichotemy Keyboard, updated docs for Pointing Device
* Updated readme
* Updated mouse report pointer in pointing_device.c
2017-10-10 07:07:59 -10:00
Antonio García-Domínguez
20031ab982
Contribute GH60 layout ( #1820 )
...
* Add first version of my layout
* Tweaked layout
* gh60/bluezio: SpaceFn CapsLock interferes with Ctrl+Arrows
2017-10-10 07:07:09 -10:00
Kyle Montag
6d2cb1d9ac
Add my layouts ( #1822 )
...
* all of my updates
* return to base config for xd60.c
* remove janky keymap header definition
* update readme for xd60
* update Planck readme
2017-10-10 07:06:41 -10:00
Rob Rogers
357d930f5a
correct extraneous t
2017-10-06 11:09:03 -10:00
Rob Rogers
8d7cc11d72
correct layer numbers in keymaps
2017-10-06 11:09:03 -10:00
Fabian Topfstedt
120089d917
Consistent fabian layouts for amj40, let's split, planck and xd75 ( #1812 )
...
* slight modifier changes; added plover and reusing jack's default planck keymap as the basis
* space is not shift when held anymore
* added fabian layout (based on jack's default)
* changed fabian layout (based on jack's default)
* changed fabian layout (based on jack's default)
2017-10-06 08:08:35 -10:00
Daniel Shields
d2bbfb9058
Increase one-shot timeout for planck/keymaps/dshields and remove unused includes.
2017-10-06 08:08:06 -10:00
BenKesselring
ea819268f3
Add new 4x12 ortho layout & add credit to XD75 port ( #1782 )
...
* add xd75, preliminary RGB'
* fix RGB
* add backlight support (probably)
* updated readme and tweaked keymap
* added xd75 to list in /keyboards
* copyright ALL the things, create blank slate for Colemak Mod-DH Split/Wide keymap
* Add preliminary split Colemak Mod-DH layout
* changing stuff to compile properly
* attribution
* moar attribution
* removed incomplete keymap
* Create Colemak Mod-DH Wide layout for 4x12 ortho.
* Move Adjust key
* Add layou timage to readme
* fix naming
* Fix stupid issue with not understanding how the keymap works
* forgot to switch COLEMAK to COLEMAKDH...
* Remove and link image
* Remove and link image
2017-10-06 04:20:28 -10:00
Dylan Khor
e0834cfda9
Update Let's Split readme
...
Updated Let's Split readme to reflect `make` changes in #1659 , removed incorrectly used apostrophe and other spelling / grammar errors
2017-10-05 13:42:17 -10:00
Campbell Barton
c206650ed0
[cleanup] consistent 2 space indentation
...
Was mixed between 2&4
2017-10-05 07:28:42 -10:00
Dylan Khor
e446eddca9
Adding my Roadkit keymap ( #1798 )
...
* Initial khord roadkit keymap
* Remove bad readme
* Transfer dot through to layer 2 and add clarifications to layout comments
2017-10-05 07:22:58 -10:00
Cory Shaw
01bf8e1643
Mbsurfer Let's Split keymap updates ( #1787 )
...
* Fix mbsurfer let's split layout RGB indicators when both lower and raise are pressed
* Update mbsurfer let's split keymap with new RGB key codes for modes
* Clean up mbsurfer keymap matrix layout
2017-10-03 09:05:10 -10:00
Philippe Voinov
efbc4d2295
Add new planck layout ( #1778 )
...
* Custom layout: tehwalris
* Prevent stuck modifiers.
2017-10-03 07:45:22 -10:00
Fred Sundvik
25285a1c5a
Don't process keycodes on the slave
2017-09-30 06:22:02 -10:00
skullydazed
5fd68266f5
Clueboard 60% support ( #1746 )
...
* initial clueboard_60 support
* LED lighting support
* fix the clueboard->clueboard_66 rename
* Add layout support to clueboard_60
* Fix the 60_iso layout so it's actually iso
* add a default keymap for AEK layout
* fix clueboard_17
* Fixup the ISO layouts
* Fix the `wait_ms()/wait_us()` definitions for chibios
* Fix up the wait_ms/wait_us hack. Reduce stack size.
* Add a missing #include "wait.h"
* commit files that should have already been comitted
2017-09-29 16:17:30 -07:00
Matt
b736f25e85
added matrixman layout
2017-09-29 11:53:27 -10:00
drashna
d28fb63fac
updated drashna's keymaps ( #1769 )
...
* Add woodpad
* Cleanup
* Remove misc layouts for woodpad
* Move woodpad to handwired
* Updated RGB Underglow info
2017-09-29 11:52:37 -10:00
mechmerlin
6ec7ccec63
Support for KBP V60 Type R 60% keyboard ( #1770 )
...
* Support for KBP V60 Type R 60% keyboard
Support does not include in switch or underglow lighting for Polestar Edition.
* rename v60type_r to v60_type_r
* Remove old v60type_r
* Modify readme.md to adhere with QMK readme formatting.
2017-09-29 11:51:12 -10:00
Jack Humbert
791b9cc652
remove all makefiles from keyboard directories
2017-09-27 08:21:09 -10:00
Ethan Madden
e2480a299e
?= -> =
2017-09-25 19:36:44 -04:00
Ethan Madden
692c4e7508
Added Obelus
...
tearing it down so that it can be rebuilt
fiddling with audio
big default config overhaul
apparently startup sounds work without the override now
readme!
readme fixes
readme tweaking
2017-09-25 19:36:44 -04:00
Florian Beeres
f1c7b813aa
New layout for XD60/64 ( #1748 )
...
* Add yuuki keymap
Documentation is still a TODO and the keymap may not be final
* GRV on colon
* add KC_GRV to FN ESC
* hhkb ish
* hhkbish 2
* HHKBish and documentation
* Fix Markdown warnings
* typo
2017-09-25 13:31:42 -04:00
Fred Eisele
a00532759b
Move work from pinky fingers to thumbs and index fingers ( #1749 )
...
* phreed keymap added
This keymap moves many pinky keys to the center
* set to do what I want but LT() does not return to previous layer
* get overlays working
* get overlays working
* fix the readme
* fix the readme
* swapped the shift
* swapped the shift
* propagate mods
* clear special char on readme
2017-09-25 13:30:58 -04:00
Danny
5dab2ef12a
Update Viterbi default layout ( #1753 )
...
* Implement sticky modifiers
* Change underglow based on sticky mod status
* Set RGB lights based on which mods are stickied
* Add controls for dimming RGB LEDs
* Only update RGB lights if modifiers have changed
* Use all LEDs to show modifier state
* Create default keymap for Viterbi
2017-09-25 13:21:27 -04:00
Kenny Hung
a67c930e9e
XD75RE Custom layout, and clarification in readme.md ( #1754 )
...
* Duplicate default layout as basis of my own
* Basic Colemak layer, just to practice flashing
* Add reset button so that we don't have to short out the reset button on the board to flash it.
* Symbols layer
* Navigation layer, and remove unused keys. Now usable, nice.
* Correct backspace for UK QWERTY mapping
* Small clarification in XD75RE readme instructions
* Use UK pipe so that I can type a pipe on a UK keyboard
2017-09-25 13:20:41 -04:00
unknown
56d750659a
Removed unneeded code from keymap
2017-09-25 13:15:04 -04:00
unknown
169d46ce83
Add my gherkin keymap, and update readme and config
2017-09-25 13:15:04 -04:00
Jack Humbert
aef36ada02
add conditional for planck-mitch keymap
2017-09-24 23:50:18 -04:00
Yan-Fa Li
878774b24e
Contribute a DZ60 keymap for 67 key configuration
2017-09-21 09:43:27 -04:00
Danny Nguyen
8c02748c81
Update Viterbi keymaps
2017-09-21 09:40:13 -04:00
Danny Nguyen
37b9715cbc
Update default Viterbi layout
2017-09-21 09:40:13 -04:00
Danny Nguyen
94823176c5
Adjust Viterbi pinout
2017-09-21 09:40:13 -04:00
Danny Nguyen
92b74e2d36
Rename cloned Nyquist files to Viterbi, create temporary keymaps
...
Add WIP keymap for dwallace
2017-09-21 09:40:13 -04:00
Danny Nguyen
72e9939143
Clone Nyquist keyboard for Viterbi
2017-09-21 09:40:13 -04:00
Jack Humbert
4c75285816
add filess
2017-09-21 00:32:01 -04:00
Jack Humbert
d77e55d31e
move keymap to rules.mk
2017-09-21 00:27:14 -04:00
Batuhan Baserdem
31e78d22b4
Turkish planck keymap ( #1675 )
...
* Adding keymap
* Adding keymap
* Compiles now, but doesn't flash
* Fixes issues with compilation
* Trying to fix issues with tap-dance layer
* Trying to fix issues with tap-dance layer
* Trying to fix issues with tap-dance layer
* Fixed bbaserdem layout
* Added keyboard layout image
* Edited README.md
* Changed layout and removed image from README.md
* Changed tapping terms
* Changed layout a bit
2017-09-21 00:19:57 -04:00
U-SALTY-WINTENDO\Haj Okuda
ea7792b6c6
Adding my keymap with Colemak Mod-DH
2017-09-21 00:16:43 -04:00
Michael F. Lamb
b1d6005c52
add layout mitosis-datagrok (workman variant)
2017-09-21 00:16:22 -04:00
Jack Humbert
32d6a8b7ec
adds DZ60 support ( #1734 )
...
* adds support for dz60
* fix dz60 readme
2017-09-19 10:27:46 -04:00
QMK Bot
0c335270bd
convert to unix line-endings [skip ci]
2017-09-19 04:47:16 +00:00
Rozakiin
62a02af915
Fixed uk78 and turned Bootmagic off ( #1725 )
...
* Add files via upload
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Update config.h
2017-09-19 00:44:43 -04:00
Nicolas Guelpa
3173924421
Adding a new layout for the planck that helps when coming from the pok3r ( #1701 )
...
* adding new layout for the planck that helps when coming from the pok3r
* Fixing the function layer
* Update readme.md
* Update keymap.c
Making some small adjustments
* Update keymap.c
switching GUI and Esc
* Update keymap.c
2017-09-18 17:13:01 -04:00
Daniel Shields
87021371e6
Remove redundant Makefile.
2017-09-18 17:07:41 -04:00
Phil Hagelberg
2a02df84b6
Improve readme and PID codes for Atreus.
2017-09-17 00:04:08 -04:00
krusli
25aa474246
Updated RGB code to use event.pressed
2017-09-16 09:34:29 -04:00
krusli
c7ebb0f950
Add RGB code (from ps2avrgb and luizribeiro/qmk_firmware)
2017-09-16 09:34:29 -04:00
krusli
a8a02455f5
Keymap updates
2017-09-16 09:34:29 -04:00
krusli
6cfb85f32f
Fixes for RGB, more colours
2017-09-16 09:34:29 -04:00
krusli
0b7df9f2ef
Update on/off toggle behaviour for RGB LEDs
2017-09-16 09:34:29 -04:00
krusli
d281cd5c40
Change max brightness level for iOS
2017-09-16 09:34:29 -04:00
krusli
69ab37fca1
Got luizribeiro's ps2avrgb implementation working for Mechmini
2017-09-16 09:34:29 -04:00
Andrew Plaza (insidious)
6198fed566
Updated README in ergodox_infinity keyboard ( #1702 )
...
* changed 'infinity' to 'ergodox_infinity' and specified to be in the top-level directory as per recent changes to directory structure of QMK_firmware git repo
* accidently removed '-' in last line of readme
2017-09-15 22:01:51 -04:00
lucwastiaux
3e1f388bda
Adding Ergodox EZ and Atreus Dvorak 42-key layouts ( #1705 )
...
* importing 42 key dvorak layout
* added comment for build instructions
* adding atreus dvorak 42 key layout
* added readme
* add readme
* build instructions
* additional MEH shortcuts
2017-09-15 22:00:26 -04:00
Jack Humbert
dc7d0c7b74
update to driver separation
2017-09-15 21:43:58 -04:00
krusli
afcf3a2878
Update Mechmini keymap, reduce reported power consumption for iOS Camera Adapter compatibility
2017-09-15 20:11:40 -04:00
Dylan Khor
ee9a20ff37
Cleaned, revised, and updated my keymaps to reflect new changes/defaults ( #1712 )
...
* add new RGB keycodes and clean up lets split keymap
* extraneous cases
* More cleanup and added macro
* one more macro
* cleaned up my planck keymap and added macros
* Transitioned planck keymap to new formatting / audio modes based on new default
* Remove extraneous newline in song list, add keycodes missed in previous commit
* error in graphical representation of keycodes
2017-09-15 19:21:46 -04:00
Danny
5eb5b6074c
Add Levinson keyboard ( #1723 )
...
* Fork lets_split to levinson
Update subproject default
* Update Readme
* Pass LED backlight info from master to slave over serial
2017-09-15 19:20:50 -04:00
Hugh
19f48fa922
"New" Atreus Keymap ( #1717 )
...
* Merge with upstream
* Finish merge
* Add new keymap
* Change use of KEYMAP macro
* Add Readme.md
* Fix link
* Clean up comments
* Raise on leading edge of keypress
2017-09-15 15:51:47 -04:00
Danny Nguyen
c02de0932a
Remove accidentally pasted line in MF68 readme
2017-09-15 15:49:57 -04:00
Florent C
17c84f24cd
Adapt build instructions to new keyboard name
2017-09-15 15:49:36 -04:00
Christopher Browne
a07d1f22aa
Some revisions to cbbrowne Planck keymap, and a preliminary xd75 keymap ( #1715 )
...
* Add HOME/END keys as upper/lower on arrow-up/down
* Reduce .hex file size by turning off unneeded options
* Put digit keypad onto left hand upon RAISE; this will sometimes be preferable to double-hits of right hand
* Latest super latest version merge
* cbbrowne keymap for XD75re
* starting notes on XD75re keymap plans
* First draft of bottom row of QWERTY
* Switch my special bottom line over to QCENT
* Dunno
* Filling in wanted keys, bit by bit...
* Add copyright, extra macro
* Clean up comments, remove some experimental code I didn't like
* TODO plans for xd75re
* clean up keyboard layout
* QCENT2 is my new experiment for the main keyboard...
* Add a few more main layer keys, and modify LOWER to shift things outwards to conform with main layer
* Clean up RAISE layer to conform with main layer, remove QCENT layer as QCENT2 is the new thing
* More xd75 changes, now that I actually have it in hand
* shift keymap around, as original attempt was a bit too aggressive in keeping to the edges
* more revs to XD75
* Dropping parts of the centre keypad in favor of Keys I Really Need
* Improve documentation to conform with how builds are done now
* Improve documentation to conform with how builds are done now
* Add cbbrowne rules file as alternative to having the rules in Makefile
* Makefile not needed anymore for individual keymap
2017-09-14 14:02:49 -04:00
Harshit Goel
23ce0b43b6
Further updated ergodone readme.md ( #1714 )
...
* updated read.md file
* added image to flash hex on ergodone
* corrected image link
* updated direct image link
* image with larger text
2017-09-14 13:05:29 -04:00
Danny
4549dcd21f
Add support for MF68 replacement PCB for Magicforce 68 ( #1698 )
...
* Port TMK code for MF68
* Change KEYMAP to KC_KEYMAP and add macro
2017-09-13 17:53:10 -04:00
Goel
7da585917b
updated read.md file
2017-09-13 17:51:30 -04:00
Sean Hunter
cf001300b3
[planck] Adds Sean Hunter keymap( #1706 )
...
* Sean Hunter initial keymap
* Update old map to sync it up with new one
* Add TODO
fix a few minor things
* small doc fixes
* Minor fixups
2017-09-13 17:47:48 -04:00
Danny Nguyen
63028dde82
Add jojiichan keymap
2017-09-13 17:46:25 -04:00
Jack Humbert
7ad924bae5
Updates send_string functionality, adds terminal feature ( #1657 )
...
* implement basic terminal stuff
* modify send_string to read normal strings too
* add files bc yeah. working pgm detected
* pgm detection apparently not working
* adds send string keycodes, additional keycode support in send string
* implement arguments
* [terminal] add help command
* [terminal] adds keycode and keymap functions
* [terminal] adds nop.h, documentation
* update macro docs
2017-09-12 00:43:10 -04:00
Kaleb Elwert
a4ff8b91f7
Update tv44-belak keymap
2017-09-10 22:59:30 -04:00
Marco
63cde006c5
Changed USB manufacturer to "JMWS"
...
Don`t know, if this is 100% correct, but the original software refers
to "JMWS JM60 Driver".
2017-09-10 22:58:55 -04:00
Marco
d331e274b3
Use KC_GESC keycode instead of custom function
2017-09-10 22:58:55 -04:00
Marco
349e0012ba
Basic support for JM60 keyboard
...
This adds basic support for JM60 RGB PCB that was sold
by KBDfans https://kbdfans.myshopify.com/
https://www.aliexpress.com/store/product/JM60-RGB60-Custom-mechanical-keyboard-PCB-ANSI/2230037_32810956675.html
No support for RGB Backlight yet.
2017-09-10 22:58:55 -04:00
Jack Humbert
f10e9586df
adds a default ergodox_infinity keymap
2017-09-10 00:10:35 -04:00
skullydazed
4cdcbdb861
Remove all Makefiles from the keyboards directory. ( #1660 )
...
* Remove all Makefiles from the keyboards directory.
* update keymaps added in the last 8 days
* Ignore keyboard/keymap makefiles
* update hand_wire to reflect our new Makefile-less reality
* Update the make guide to reflect the new reality
* move planck keymap options to rules.mk
* update planck keymaps 4real
* trigger travis
* add back build_keyboard.mk
* restore changes to build_keyboard
2017-09-08 13:47:50 -04:00
Jack Humbert
cf8e10533b
update some keymaps that broke w/defaults
2017-09-08 01:42:32 -04:00
Hugh
0759adeaf1
Split atreus ( #1680 )
...
* Merge with upstream
* Add split_atreus keymap for lets_split.
* Move bspace
* Tidy up keymap
* Update layer enum
* Temporary fix
* Finish merge
* Added keys for testing
* Revert temporary fix
* Remake keymap using default let's split map as base. ASCII art not
updated
* Remove non-functioning layers
* Rename folder
* Update ASCII art
* Remove vestiges of ADJUST layer
* Remove nonexistent layer #defines
* Rename folder to avoid confusion
* Add Readme.md
* Formatting
* Description of underscores in layer maps
2017-09-06 18:33:52 -07:00
Jason Milkins
43a1ea3035
Add TKL keymap for Frosty_Flake ( #1666 )
...
* Add TKL keymap for Frosty_Flake
* Update readme.md
* Add spaces for ghfm newlines
* add note for dfu target
2017-09-06 17:42:19 -07:00
skullydazed
af14e672c9
Add a clueboard rev3 ( #1688 )
...
* Allow the knight animation to be restricted to a portion of the LED strip
* Add keys for jumping directly to particular animation modes
* Remove orphaned break statements
* Tweak the `RGB_MODE` buttons so they cycle through the same mode.
* small indentation fix
* Add a new revision of the clueboard with 18 underlight LEDs
2017-09-06 15:27:29 -07:00
skullydazed
4580d3a730
RGB improvements ( #1684 )
...
* Allow the knight animation to be restricted to a portion of the LED strip
* Add keys for jumping directly to particular animation modes
* Remove orphaned break statements
* Tweak the `RGB_MODE` buttons so they cycle through the same mode.
* small indentation fix
2017-09-06 14:49:19 -07:00
CarVac
323fa19e2d
Dvorak-optimized Mitosis keymap with mouse keys ( #1676 )
...
* Add carvac_dv keymap for mitosis
* Add mouse keys
* move backspace, etc, and fix tab
* remove commented-out functions in keymap
* Fix scroll buttons and add left/right scrolling
* Make num momentary, add comments, and clean up
* fix mouse scroll acceleration
2017-09-06 10:19:35 -07:00
Ethan Madden
de0e025472
Added personal minivan keymap ( #1681 )
...
more consistent layer setup
documentation!
slide some things around
more doc jiggling
2017-09-06 09:48:21 -07:00
Jay Liu
b032867236
Update Infinity Ergodox Makefile ( #1682 )
...
I believe this change is needed in response to the recent change in folder structure.
2017-09-06 09:47:41 -07:00
Rob Rogers
4d5b7dea14
Let's split hand mirroring support
...
commit b7a1c6fe3f0709d176a7833387051b2323b16f17
Author: Rob Rogers <r2d2rogers@gmail.com>
Date: Wed Sep 6 08:28:00 2017 -0500
add hand swap config matrix for Let's Split
commit 1d53113d96b711db549f735316c2ea3f7469021b
Merge: 98f40e3 4edfa9794f8b75f0db2c0ba2ad5779603024b0c6dcd54360b3aa7fbc5cab5e471d1c0288198a9933701cdd3803f
2017-09-06 09:20:49 -07:00
Jack Humbert
4d5eeb3d7d
update planck stuff
2017-09-06 12:19:40 -04:00
Lukmanul Hakim
f0db2c0512
Set proper backlight level
2017-08-31 09:58:04 -04:00
QMK Bot
8ea690a1b3
convert to unix line-endings [skip ci]
2017-08-30 15:55:39 +00:00
David Stosik
5b897ce223
Port #1576 to Let's Split: EECONFIG_HANDEDNESS gets overridden when RGB is enabled
2017-08-30 11:51:58 -04:00
Otto Rask
da33dfec55
rask's Satan and BananaSplit60 ( #1654 )
...
* Add rask's Satan layout
* Add rask's Satan layout
* Add rask's BananaSplit60 layout
* Add rask's BS60 readme
* Fix rask's BS60 readme image
* Fix rask's BS60 readme image again
2017-08-30 11:51:18 -04:00
Michael Terhar
a4316ba486
Fixed mitosis-mjt audio ( #1653 )
...
* copied mjt keymaps from archive
* All mjt boards now compile
* fixed jd45-mjt breathing
* Updates to fix SpaceFN but not tested yet.
* Still missing either spacebar or an adjacent keypress.
* Debugging rigged up for use with hid_listen.
* Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c
* Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function.
* Cleaned up JD45 keymap that uses tapkey.
* Redid minivan keymap with numsym rather than raise/lower.
Untested.
* Created my MJT keymap for HHKB
Enabled dynamic macros and moved
somoe of the shortcuts around.
* Minor keymap fixes to make them compile without errors.
* Added home/end to right arrow cluster on DYN layer.
* Added more keys to fn and dyn layers.
* It wasn't using my custom layer last time somehow...? Now it will.
* Compiled and installed at end of day on 8/23
* Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback.
* Fixed volume controls... were reversed and disabled.
* Added F13-F15 back to fkeys layer in Minivan
* Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan.
* Removed DYN layer.
* Fixed diagram in planck numsym.
* Cleanup for pull request.
* Roadkit flip phone warning.
* Replaced PLAY_NOTES_ARRAY to PLAY_SONG
* reset the submodules
* checked out specific commits for submodules
* Removed debugging from JD45 shared config.h
* Moved custom rules.mk to apropriate keymap
Reset the shared rules.mk file.
* Trailing return issue in rules.mk
Gotta make for a smooth pull request :-)
* Mitosis music troubleshooting
Also updated the song playing function.
Does not work currently.
* Fixed mitosis audio
* Put mitosis/rules.mk back to QMK master
2017-08-30 11:50:31 -04:00
drashna
9987f9dcff
Update drashna's keymap ( #1649 )
...
* initial commit for my custom layout
* fix switching into and out of numfun layer
* enable tap dance to lock layers
* enable layer indicator LEDs
* remove Colemak2 layer because it was dumb
* remove handler for nonexistent keycode
* add new movement keys to lower layer
* standardize indentation because I'm not a monster
* add Woodpad keyboard with Michael's Tryggve layout
* Add dvorak/colemak layers
* add hash
* Update keymap.c
* Fixed OSL Symbol layer layout issue
* Minor later tweak
* Clean up actions
* Diablo 3 macro keys remove
* Fixed numbad issues
* Remove Underglow toggle
* Fix layer consistency
* cleanup of code
* line feed
* small fixes
* Major merge
* Merge cleanup on my keymap
* Cleanup
* Update compile command
* Swapped arrows
* Additional cleanup
* Revert "Woodpad"
* update
* minor update
* staging for pull request
* Finish removing layer underglow toggles
2017-08-30 11:36:14 -04:00
Fredric Silberberg
ad73553aa9
Update README.
2017-08-30 11:28:56 -04:00
Fredric Silberberg
00d8f0c082
Small gaming layer and formatting updates to my nyquist config.
2017-08-30 11:28:56 -04:00
Jack Humbert
a729d852fe
Merge pull request #1574 from danamlund/master
...
New clueboard keymap that is a tetris game
2017-08-30 11:27:52 -04:00
Arthur SCHMITT
da7aece043
Add the new QMK submodule way in /lib and not tmk_core/tool wich is outdated
2017-08-30 11:26:24 -04:00
Michael Terhar
7960302242
Keymaps for several of my boards ( #1641 )
...
* copied mjt keymaps from archive
* All mjt boards now compile
* fixed jd45-mjt breathing
* Updates to fix SpaceFN but not tested yet.
* Still missing either spacebar or an adjacent keypress.
* Debugging rigged up for use with hid_listen.
* Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c
* Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function.
* Cleaned up JD45 keymap that uses tapkey.
* Redid minivan keymap with numsym rather than raise/lower.
Untested.
* Created my MJT keymap for HHKB
Enabled dynamic macros and moved
somoe of the shortcuts around.
* Minor keymap fixes to make them compile without errors.
* Added home/end to right arrow cluster on DYN layer.
* Added more keys to fn and dyn layers.
* It wasn't using my custom layer last time somehow...? Now it will.
* Compiled and installed at end of day on 8/23
* Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback.
* Fixed volume controls... were reversed and disabled.
* Added F13-F15 back to fkeys layer in Minivan
* Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan.
* Removed DYN layer.
* Fixed diagram in planck numsym.
* Cleanup for pull request.
* Roadkit flip phone warning.
* Replaced PLAY_NOTES_ARRAY to PLAY_SONG
* reset the submodules
* checked out specific commits for submodules
* Removed debugging from JD45 shared config.h
* Moved custom rules.mk to apropriate keymap
Reset the shared rules.mk file.
* Trailing return issue in rules.mk
Gotta make for a smooth pull request :-)
2017-08-26 23:33:33 -04:00
Toshiki Yagi
de315c54eb
make ergodone's led work well
2017-08-26 23:32:25 -04:00
unknown
a6fe0320f5
Updated readme to new standard.
2017-08-26 23:31:47 -04:00
unknown
78ab926cc8
Updated my files and added debouncing
2017-08-26 23:31:47 -04:00
Cory Shaw
b28982e329
Add mbsurfer Let's Split keymap with RGB layer indicators ( #1638 )
2017-08-26 10:34:53 -04:00
Joe Wasson
8e1c3f410d
Add split layout to more keyboards.
2017-08-26 10:34:07 -04:00
Cory Shaw
2aedbf872b
Improve default layout of 9key and give example macro
2017-08-24 21:29:10 -04:00
Cory Shaw
afd7bf5f09
Increase time for tap dancing on 9key default
2017-08-24 21:29:10 -04:00
Cory Shaw
402235eeb4
Update Bishop Keyboards url to relaunched site
2017-08-24 21:29:10 -04:00
Cory Shaw
b2d033ffe8
Add 9key to keyboards readme
2017-08-24 21:29:10 -04:00
Joe Wasson
ae91af95e2
Add split ansi layout and talljoe's keymap.
2017-08-24 15:52:08 -04:00
Jack Humbert
9a23fad36b
update ergodox links
2017-08-24 08:00:50 -04:00
Jack Humbert
d2ff66a985
Creates a layouts/ folder for keymaps shared between keyboards ( #1609 )
...
* include variables and .h files as pp directives
* start layout compilation
* split ergodoxes up
* don't compile all layouts for everything
* might seg fault
* reset layouts variable
* actually reset layouts
* include rules.mk instead
* remove includes from rules.mk
* update variable setting
* load visualizer from path
* adds some more examples
* adds more layouts
* more boards added
* more boards added
* adds documentation for layouts
* use lowercase names for LAYOUT_
* add layout.json files for each layout
* add community folder, default keymaps for layouts
* touch-up default layouts
* touch-up layouts, some keyboard rules.mk
* update documentation for layouts
* fix up serial/i2c switches
2017-08-23 22:29:07 -04:00
Jack Humbert
7260fc3eef
update 9key readme
2017-08-23 15:46:02 -04:00
Steve Holt
d54360b1d8
Update keymap.c
2017-08-22 23:53:41 -04:00
Steve Holt
fe4549839e
Update config.h
2017-08-22 23:53:41 -04:00
Steve Holt
1d930ebe45
Update Makefile
2017-08-22 23:53:41 -04:00
Jonathan Boyett
fcb60b1601
fix link brackets
2017-08-22 23:33:38 -04:00
Cory Shaw
3aa7fbcd79
fix(9key): Fix layout of 9key readme
2017-08-22 23:09:12 -04:00
Cory Shaw
82f434a4d4
update(9key): Add readme with updated format
2017-08-22 23:09:12 -04:00
Cory Shaw
d8fd33dd5e
Add support for 9key by Bishop Keyboards
2017-08-22 23:09:12 -04:00
Jonathan Boyett
bd484f18bd
JD40 MiniVan port
2017-08-22 23:07:52 -04:00
Ryan MacLean
9f6362e4df
Adding Makefile
...
Required for JIS layouts
2017-08-22 17:59:38 -04:00
Ryan MacLean
57c93c13cc
Creating Mac Version of JIS Keymap
...
Swapping command and alt, restoring fn+left for delete, subbing in grave for hhkb key.
2017-08-22 17:59:38 -04:00
jpetermans
7a445d9167
Add back original copyrights
2017-08-21 23:22:36 -04:00
jpetermans
ff32643641
Readme correction #2
2017-08-21 23:22:36 -04:00
jpetermans
dbd4ce19e9
Correct jpetermans keymap readme and update copyright info
2017-08-21 23:22:36 -04:00
Daniel Shields
69c4cfb238
Fix gherkin README to use correct build command.
2017-08-21 17:04:31 -04:00
Mark Spanbroek
36709d6a30
Use cmd-left and cmd-right instead of ctrl-a and ctrl-e for home and end
...
The ctrl commands only seem to work well in terminal, not in other apps.
2017-08-21 17:01:27 -04:00
Mark Spanbroek
1ab9e5d1c9
Remove COMPACT_KEYMAP, use full KC_ keycodes instead.
2017-08-21 17:01:27 -04:00
Mark Spanbroek
f4b3b576a0
Revert "Add COMPACT_KEYMAP macro to Satan GH60"
...
9a1826598a1a06d87459c5bbef9db9be277bdae9
2017-08-21 17:01:27 -04:00
Mark Spanbroek
dc1d24a4fe
Add screen lock key
2017-08-21 17:01:27 -04:00
Mark Spanbroek
0be483c762
Fix power; use keyboard shortcut for Mac
2017-08-21 17:01:27 -04:00
Mark Spanbroek
cb719757c2
Reverse the split shift/fn
...
Turns out that 3c and 3d are not reversed when splitting the right
shift in the way that the Mark I layout does. Reversing it here, rather
than in the generic satan.h to avoid breaking the other layouts.
2017-08-21 17:01:27 -04:00
Mark Spanbroek
d172d6bec6
Add Mark I layout
2017-08-21 17:01:27 -04:00
Mark Spanbroek
90b07a5be4
Add COMPACT_KEYMAP macro to Satan GH60
2017-08-21 17:01:27 -04:00
Mark Spanbroek
af21fa63e5
Fix: add missing keys to Satan GH60 KEYMAP macro
2017-08-21 17:01:27 -04:00
Stephen Tudor
dde035b963
Add smt keymap for Sentraq S65-X
2017-08-21 16:59:52 -04:00
Jack Humbert
e7b3991b97
fix readmes
2017-08-21 16:51:16 -04:00
Jack Humbert
1ce3971c90
adds sweet16 and four banger keyboards
2017-08-21 16:51:16 -04:00
Ben James
48e79cbe29
Create readme.md
2017-08-20 20:57:22 -04:00
Ben James
68dafc8382
Create Makefile
2017-08-20 20:57:22 -04:00
Ben James
e0d9cc945f
Create config.h
2017-08-20 20:57:22 -04:00
Ben James
7aa839915e
Create keymap.c
2017-08-20 20:57:22 -04:00
Jack Humbert
166706a32c
adds subatomic files (non-working)
2017-08-20 13:52:28 -04:00
Joe Wasson
948d6efcfb
Fix stray keystroke in readme file.
2017-08-20 13:28:39 -04:00
Joe Wasson
fe60cbd928
Remove PLAY_NOTE_ARRAY usages to get rid of warning.
2017-08-20 12:32:20 -04:00
Jack Humbert
f94963e6b7
Merge pull request #1608 from hot-leaf-juice/master
...
keymap update
2017-08-20 11:52:57 -04:00
Joe Wasson
4b74c9056b
Fix Planck Steno layout with new error message (remove MIDI).
2017-08-20 11:51:57 -04:00
Joe Wasson
e74a95bf26
Keymap tweaks.
2017-08-20 11:51:57 -04:00
Joe Wasson
eb5748e8bf
Gherkin keymaps for Steno and Talljoe
2017-08-20 11:51:57 -04:00
That-Canadian
937b86d030
Added default ECO keymap
2017-08-20 11:47:46 -04:00
That-Canadian
cc9b0eb109
Line ending stuff again
2017-08-20 11:47:46 -04:00
Daniel Khodabakhsh
046595f521
Update s60_x/default/rule.mk for original Sentraq S60-X
...
Fix and issue with the original Sentraq S60-X not being compatible with 'default'. If 'default' shouldn't be changed, perhaps I can create an 'original' revision.
2017-08-20 11:45:18 -04:00
Jack Humbert
81d7e7d4c8
Merge pull request #1601 from dlaroe/master
...
My keymaps only
2017-08-19 08:19:50 -04:00
Balz Guenat
30ac7d403e
remove dead links, add troubleshooting section
2017-08-19 08:19:16 -04:00
Balz Guenat
6ea408da10
Update USB-USB converter README according to #1588
2017-08-19 08:19:16 -04:00
Ryan MacLean
1132646b2f
Update readme.md
2017-08-19 08:18:27 -04:00
Ryan MacLean
9eb71e9719
Update readme.md
2017-08-19 08:18:27 -04:00
Ryan MacLean
9ea56f03a1
Fixing readme clobber
2017-08-19 08:18:27 -04:00
Callum Oakley
a6845036e2
Merge branch 'master' of https://github.com/qmk/qmk_firmware
2017-08-19 10:34:45 +01:00
4c4a174dbe
Added Preonic Makefile and readme.md
2017-08-18 17:45:32 -04:00
8b62a0af74
Updated keymaps with second LOWER for the right hand
2017-08-18 17:29:19 -04:00
Danny Nguyen
7277f09bba
Update Nyquist readme file to new format
2017-08-18 15:44:02 -04:00
Drashna Jael're
cb76e71109
Add dvorak/colemak layers
2017-08-17 12:38:09 -04:00
0010
8392667ac4
bananasplit LED support and keymap add
...
* added LED pin mapping
* adding my keymap
2017-08-17 12:37:38 -04:00
Dan Amlund Thomsen
4a9e16b394
Add a tetris keymap to clueboard that includes a tetris game
2017-08-17 18:13:21 +02:00
skullY
4e73b0b8d7
Make the bulk of our keyboards match the readme.md standard
2017-08-16 20:36:59 -04:00
Erez Zukerman
2ee0dc7793
Revert "Moves files from ez/keymaps to ergodox/keymaps"
...
This reverts commit 5e36f8463adf9231a60bc8d1c657d51c3181d079.
2017-08-16 20:36:59 -04:00
Erez Zukerman
9298f9d586
Moves files from ez/keymaps to ergodox/keymaps
...
That directory shouldn't even exist
2017-08-16 20:36:59 -04:00
Erez Zukerman
356b489d98
Update ErgoDox readme
...
Per standard recommended in #1362 .
2017-08-16 20:36:59 -04:00
Yu He
4c2dafc652
Add separate readme.md for ErgoDone
2017-08-16 17:31:12 -04:00
Yu He
285099de0d
Add ErgoDone support to two keymaps that have special config.h
2017-08-16 17:31:12 -04:00
Yu He
cb74c8dc46
Add dummy backlight/LED functions for keymaps that require them
2017-08-16 17:31:12 -04:00
Yu He
52f4a38cb3
Add support for the ErgoDone
2017-08-16 17:31:12 -04:00
skullY
89bcdde927
line endings
2017-08-16 12:23:59 -07:00
skullY
0cc15e117d
Cleanup the clueboard keymaps
2017-08-16 01:07:48 -07:00
Balz Guenat
5bff9d6181
cleanup usb-usb converter code
2017-08-15 23:14:41 -04:00
Balz Guenat
7e5ccd50dc
add RESET to keymap
2017-08-15 23:14:41 -04:00
Balz Guenat
80d082055b
convert keymap into qmk-style
2017-08-15 23:14:41 -04:00
Balz Guenat
c8222043fc
wow, it builds! added empty matrix.c and moved custom matrix code to custom_matrix.cpp
...
still untested because of hardware availability :(
2017-08-15 23:14:41 -04:00
Balz Guenat
fa86b10138
add extern "C" to matrix.cpp
2017-08-15 23:14:41 -04:00
Balz Guenat
2aa5e44640
some major steps toward making the usb-usb converter work
2017-08-15 23:14:41 -04:00
Balz Guenat
42f895a4bc
remove unused variables from makefile
2017-08-15 23:14:41 -04:00
Balz Guenat
f4cdc9117c
small changes following Jack's advice.
2017-08-15 23:14:41 -04:00
Balz Guenat
d7d20e2511
start working on usb-usb converter port
2017-08-15 23:14:41 -04:00
Jack Humbert
aee4e4650b
Merge pull request #1576 from That-Canadian/minidox
...
Minidox
2017-08-14 16:21:39 -04:00
drashna
be0d49ba63
Add files via upload
2017-08-14 16:20:24 -04:00
drashna
0f2a7b6210
Fixed so will compile both with and without underglow
2017-08-14 16:20:24 -04:00
drashna
cb7255755b
Add files via upload
2017-08-14 16:20:24 -04:00
drashna
1a0b5aee63
Create Keymap.c
...
RGB Underglow mod for layer indication
2017-08-14 16:20:24 -04:00
That-Canadian
26650731d1
Added "EECONFIG_HANDEDNESS" to the eeconfig.h , because when RGB was enabled it was overwritting the old EECONFIG_HANDEDNESS address (10), so it is now on a non-conflicting addres (14).
...
Updated MiniDox split_util.h and eeprom files to reflect this change.
I recommend adding this to any split board that used these files, my changes will not effect them currently.
2017-08-13 14:24:04 -04:00
Balz Guenat
897ceac26c
add option to let ctrl override shift/gui for the GRAVE_ESC.
...
This enables the ctrl+shift+esc shortcut to task manager on windows.
2017-08-11 16:54:10 -04:00
dwrz
70407a1b67
Add config.h to piemod keymap.
2017-08-10 14:58:15 -04:00
dwrz
3fa32867ad
Remove makefile from Let's Split piemod.
2017-08-10 14:58:15 -04:00
dwrz
72b7067489
Add piemod keymaps for Let's Split and Planck.
2017-08-10 14:58:15 -04:00
Ryan Sullivan
a5ab2412ab
Update readme
...
Fixed link and small cleanup
2017-08-09 21:03:05 -04:00
Ryan Sullivan
78ae28f24c
Add 'boardy' keymap
...
Initial version of my personal layout for my keyboard Boardy
2017-08-09 21:03:05 -04:00
Ryan Sullivan
b6ed990d58
Rename 'base' to 'default'
...
Moves Eagleheardt's base layout to the default one for the Org60. Also changed to use the right header file.
2017-08-09 21:03:05 -04:00
Ryan Sullivan
aa660d61ea
Add Org60 keyboard
...
This makes some small changes to the XD60 configuration. Also moves Eagleheardt's base keymap.
2017-08-09 21:03:05 -04:00
Jasonm23
d2e24354e1
Add TKL keymap for GON NerdTKL
2017-08-09 10:19:39 -04:00
Ethan Madden
6b70b6a990
Readmes!
2017-08-08 23:31:56 -04:00
Ethan Madden
daa5cee065
Added my personal layout
...
added RGB controls to my keymap
2017-08-08 23:31:56 -04:00
Ethan Madden
33a87c132c
Base JC65 config
...
jc65 builds properly, haven't test flashed yet
Enabled RGB backlighting
disabled some other features to save some space
2017-08-08 23:31:56 -04:00
skullY
087d00f769
commit line ending differences
2017-08-08 16:45:44 -07:00
Fredric Silberberg
3815067377
Fixed gaming layer
2017-08-08 10:02:53 -04:00
Fredric Silberberg
e9d755b6f4
Small gaming layer update
2017-08-08 10:02:53 -04:00
Fredric Silberberg
a3e1d9a8cc
Added support for locking One Shot modifiers.
2017-08-08 10:02:53 -04:00
Fredric Silberberg
916c4d799d
Added NKRO to nyquist layout.
2017-08-08 10:02:53 -04:00
Fredric Silberberg
bc59e093ec
Updated ergodox profile
2017-08-08 10:02:53 -04:00
Fredric Silberberg
7935f563e9
Updated nyquist gaming layout.
2017-08-08 10:02:53 -04:00
Fredric Silberberg
8e1be7c792
Initial implementation of the key_lock feature.
2017-08-08 10:02:53 -04:00
Fredric Silberberg
7a9fb7c96b
Added readme, fixed eql vs plus
2017-08-08 10:02:53 -04:00
Fredric Silberberg
8cb413b6b7
Updated licensing
2017-08-08 10:02:53 -04:00
Fredric Silberberg
b66a9af352
Finished initial Nyquist keymap.
2017-08-08 10:02:53 -04:00
Fredric Silberberg
fb91d9008b
Additional keymap updates.
2017-08-08 10:02:53 -04:00
Fredric Silberberg
1219da753b
Initial nyquist keymap
2017-08-08 10:02:53 -04:00
Jack Humbert
107d8031e5
update priyadi's keymap config
2017-08-07 22:36:05 -04:00
Jack Humbert
1a070d6f6f
let planck keymaps use KEYMAP
2017-08-07 22:04:37 -04:00
Balz Guenat
3961e14209
remove duplicate readme
2017-08-07 22:26:32 +02:00
Balz Guenat
d18df8ef7a
Merge remote-tracking branch 'upstream/master' into bananasplit
...
# Conflicts:
# keyboards/bananasplit/Makefile
# keyboards/bananasplit/bananasplit.c
# keyboards/bananasplit/bananasplit.h
# keyboards/bananasplit/config.h
# keyboards/bananasplit/keymaps/default/keymap.c
# keyboards/bananasplit/rules.mk
2017-08-07 21:54:06 +02:00
That-Canadian
5f58a8f842
Line endings issue for uk78?
2017-08-07 09:06:53 -04:00
That-Canadian
4fd5ee410c
Modified gitignore file to allow the left and right hand eeprom files for the MiniDox to be added. They need to be there for proper flashing of the board. They do not change between builds, so no need to re-build them.
2017-08-07 09:06:53 -04:00
That-Canadian
93b850048a
Changed my personal keymap and config.
2017-08-07 09:06:53 -04:00
Nic Aitch
7f3921bcb3
Update nic keymap
2017-08-06 22:46:44 -04:00
Nic Aitch
b529d5923f
Update readme
2017-08-06 22:46:44 -04:00
Nic Aitch
fb0d4e96e8
Add nic keymap
2017-08-06 22:46:44 -04:00
Nic Aitch
c93975ac94
Add "hhkb with arrows" macro
2017-08-06 22:46:44 -04:00
Nic Aitch
ba59b2d97e
Port hhkbanana
2017-08-06 22:46:44 -04:00
Nic Aitch
4a5c948561
Port true_banana as default
2017-08-06 22:46:44 -04:00
Nic Aitch
087fbe0628
Port main keyboard parts
2017-08-06 22:46:44 -04:00
Gareth Pye
1fc9eabd08
Fixed a layout comment to match layout array
2017-08-06 20:08:37 -04:00
Danny Nguyen
7b5f02aa6a
Port updated debouncing algorithm from Let's Split to Nyquist
2017-08-06 20:08:00 -04:00
Danny Nguyen
b20a87e3cc
Add .eep files for setting hands
2017-08-06 20:08:00 -04:00
Danny Nguyen
396f97068b
Add RGB commands to default Nyquist keymap
2017-08-06 20:08:00 -04:00
Rozakiin
5fbd25db62
Update readme.md
2017-08-06 20:06:24 -04:00
Rozakiin
05351ce8b3
Add files via upload
2017-08-06 20:06:24 -04:00
Balz Guenat
308bec28bb
Add language-switch for locking switch
2017-08-04 04:16:39 +02:00
Jack Humbert
76ea366abd
Merge pull request #1538 from That-Canadian/eco-keyboard
...
Eco keyboard
2017-08-03 20:58:23 -04:00
Jack Humbert
5c44d40a0c
Merge pull request #1540 from fabiant7t/master
...
amj40 added; my layouts for Let's Split, amj40 and XD75
2017-08-03 20:57:44 -04:00
Danny Nguyen
479139f9d4
Fix location of where the make command should be run
2017-08-03 20:56:21 -04:00
Danny Nguyen
e0caf94323
Move avrdude flashing script from individual keyboard rules.mk to common location and improve script.
...
Port detection script is now more informative and better handles first time flashing of a Pro Micro
2017-08-03 20:56:21 -04:00
Balz Guenat
d8c503f3ac
add personal keymap
2017-08-03 23:33:31 +02:00
Fabian Topfstedt
088dfb7db5
added a clone of my lets split grid layout on a re75
2017-08-03 21:05:09 +02:00
Fabian Topfstedt
3c2343664c
Merge https://github.com/qmk/qmk_firmware
2017-08-03 19:44:58 +02:00
That-Canadian
8765751f70
Added V2 files for the ECO board, also changed default from rev1 to rev2.
2017-08-03 11:02:52 -04:00
Eagleheardt
b6280f979c
Picture and details update
...
I fixed the picture of the layout and added a bit of an explanation. It now matches the readme file from the uppercase BASE folder
2017-08-02 21:52:31 -04:00
Balz Guenat
15fbe6e233
add the bananasplit keyboard incl. default keymap.
2017-08-03 03:51:34 +02:00
Eagleheardt
7371209ffb
Adds Eagleheardt's XD60 keymap ( #1528 )
...
* Add files via upload
* Update readme.md
* Update readme.md
* Add files via upload
2017-08-02 21:23:36 -04:00
Mark John Garcia Merin
bb30ff5f71
Fix HHKBish layout arrows
2017-08-02 16:05:46 -04:00
MechMerlin
bc5c67b3b2
Change TG to TO
2017-08-02 16:05:46 -04:00
MechMerlin
ea02a3ea23
Update keymap to have HHKB-ish support and readme along with it
2017-08-02 16:05:46 -04:00
MechMerlin
29fcb64bb4
add KC_Grave and fix typo on readme
2017-08-02 16:05:46 -04:00
MechMerlin
70cc193d14
Add a readme.md file for the keymap
2017-08-02 16:05:46 -04:00
MechMerlin
aab5f349a2
New keymap for mechmerlin
2017-08-02 16:05:46 -04:00
Balz Guenat
a7b6292010
added missing media controls and mod-tap rshift/enter
2017-08-02 16:05:22 -04:00
Balz Guenat
8e66f65c77
add my keymap
2017-08-02 16:05:22 -04:00
xk
23549791eb
Add keymap xk
2017-08-02 16:04:49 -04:00
Zeal Jagannatha
dd3803f334
Normalize all line endings
2017-08-01 16:44:29 -04:00
Fabian Topfstedt
015bf30d9b
changed adjust layer to emulate mouse on rignt hand
2017-07-31 22:01:35 +02:00
Fabian Topfstedt
9609a47c3e
Merge https://github.com/qmk/qmk_firmware
2017-07-31 21:17:16 +02:00
Fabian Topfstedt
661106bac4
layout updates and cleanups
2017-07-31 21:16:55 +02:00
Jack Humbert
bd0a888133
line-endings
2017-07-30 12:59:18 -04:00
Benjamin Kesselring
d272111d46
added xd75 to list in /keyboards
2017-07-30 00:46:08 -04:00
Benjamin Kesselring
0b528d2e36
updated readme and tweaked keymap
2017-07-30 00:46:08 -04:00
Benjamin Kesselring
cc6043ca29
add backlight support (probably)
2017-07-30 00:46:08 -04:00
Benjamin Kesselring
fffc5237a7
fix RGB
2017-07-30 00:46:08 -04:00
Benjamin Kesselring
992a63c0f2
add xd75, preliminary RGB'
2017-07-30 00:46:08 -04:00
Kototama
25659acb1c
Add an Ergodox Colemak Mod-DH keymap for french layouts
...
[Colemak Mod-DH](https://colemakmods.github.io/mod-dh/ ) layout for
users keeping an `azerty` layout configuration on their OS.
The symbols layers was done after analysing various programming
languages sources codes and should be close to optimal for typing
confort.
2017-07-29 11:38:36 -04:00
ahtn
07cb997b6d
Changes lets_split to use timer based debouncing
...
The let's split code used delays in its debouncing algorithm which
increases input latency. This commit copies and adapts the code from
`quantum/matrix.c` to lets_split's `matrix.c`.
2017-07-29 11:38:00 -04:00
unknown
ac634aa455
Fixed error in readme
2017-07-28 23:41:53 -04:00
unknown
6b2a3492b7
Removed un-needed protosplit directory and updated readme
2017-07-28 10:45:34 -04:00
unknown
dcd64062d2
Reverted changes
2017-07-28 10:45:34 -04:00
unknown
4148aeee19
Figured out that I didn't need to include both keymaps in both files
2017-07-28 10:45:34 -04:00
unknown
1f78b62cd6
Hopefully compile issues are gone, and updated files
2017-07-28 10:45:34 -04:00
unknown
9f82d14eb9
Fixed all things jack suggested.
2017-07-28 10:45:34 -04:00
unknown
b710e21efb
Added to blank spaces at end of protosplit to make it compile under make v2
2017-07-28 10:45:34 -04:00
unknown
9334986bd9
Updated readme to show compile rules that won't throw an error
2017-07-28 10:45:34 -04:00
unknown
f2824bca02
Fixed typo in my layout and updated
2017-07-28 10:45:34 -04:00
unknown
5023f55856
Fixed some capitalization issues
2017-07-28 10:45:34 -04:00
unknown
6d15f5a5b7
Another typo fix
2017-07-28 10:45:34 -04:00
unknown
ea1fd96c84
Fixed typo in my layout
2017-07-28 10:45:34 -04:00
unknown
1eea91f5f8
Updated my makefile..again
2017-07-28 10:45:34 -04:00
unknown
9546b180b9
Updated my makefile
2017-07-28 10:45:34 -04:00
unknown
2265e4ce41
Removed old keymaps
2017-07-28 10:45:34 -04:00
unknown
cbc5a08c40
Removed old protosplit folder
2017-07-28 10:45:34 -04:00
unknown
78f79ca6cc
Removed old folder
2017-07-28 10:45:34 -04:00
Donald
f1dbf72e09
Changed case of protosplit
...
Also updated readme to have correct capitalization.
2017-07-28 10:45:34 -04:00
Donald
c71b60c82a
Changed case of deltasplit75 to be lowercase.
...
To follow convention.
2017-07-28 10:45:34 -04:00
unknown
47c6d201aa
Add my layout
2017-07-28 10:45:34 -04:00
xyxjj
f6438e42af
Add files via upload
2017-07-28 10:45:34 -04:00
xyxjj
be1876aa76
Add files via upload
2017-07-28 10:45:34 -04:00
xyxjj
d3b6552fb7
Delete MX RIGHT B.dxf
2017-07-28 10:45:34 -04:00
xyxjj
ce3ea49743
Delete ALPS+MX RIGHT B.dxf
2017-07-28 10:45:34 -04:00
xyxjj
811c583636
Delete ALPS RIGHT B.dxf
2017-07-28 10:45:34 -04:00
xyxjj
173d1b7571
Delete middle layers - RIGHT B.dxf
2017-07-28 10:45:34 -04:00
xyxjj
98f977e95c
Delete bottom layers - RIGHT B.dxf
2017-07-28 10:45:34 -04:00
xyxjj
1832b59266
Delete MX LEFT B.dxf
2017-07-28 10:45:34 -04:00
xyxjj
1bfe5b5723
Delete ALPS+MX LEFT B.dxf
2017-07-28 10:45:34 -04:00
xyxjj
038c12d59a
Delete ALPS LEFT B.dxf
2017-07-28 10:45:34 -04:00
xyxjj
3d23a80c83
Delete Middle layers - LEFT B.dxf
2017-07-28 10:45:34 -04:00
xyxjj
f56884b253
Delete Bottom Layer - LEFT B.dxf
2017-07-28 10:45:34 -04:00
xyxjj
d4e695a136
Delete top bezel - blocked corner.dxf
2017-07-28 10:45:34 -04:00
xyxjj
2013f4fb83
Delete top bezel - Winkeyless.dxf
2017-07-28 10:45:34 -04:00
xyxjj
508cc7e56b
Delete top bezel - Standard.dxf
2017-07-28 10:45:34 -04:00
xyxjj
8958a4f78b
Delete PCB Dimesnsion.dxf
2017-07-28 10:45:34 -04:00
xyxjj
429971997c
Delete MX RIGHT B.dwg
2017-07-28 10:45:34 -04:00
xyxjj
e898a8ecc8
Delete ALPS+MX RIGHT B.dwg
2017-07-28 10:45:34 -04:00
xyxjj
b6e8516d6d
Delete ALPS RIGHT B.dwg
2017-07-28 10:45:34 -04:00
xyxjj
2077226fc2
Delete middle layers - RIGHT B.dwg
2017-07-28 10:45:34 -04:00
xyxjj
cfafa97227
Delete bottom layers - RIGHT B.dwg
2017-07-28 10:45:34 -04:00
xyxjj
3d73110795
Delete readme.md
2017-07-28 10:45:34 -04:00
xyxjj
727707ef0b
Delete PCB Dimesnsion.dwg
2017-07-28 10:45:34 -04:00
xyxjj
2a3af90d9f
Delete MX LEFT B.dwg
2017-07-28 10:45:34 -04:00
xyxjj
73e5a7fafe
Delete ALPS+MX LEFT B.dwg
2017-07-28 10:45:34 -04:00
xyxjj
eceb2a4810
Delete ALPS LEFT B.dwg
2017-07-28 10:45:34 -04:00
xyxjj
b34dfeecdf
Delete Middle layers - LEFT B.dwg
2017-07-28 10:45:34 -04:00
xyxjj
01458037de
Delete Bottom Layer - LEFT B.dwg
2017-07-28 10:45:34 -04:00
xyxjj
461f95ce0b
Update readme.md
2017-07-28 10:45:34 -04:00
xyxjj
f4bc404aa2
Delete top bezel - blocked corner.dwg
2017-07-28 10:45:34 -04:00
xyxjj
b70e68ac5b
Delete top bezel - Winkeyless.dwg
2017-07-28 10:45:34 -04:00
xyxjj
e4d849ed95
Delete top bezel - Standard.dwg
2017-07-28 10:45:34 -04:00
xyxjj
4f193d6dc2
Add files via upload
2017-07-28 10:45:34 -04:00
xyxjj
934d35ea3f
Add files via upload
2017-07-28 10:45:34 -04:00
xyxjj
a76a607a2b
Add files via upload
2017-07-28 10:45:34 -04:00
xyxjj
9aec284f42
Update
2017-07-28 10:45:34 -04:00
xyxjj
3a0f7865da
Update readme.md
2017-07-28 10:45:34 -04:00
xyxjj
b11d770bea
Update Makefile
2017-07-28 10:45:34 -04:00
xyxjj
5a63aa29a9
Update readme.md
2017-07-28 10:45:34 -04:00
xyxjj
ab63ff8d2e
Update readme.md
2017-07-28 10:45:34 -04:00
xyxjj
00e4079d5a
Delete top bezel - blocked corner.bak
2017-07-28 10:45:34 -04:00
xyxjj
4d88634f07
Delete top bezel - Standard.bak
2017-07-28 10:45:34 -04:00
xyxjj
5ea3b1ea4d
Delete PCB Dimesnsion.dwl2
2017-07-28 10:45:34 -04:00
xyxjj
c497a19e7b
Delete PCB Dimesnsion.dwl
2017-07-28 10:45:34 -04:00
xyxjj
7e07bdbde3
Add files via upload
2017-07-28 10:45:34 -04:00
xyxjj
60e5277a8f
Delete PCB Dimesnsion.dwg
2017-07-28 10:45:34 -04:00
xyxjj
96ec98b1ad
Create readme.md
2017-07-28 10:45:34 -04:00
xyxjj
7a31ef8284
Add files via upload
2017-07-28 10:45:34 -04:00
xyxjj
0c2b0c7cc1
Update readme.md
2017-07-28 10:45:34 -04:00
xyxjj
42ea9460fe
Update readme.md
2017-07-28 10:45:34 -04:00
xyxjj
e9daf0606f
Update readme.md
2017-07-28 10:45:34 -04:00
xyxjj
be2c7aac31
Add files via upload
2017-07-28 10:45:34 -04:00
Joe Wasson
f30f12ec81
Add support for GeminiPR steno protocol.
...
This protocol breaks out "duplicate" keys into their own entry in the packet so that more complicated logic can be done on the software side, including support for additional languages and alternative theories.
2017-07-27 16:10:36 -04:00
Joe Wasson
5987f67989
Add TX Bolt protocol support for Stenography
...
Requires virtser; Allows QMK to speak the TX BOlt protocol used by stenography machines and software (such as Plover). The upside is that Plover can be configured to listen only to TX Bolt allow the keyboard to switch layers without need to enable/disable the Plover software, or to have a second non-Steno keyboard work concurrently.
2017-07-27 16:10:36 -04:00
Fabian Topfstedt
20b3ac49b7
deleted file
2017-07-26 12:48:13 +02:00
Fabian Topfstedt
619081559b
added my amj40 custom layout
2017-07-26 12:47:40 +02:00
Fabian Topfstedt
4a1f701d9f
included amj40 implementation of nhou7 from https://github.com/nhou7/qmk_firmware_amj40
2017-07-26 12:46:04 +02:00
Fabian Topfstedt
de9331c50c
custom makefile
2017-07-26 12:19:13 +02:00
Fabian Topfstedt
3b05183deb
symmetric modifiers in bottom row
2017-07-26 12:18:40 +02:00
Fabian Topfstedt
75677655ad
left shift is backspace on tap
2017-07-26 11:11:13 +02:00
Fabian Topfstedt
c7ea65c6d3
default based customizations
2017-07-26 11:09:29 +02:00
Fabian Topfstedt
4ee571b257
Merge https://github.com/qmk/qmk_firmware
2017-07-25 09:48:58 +02:00
07dcbd23fd
First Update
2017-07-24 15:19:31 -04:00
Jack Humbert
415d38ba9e
adds music mode, music mode songs, music mask
2017-07-23 14:59:29 -04:00
Jack Humbert
f407f3e8de
remove unneccesary headers
2017-07-23 14:59:29 -04:00
Jack Humbert
f40ded7894
relocate keymap's useful tools
2017-07-23 14:59:29 -04:00
Jack Humbert
6a3c66776c
clean-up planck and preonic keymaps, move audio stuff around
2017-07-23 14:59:29 -04:00
Jack Humbert
8edb67b082
fix line-endings
2017-07-21 19:05:13 -04:00
rootuseralpha
e26283e9e5
Update keymap.c
2017-07-20 21:52:13 -04:00
rootuseralpha
8deb405292
Add files via upload
2017-07-20 21:52:13 -04:00
rootuseralpha
4d665a99ae
Add files via upload
2017-07-20 21:52:13 -04:00
rootuseralpha
4627cab49d
Delete test
2017-07-20 21:52:13 -04:00
rootuseralpha
e5f606558e
Add files via upload
2017-07-20 21:52:13 -04:00
rootuseralpha
f379f05c1e
Create test
2017-07-20 21:52:13 -04:00
Maarten Dekkers
1524d29cfb
Added some user customization
2017-07-20 10:18:00 -04:00
Maarten Dekkers
30efce5584
Changes to own keymap
2017-07-20 10:18:00 -04:00
Fabian Topfstedt
ee43856ff7
Merge https://github.com/qmk/qmk_firmware
2017-07-20 08:22:44 +02:00
That-Canadian
b6d74b9bb9
Fixed typo in readme
2017-07-14 21:58:59 -04:00
That-Canadian
5e8594db82
Updated MiniDox readme
2017-07-14 21:57:41 -04:00
That-Canadian
6c9b69a4b6
Merge branch 'master' into minidox
2017-07-14 21:35:50 -04:00
That-Canadian
e2e0f5d6d1
Merge branch 'minidox' of https://github.com/That-Canadian/qmk_firmware into minidox
2017-07-14 21:33:19 -04:00
That-Canadian
21b63d9243
Updated i2c and serial files to most recent from the lets split firmware. Also updated that_canadian keymap
2017-07-14 21:24:58 -04:00
ishtob
087af43dee
fix implementation issues from SSD1306 clean up, added rotation ( #1494 )
...
* moved OLED update task to keymap
* fix splitting render display to keymap
* Added rotation option for OLED, fixed splitting display render update to keymap
* issues with attribute
2017-07-12 12:10:28 -04:00
Jack Humbert
cc468523df
clean up ssd1306 implementation
2017-07-11 14:23:26 -04:00
ishtob
cc6db9c540
Adds Hadron Keyboard ( #1492 )
...
* adding hadron keymaps
* fix embedded comment
* fixed TWI driver path
* Delete glcdfont.c
* Delete ssd1306.c
* Delete ssd1306.h
* Update readme.md
2017-07-11 13:53:50 -04:00
Maarten Dekkers
886af32507
Updates maartenwut's keymap ( #1489 )
...
* Updated keymap
* Added backlight breathing to fix compile error
2017-07-11 12:53:41 -04:00
That-Canadian
55fcac4639
Adds Minidox Keyboard ( #1487 )
...
* merge
* line ending stuff
* Added MiniDox keyboard folder / configs / and some keymaps
* Updated minidox rev1 config, and readme. Also updated that_canadian keymap to include RGB
* cleaned up that_canadian keymap comments
* Fixed RGB being enabled by default, now it must be turned on at the keymap level
2017-07-10 20:15:08 -04:00
That-Canadian
a4958a532d
Fixed RGB being enabled by default, now it must be turned on at the keymap level
2017-07-10 17:12:18 -04:00
That-Canadian
df50260300
cleaned up that_canadian keymap comments
2017-07-10 16:59:20 -04:00
That-Canadian
55ed97af1e
Merge branch 'master' into minidox
2017-07-10 16:53:49 -04:00
That-Canadian
1fdf3c84fe
Updated minidox rev1 config, and readme. Also updated that_canadian keymap to include RGB
2017-07-10 16:51:37 -04:00
Jack Humbert
65c10790d4
Update README.md
2017-07-10 11:53:18 -04:00
Jack Humbert
42d5a324eb
Start mvoing hardware drivers to /drivers/ ( #1433 )
...
* start driver isolation
* update nyquist and orthodox boards
* update atreus62
* move drivers to avr
* update avr conditional
2017-07-10 11:18:47 -04:00
Fred Sundvik
190b90892b
Rename board files to lowercase
2017-07-10 09:01:59 -04:00
Fred Sundvik
9d8279960d
Make it easier to use drivers
2017-07-10 09:01:59 -04:00
Fred Sundvik
4da3b19603
Shared default animations
2017-07-10 09:01:59 -04:00
Fred Sundvik
2251560256
Clarify naming between LCD_BACKLIGHT and LED_BACKLIGHT
2017-07-10 09:01:59 -04:00
Fred Sundvik
f3c113fb5a
Shared gfxconf
2017-07-10 09:01:59 -04:00
Fred Sundvik
8a962f7b27
Define visualizer thread priority by default
2017-07-10 09:01:59 -04:00
Fred Sundvik
011ee29441
Fixup mixed tabs/spaces
2017-07-10 09:01:59 -04:00
Fred Sundvik
630f065376
Remove ergodox from gdisp driver names
2017-07-10 09:01:59 -04:00
Fred Sundvik
aca0f4dcae
Move GDISP drivers to /drivers/ugfx
2017-07-10 09:01:59 -04:00
That-Canadian
9312b9db6c
Added MiniDox keyboard folder / configs / and some keymaps
2017-07-10 00:46:19 -04:00
Jack Humbert
9de443cbf1
Merge pull request #1471 from qmk/lufa_lib
...
Update LUFA and move it to /lib/lufa
2017-07-07 15:33:29 -04:00
Maarten Dekkers
88b3d051b2
Corrected it again.
2017-07-07 15:33:09 -04:00
Maarten Dekkers
53acc7b074
Cleaned and corrected keymap code
2017-07-07 15:33:09 -04:00
Maarten Dekkers
68cf0d454c
Own keymap layout
2017-07-07 15:33:09 -04:00
Ethan Spitz
53174036e9
Add new keymap to try to get pretty close to the default layout for an ergodox keyboard. Coming from that I really like being able to use the backspace from my left thumb.
2017-07-07 15:13:18 -04:00
Jack Humbert
1c26468ad5
update include
2017-07-07 14:53:47 -04:00
Jack Humbert
7bddacf25f
update lets_split lufa include
2017-07-07 13:32:29 -04:00
Maarten Dekkers
58139f87e4
Fixed arrow up and rgb config
2017-07-05 11:48:19 -04:00
Maarten Dekkers
684c381aee
Moved RGB features to new layout
2017-07-05 11:48:19 -04:00
Maarten Dekkers
c6d544bbb0
Fixed image description
2017-07-05 11:48:19 -04:00
Maarten Dekkers
7f82275a4d
Added support for RGB on the Tada68
2017-07-05 11:48:19 -04:00
Andreas Lindhé
b228cf7ba4
Update readme
2017-07-05 10:56:53 -04:00
Andreas Lindhé
41b23af60e
Create custom layout based on swedish
...
This is a setup that is very useful for me. It may or may not be for
you. I will use it in conjunction with the A5 overlayed sv_SE layout.
The layout is subject to change (in particular I'm thinking about adding
a macro recording feature), but it have not changed much the past year
or two so you can expect it to be stable enough to learn it.
A5: http://aoeu.info/s/dvorak/svorak
My xkb map: https://github.com/lindhe/dotfiles/blob/master/usr/share/X11/xkb/symbols/se-A5
The most major points:
======================
L0:
---
* Easily accessible F11 key for fullscreening
* Print screen
* Middle mouse button for X-paste
* Improved reachability of meta buttons (LCtrl, LALt, AltGr, LGui etc.)
* Cluster Page Up/Down + Home/End by the right thumb
* Vim-like arrow layout in right bottom row
* Set media layer toggle to right thumb (Enter)
* Set apostrophe on LCtl (putting it next to some other small
characters)
L1:
---
* Full function key layout
* Teensy button
L2:
---
* Improved media buttons layout (close by the jkl; Vim binding)
* Improved layout of emulated mouse buttons
LED behaviour to binary+CAPS
============================
The ErgoDox LEDs on this layout is using the two rightmost LEDs as the
two LSB in a two digit binary number, representing layer 0, 1, 2 and 3.
The leftmost byte/LED indicates CAPS status.
2017-07-05 10:56:53 -04:00
Shayne Holmes
48ff93582b
Pull out sendstring variations to their own files.
...
Instead of having all sendstring keycode mappings in the main quantum.c
file, give each one its own file in keymap_extras that can be #included
in a user's keymap. If one is included, it will define the appropriate
lookup tables and overwrite the weak definitions in quantum.c.
(Including more than one sendstring definition will fail at compile
time.)
Update @rai-suta's test keymap to match, as well as the documentation.
2017-07-05 10:55:47 -04:00
Shayne Holmes
fdc2e8058b
Allow broader send_string layout customizability via compile flag
...
Refactor new-ish JIS_KEYCODE send_string implementation with existing
send_string
Reshuffle JIS in line with other alternative keycodes for sendstring,
and make them all accessible via compile-time options
Add a separate function to allow sending a string with a delay.
2017-07-05 10:55:47 -04:00
dbroqua
c41d40c422
- Fixed wording in readme
2017-07-05 09:59:37 -04:00
dbroqua
d638547cd0
- Updated dk60 readme with new QMK rules
2017-07-05 09:59:37 -04:00
dbroqua
4587bb8786
- Fixed DK60 version in config.h
2017-07-05 09:59:37 -04:00
skullydazed
60eb2e140d
Update the clueboard readmes ( #1459 )
2017-07-05 00:15:09 -07:00
That-Canadian
b3d2f05032
Changed - to _ for keymap that-canadian for compatability reasons.
2017-07-04 16:43:19 -04:00
That-Canadian
2cf97c6d90
Updated ECO files to follow proper formatting. Also updated that-canadian keymap to take out extraneous characters.
2017-07-04 16:43:19 -04:00
That-Canadian
f7b8148c12
Updated ECO readme file, includes picture of ECO now.
2017-07-04 16:43:19 -04:00
That-Canadian
dbcf0ba6ca
Added ECO keyboard folder and configuration files. Also added my (That-Canadian) keymap folder and files.
2017-07-04 16:43:19 -04:00
Callum Oakley
84a8aabe5b
MORE layer
2017-07-04 18:16:45 +01:00
Luiz Ribeiro
d5486265b8
Merge branch 'master' into ps2avrGB
2017-07-04 11:17:28 -04:00
Luiz Ribeiro
738b072bb0
Fixed indentation and now using quantum keycodes for rgblight
2017-07-04 11:12:42 -04:00
Martin Gondermann
34c8bf47a7
Move Space Caded Parentheses to own layer ( #1452 )
...
* Move Space Caded Parentheses to own layer
The space cadet parentheses where too much distracting. Therefore they are now on the function layer. I also added two more layers for also having angle brackets and curly braces on the shift keys forr better access.
Also updated the README
* Fixed SHIFT+Function key conflict
* Removed Angle Bracket and Curly Bracket layers, as they don't work corrrectly
2017-07-03 11:48:48 -07:00
Kyle Terry
062b3547ed
Keyboards/handwired magicforce61 ( #1454 )
...
* adding the magicforce61 under handwired
* I meant 14 cols
2017-07-03 11:47:48 -07:00
Martin Gondermann
827dc6c715
Add octave lights for midi layer ( #1457 )
2017-07-03 11:43:32 -07:00
Jack Humbert
b7afa59c97
remove warning
2017-06-30 16:33:49 -04:00
Jack Humbert
753809eed7
adds debouncing to sixkeyboard
2017-06-30 16:33:49 -04:00
Jack Humbert
b476d65b9c
Update keyboards' rules.mk/Makefiles ( #1442 )
...
this may change some of the keyboards' default settings - if you experience anything odd, please check back to this commit
2017-06-30 16:09:52 -04:00
Jack Humbert
61ef949576
update some copyright headers
2017-06-28 12:58:58 -04:00
Jack Humbert
56634ca065
cleanup nyquist
2017-06-28 10:42:23 -04:00
Jack Humbert
663d3906ec
cleanup orthodox
2017-06-28 10:42:23 -04:00
Jack Humbert
f5f7dfa064
cleanup lets_split
2017-06-28 10:42:23 -04:00
Jack Humbert
7d28a417c0
don't let timer1 exist without b5 being enabled
2017-06-27 15:28:13 -04:00
Jack Humbert
ea7590c894
add new arguements, docs
2017-06-27 14:35:08 -04:00
Fabian Topfstedt
99b6e918ea
fixed brackets
2017-06-27 16:20:17 +02:00
Andreas Lindhé
a25dbaad32
Create sv_SE Qwerty layout for ErgoDox
...
*NOTE:* it might still be desirable to set the software layout to sv_SE in your
OS.
Swedish (sv_SE) Qwerty layout for ErgoDox, based on the Default configuration
I have tried making this as close of a match I could between the [default
ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware ) and a
standard Swedish Qwerty layout.
Notable differences from default:
=================================
* There are three special character buttons (acute accent, circumflex/tilde and
apostrophe/asterisk) that don't have any buttons to map to naturally. I've put
these at other places:
* Acute accent (´) can be found in the lower left corner, conveniently
placed to reach for making an é.
* Apostrophe (') was put in the lower left corner, close to acute accent.
* Circumflex (^) and asterisk (*) was placed in the lower right corner.
* Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left
those out. I could only get the buttons to produce a single one of the
characters. How can I get it to work properly?
* The Alt button on right thumb was exchanged for AltGr (RAlt).
* I changed the backslash in the numpad (layer 1) for a minus. Thought it was
more sensible.
* I didn't find a good place for the "<>|" button, so that one was left out.
That is a problem that really needs to be resolved. Pipe can be found on layer
one, however.
2017-06-27 15:17:21 +02:00
Fabian Topfstedt
9aa748df2a
my layout
2017-06-27 10:36:00 +02:00
Fabian Topfstedt
7d0a471051
removed wrong readme
2017-06-27 09:18:05 +02:00
Fabian Topfstedt
786eb4e73d
my layout
2017-06-27 09:14:04 +02:00
Fabian Topfstedt
4c71b329a2
clone smt layout
2017-06-26 22:33:14 +02:00
Jack Humbert
d1fb8d2296
Merge pull request #1431 from rai-suta/master
...
Bugg fix and add keymap for testing JIS_KEYCODE switch.
2017-06-25 21:31:10 -04:00
Ethan Madden
42e6ecc36b
Whitefox LED control ( #1432 )
...
* use new grave_esc functionality
* Port LED control from Ergodox Infinity to Whitefox
2017-06-25 21:30:40 -04:00
Art Ortenburger
43579a80a7
add support for Orthodox keyboard ( #1436 )
...
* Added orthodox
* Modified readme
* Modified readme
* Modified readme
* Updated makefile
* Fixed keymap issues
* Modified serial communications to allow for over 8 columns
* Fixed sizeof command
* Fixed some typing issues
* Testing issue #1191 (n-column split i2c slave)
Based on initial OrthoDox (serial) config by @reddragond and others,
this attempts to add TWI (I2C) support.
Relevant: <https://github.com/qmk/qmk_firmware/issues/1191 >
- per @ahtn recommendation, using memcpy for moving slave matrix
into slave sending buffer
- slave buffer has been enlarged using sizeof(matrix_row_t)
- note: i2c.h now includes matrix.h
- note: matrix.c includes <string.h>
* Added i2c keymap - right col still not working
* orthodox: re-added i2c keymap, based on serial
* orthodox / issue #1191 : trying 9-bit serial
- orthodox serial protocol now sends 9 bits per row, instead of 16.
Technically it's using MATRIX_COLS, so it might work generically.
- ROW_MASK is #defined in serial.c to truncate the checksums to prevent
overflows causing false errors. This macro should be renamed if it's
kept.
* Revert "Fixed sizeof command"
This reverts commit f62a5b9939d6a9c0e442ec403de00c14431a55f9.
Changes had been made to the lets_split serial driver for testing which
mirrored the multi-byte-row changes made to support the orthodox. As the
lets_split does not require these changes, and new improvements had
been added to the orthodox port only, this commit reverts them.
Because the new code could potentially reduce latency over the serial
transport, it may be desirable to re-add in the future, by backporting
the current working orthodox code.
* orthodox: default serial keymap improvements
- formatting has been improved
- a few keys have been shifted, mainly in Raise and Lower layers,
to be more like the default Planck layout
- Now available: F12, Home, End, PgUp, PgDn, Media-Next, Media-Play
Still To Do:
- duplicate for TWI
- Alt modifier
- GUI modifier
* orthodox: failed attempt at 16b/row TWI
- duplicated updated serial keymap for "i2c"
- removed string.h/memcpy, instead
- hardcoded copying of six bytes per update
- still doesn't work; master reports interconnect errors on txled
* orthodox: adjusted default keymap
- this is applied to both 'serial' and 'i2c' keymaps
- Alt and GUI have been added, as they were missing
- comma and period persist across more layers; Home/PgUp and End/PgDn
have been moved slightly to accommodate
* orthodox: revert TWI support to minimum to debug
- disabled ssd1306 and hardware locking in build configuration
- increased TWI buffer from 0x10 to 0x20 bytes
- decreased TWI clock from 400000 to 100000
- removed hardcoded TWI multi-byte sending/receiving
An 'i2c' build of this was found to work on a rev1 Orthodox, although
slave-side col9 was understandably not working. When testing-time
permits, features will be gradually re-enabled towards getting the full
matrix supported over TWI.
* orthodox: TWI (i2c) is working, kludge for col9
The TWI interconnect ("i2c" in directories and build config) is now
working for the Orthodox, including the slave half's column #9 .
This is intended as an interim solution, as it's a kludge, not a fix.
Rather than a working multi-byte implementation, the two col9 keys'
bits are packed-into and unpacked-from the two unused bits in row1.
Furthermore, the TWI clock constant has been reduced to 100000 from
400000, as testing revealed the higher value just didn't work.
Testing also found that (with this kludge) increasing the TWI buffer
was not necessary.
This commit leaves many commented-out lines in matrix.c from previous
testing, which will be removed in a future commit once the
interconnects' multi-byte problems have been debugged more thoroughly.
* orthodox: updated readme.md
The readme for the Orthodox now includes a description of the keyboard,
allusions to its author and availability, a linked photo, and links to
the evolving build guide and the current keymap on KLE.
This update has been prepared with /u/Deductivemonkee's assistance.
2017-06-25 21:30:07 -04:00
Jack Humbert
1a4a66fd01
updates olkb readmes #1362
2017-06-25 12:40:25 -04:00
rai-suta
3a2ae6a213
Add a keymap for testing JIS_KEYCODE.
2017-06-26 00:37:46 +09:00
Jack Humbert
169ede0715
Merge pull request #1427 from blakedietz/master
...
Add keymaps for ergodox ez, hhkb and jd45 under user blakedietz
2017-06-25 10:29:24 -04:00
Jack Humbert
de833659ae
Merge pull request #1429 from fredizzimo/fixes_for_emulator
...
Minor fixes to support the emulator
2017-06-25 10:29:00 -04:00
Blake Dietz
daf16535f1
Add keymaps for ergodox ez, hhkb and jd45 under user blakedietz
2017-06-24 22:46:07 -06:00
skullY
62c77e7dbf
Remove the DIODE_DIRECTION defines from lets_split so we can close #1067
2017-06-24 17:08:43 -07:00
Dario Giovannetti
30ab4dd14f
Fix typo
2017-06-24 16:32:10 +08:00
Jack Humbert
dfa6417ae3
Merge pull request #1422 from nstickney/master
...
update ErgoDox "Familiar" layout
2017-06-23 21:48:17 -04:00
Jack Humbert
1524c2cb16
Merge pull request #1418 from npoirey/master
...
Frenchdev v1
2017-06-23 18:05:33 -04:00
npoirey
8ad12b1eb7
Updated frenchdev readme
2017-06-23 23:59:30 +02:00
Fred Sundvik
f912c74fe7
Change inline to static inline
2017-06-24 00:34:16 +03:00
Fred Sundvik
574ca7f59c
Delete emulator drivers
2017-06-24 00:34:16 +03:00
Stick
e43e58aad1
updated README.md
2017-06-23 16:28:06 -05:00
Stick
f4e4d6f8d0
Merge remote-tracking branch 'upstream/master'
2017-06-23 16:02:44 -05:00
Stick
37987837b1
added media keys; many bug fixes
2017-06-23 16:02:01 -05:00
npoirey
a3f151b8e9
Refactoring frenchdev
2017-06-23 21:35:33 +02:00
npoirey
de80e2c756
Moved frenchdev to handwired
2017-06-23 21:25:46 +02:00
Jack Humbert
a1ce43781a
Merge pull request #1421 from 333fred/update-layout
...
Update my layout
2017-06-23 14:43:51 -04:00
Fredric Silberberg
6794495336
Doc updates
2017-06-23 11:36:14 -07:00
Fredric Silberberg
2b26abf9a9
Copy/paste additions.
2017-06-23 11:24:55 -07:00
Fredric Silberberg
946f4854c5
Added backlight control keys
2017-06-23 11:07:28 -07:00
Fredric Silberberg
a2fbd671ad
Added a few more VS macros and another ctrl
2017-06-23 11:07:28 -07:00
Fredric Silberberg
7389beb18c
Small keymap layout updates
2017-06-23 11:07:28 -07:00
Mathias Andersson
dd9b00543b
Update Phantom readme
...
Added basic description of the keyboard and some build and configuration
instructions.
Also moved the RGB underlight modification instructions to the readme.
2017-06-23 12:07:18 +02:00
Mathias Andersson
7ca335cf5b
Adjust Phantom for standard PCB
...
The previous default configuration and keymap was made for a Phantom
modified with RGB underlight.
This commit makes the default more in line with the "official"
configurations provided by the PCB.
The previous default have been moved to a separate keymap named
`rgbmod`. It has also been updated to better match the template keymap.
2017-06-23 12:07:18 +02:00
Mathias Andersson
3522496f24
Update Phantom config to better match template
2017-06-23 12:07:18 +02:00
Mathias Andersson
67b8bf8f70
Move Phantom LED handling to phantom.c
...
This is more in line with the structure provided by the keyboard
template.
2017-06-23 12:07:18 +02:00
Stick
98373f2fc1
added tapdance locking
2017-06-22 22:22:43 -05:00
npoirey
a012c24225
Removed image from git and added references to imgur album for Frenchdev keyboard.
2017-06-22 22:19:50 +02:00
Stick
fa96d64f37
Merge remote-tracking branch 'upstream/master'
2017-06-22 13:06:30 -05:00
Jack Humbert
c21c2cc92b
Merge pull request #1416 from geofflane/feature/s65_x_std_grv_esc
...
Use the new Quantum KC_GESC instead of custom code
2017-06-22 12:38:45 -04:00
Erez Zukerman
fe9556104b
Merge pull request #1331 from ariasuni/master
...
Fix undefined reference errors with avr-gcc 7.1
2017-06-22 08:40:59 -04:00
npoirey
0fb835c54c
Fix warning in frenchdev
2017-06-22 10:47:44 +02:00
npoirey
23b0fc20e3
Frenchdev v1
2017-06-22 10:34:23 +02:00
Geoff Lane
8705ac408d
Use the new Quantum KC_GESC instead of custom code
2017-06-21 09:37:20 -04:00
Jack Humbert
9019d65b3c
Merge pull request #1414 from dvdizon/kbd75
...
KBD75 - Initial KBD75 port from qmkeyboard.cn source files
2017-06-20 09:19:48 -04:00
Jack Humbert
2c171b3e5f
Merge pull request #1413 from lasko/master
...
This is a complete redo of my keymap. It includes several
2017-06-20 09:18:02 -04:00
David Dizon
e71b3c6572
KBD75 - Initial KBD75 port from qmkeyboard.cn source files
2017-06-19 22:59:17 -07:00
Jon Nall
f169c715eb
Added custom keymap and enabled Space Cadet
2017-06-19 22:44:42 -07:00
Brandon Height
2ffcf47793
This is a complete redo of my keymap. It includes several
...
layers including qwerty, colemak, navigation, and gui layers.
I also was playing around with dancing tap keys.
2017-06-19 20:12:30 -07:00
Jon Nall
7ce056cad7
Fixed offset for knight rgb mode
2017-06-19 19:51:37 -07:00
Kaleb Elwert
f71c990215
tv44: Add core layout based on the Core 47
2017-06-18 22:44:52 -07:00
Jack Humbert
517f75d893
Merge pull request #1349 from jpetermans/infinity60
...
Infinity60 backlight support
2017-06-18 12:38:38 -04:00
Jack Humbert
dd73e14c9b
Merge pull request #1407 from take-a-CHANCE/master
...
Adding a planck keymap
2017-06-18 12:35:08 -04:00
Jack Humbert
66e2d6a063
Merge pull request #1406 from jprMesh/atreus52
...
Atreus52
2017-06-18 12:34:33 -04:00
Jack Humbert
f2e1609801
remove hardware files, move arrow pad
2017-06-18 12:33:14 -04:00
Jack Humbert
5682254f71
Merge pull request #1408 from fredizzimo/fix_build_improve_travis
...
Fix the two failing keymaps and improve the travis build script
2017-06-18 12:13:56 -04:00
Jack Humbert
51a86b85f3
Merge pull request #1361 from fredizzimo/ergodox_infinity_backlight
...
Add Ergodox Infinity backlight support
2017-06-18 10:15:02 -04:00
Fred Sundvik
2fd670bec0
Add missing include to Ergodox Belak keymap
2017-06-18 17:07:20 +03:00
Fred Sundvik
6ba22b5f5e
Don't define RGBLED_NUM in let-split khord keymap
...
It's already defined correctly by the parent keyboard project, and was
causing problems for rev1, where the pin is different.
2017-06-18 17:03:07 +03:00
root
1a8042ae91
Added personal keymap with underglow, right shift, numpad, and bright hidden behind raise/lower
2017-06-17 23:11:37 -04:00
Jonas Rogers
a284245f77
Atreus52- moved parens and braces to left hand.
2017-06-17 22:51:50 -04:00
Jonas Rogers
85d688e92c
Atreus52- made dvorak layer default.
2017-06-17 21:21:46 -04:00
Jonas Rogers
4c2f04986a
Atreus52- added software reset key.
2017-06-17 21:21:38 -04:00
Jonas
3007d01718
Atreus52- Modified BDO map.
2017-06-17 21:21:30 -04:00
Jonas
3b9fabb9aa
Atreus52- BDO keymap.
2017-06-17 21:21:21 -04:00
jprmesh
a8992a2cfe
Atreus52- Added Nav layer keymap.
2017-06-17 21:20:16 -04:00
Jonas
7837d96b6e
Atreus52- Reworked keymap to be more 40% like.
2017-06-17 21:20:09 -04:00
jprmesh
56026dd4df
Atreus52- Swapped thumb keys.
2017-06-17 21:19:59 -04:00
jprmesh
1552fd6ae1
Atreus52- Last changes to config to get it workin.
2017-06-17 21:19:48 -04:00
jprmesh
133908da74
Atreus52- Some keymap changes.
2017-06-17 21:19:45 -04:00
jprMesh
3c2c489768
Atreus52- Fixed spacing and changed to KC_KEYMAP macro.
2017-06-17 21:19:36 -04:00
jprmesh
b236e51b69
Atreus52- finished initial keymap layout.
2017-06-17 21:19:29 -04:00
jprmesh
17e81baab3
Atreus52- Fixed config.
2017-06-17 21:19:18 -04:00
jprmesh
f9eb11a674
Atreus52- Fixed Qwerty Dvorak switch
2017-06-17 21:18:58 -04:00
jprmesh
bb99d7117c
Atreus52- Changed to KEYMAP macro format.
2017-06-17 21:18:40 -04:00
jprMesh
a5ba30338f
Atreus52- Initial Atreus52 file creation.
2017-06-17 21:18:04 -04:00
Jack Humbert
7feadbd66d
Merge pull request #1401 from geofflane/s65_x_fixes3
...
S65-X Fixes Part 3
2017-06-17 20:14:49 -04:00
Jack Humbert
206233d98c
Merge pull request #1402 from belak/tv44-belak-tap-magic
...
tv44: Rearrange belak keymap and add some tap dance magic
2017-06-17 20:14:23 -04:00
Mathias Andersson
df26ede131
Unify KMAC code indentation
...
It's a little unclear what the style guidelines are for the QMK project.
But I figured that I should at least keep the indentation consistent
within the KMAC part.
2017-06-17 20:06:28 +02:00
Mathias Andersson
67e150a08a
Enable backlight support by default for KMAC
2017-06-17 20:06:28 +02:00
Mathias Andersson
ba945c5e77
Correct layer switching in KMAC keymap readmes
2017-06-17 20:06:28 +02:00
Mathias Andersson
be002137f9
Fix some KMAC code formating
2017-06-17 20:06:28 +02:00
Mathias Andersson
a621c7f88b
Don't include the console by default on the KMAC
2017-06-17 20:06:28 +02:00
Kaleb Elwert
722adce095
tv44: Rearrange belak keymap and add some tap dance magic
2017-06-16 17:08:00 -07:00
Jack Humbert
ff2b01da49
Merge pull request #1400 from belak/belak-ergodox-theme
...
ergodox: initial addition of belak theme
2017-06-16 17:01:54 -04:00
Kaleb Elwert
e9a4a5e961
tv44: add belak keymap
2017-06-16 13:11:40 -07:00
Kaleb Elwert
ef4abfeb31
ergodox: initial addition of belak theme
...
Imported from external repo https://github.com/belak/ergodox-layout at commit
233008ad8c46a85cb118fca0be093c3e751075b0
2017-06-16 10:57:58 -07:00
Geoff Lane
b4802d7567
Fix home and end to be on <>
2017-06-16 11:57:43 -04:00
Geoff Lane
d2a11b523b
LED control on the BL layer
2017-06-15 21:57:50 -04:00
Fred Sundvik
086aad0d7e
Make sure backlight is in the range 0-100
2017-06-16 02:06:30 +03:00
Fred Sundvik
19f0285a76
Fix typo in BACKLIGHT_ENABLE
2017-06-15 23:21:01 +03:00
Kaleb Elwert
29108d1477
tv44: update tong92 keymap to use KEYMAP macro
2017-06-15 12:48:59 -07:00
Kaleb Elwert
4cefb45a2d
tv44: update xyverz keymap to use KEYMAP macro
2017-06-15 12:48:44 -07:00
Kaleb Elwert
f894103997
tv44: update default keymap to use KEYMAP macro
2017-06-15 12:47:57 -07:00
Kaleb Elwert
b56a9a9899
tv44: update jeebak keymap to use new macros and remove custom ones
2017-06-15 12:46:25 -07:00
Kaleb Elwert
e32e7dc0f5
tv44: update smt keymap to use new macros and remove custom ones
2017-06-15 12:45:53 -07:00
Kaleb Elwert
44ce179192
tv44: Fix up the KEYMAP macro
...
Previously KEYMAP referred to the KEYMAP_ARROW layout and had 45 keys. It makes
more sense for the default keymap to be the 44 key layout, as is implied by the
name.
Additionally keymaps for all other known layouts have been added:
KEYMAP - base layout
KEYMAP_ARROW - additional key in bottom right
KEYMAP_COMMAND - additional key in bottom left
KEYMAP_ARROW_COMMAND - combination of KEYMAP_ARROW and KEYMAP_COMMAND
2017-06-15 12:42:23 -07:00
Geoff Lane
e553bb3af4
LED init works with just pin declared
2017-06-15 13:42:14 -04:00
Geoff Lane
b107d64d69
Use standard QMK key codes for RGB control
2017-06-15 13:12:36 -04:00
Geoff Lane
c81be932d2
Fix left shift in ansi layout
2017-06-15 13:12:36 -04:00
Geoff Lane
899584187f
Fix esc key
2017-06-15 13:12:36 -04:00
Jack Humbert
6a75a7d672
Merge pull request #1394 from Khord/master
...
Adding custom keymap for Let's Split and updates to custom Planck keymap
2017-06-15 12:34:18 -04:00
Daniel Shields
cc158d90ae
Minor updates to planck/keymaps/dshields
...
* tweaks to tap dance keys
* tidy up code
* save a few bytes
2017-06-15 09:41:59 +01:00
Dylan Khor
5c11ba74d8
tap dance and hold changes to make planck match lets split
2017-06-15 03:34:08 -04:00
Dylan Khor
a44ba492ea
minor fixes
2017-06-15 03:26:04 -04:00
Dylan Khor
22f985eba7
Add custom let's split keymap
2017-06-15 07:15:27 +00:00
Martin Gondermann
49cfdb544d
Added HyperTab and Ctrl/Fn as well as Space cadet parens ( #1390 )
...
* Added HyperTab and Ctrl/Escape as well as Space cadet parens to magicmonty keymap
* Replaced CTL_ESC With FN_ESC
2017-06-14 07:20:43 -07:00
Ethan Madden
a7942c4f48
Added whitefox keymap
2017-06-13 16:01:28 -07:00
Jack Humbert
3d5d3e1b0c
Merge pull request #1387 from antelaurijssen/master
...
Submitting my own custom layout for S60X keyboard
2017-06-12 20:47:35 -04:00
Ante Laurijssen
f37daa5343
Properly formatted unordered lists in readme.md
2017-06-12 20:24:56 -04:00
Ante Laurijssen
3ee346c07b
Mods to readme.md
2017-06-12 20:20:28 -04:00
Ante Laurijssen
78a4cfd453
Modifications to readme.md and deletion of keyboard layout images
2017-06-12 20:13:17 -04:00
Jack Humbert
6b5d67fcc6
Merge pull request #1389 from geofflane/keyboard_s65_x_2
...
Keyboard S65-X Support #2
2017-06-12 17:08:27 -04:00
Geoff Lane
0440c0f072
Add ISO layout for S65-X
2017-06-12 16:57:01 -04:00
Geoff Lane
568c662c14
Fix media controls in default layout
2017-06-12 16:19:57 -04:00
Geoff Lane
96b0382fb4
Fix backslash and some of the docs
2017-06-12 16:16:42 -04:00
Martin Gondermann
a5b5279da9
Add MIDI layer to magicmonty keymap ( #1386 )
...
* Add MIDI layer
* Respect brightness level on layer signalling
* Add hotkey in control layer for signalling state
* Update layout.png
* Remove image and replace it with imgur link
2017-06-12 08:48:01 -07:00
Jack Humbert
23c448b21d
remove .hex, .PNG, .jpg
2017-06-11 22:16:42 -04:00
Jack Humbert
a7ce482d14
remove the rest of the .pngs
2017-06-11 21:24:23 -04:00
Ante Laurijssen
54d48140cd
-MIDI Chords now using process_record_user instead of F(n) keys
...
-Morse Code shift keys implemented
2017-06-11 16:00:40 -04:00
Jack Humbert
c02f9a6ee4
remove most .pngs
2017-06-11 15:36:28 -04:00
Luiz Ribeiro
60153e7bbc
Always send 3 * RGBLED_NUM bytes through I2C on ps2avrGB
...
This wasn't going to work on boards with a different number of LEDs,
since I was always sending 48 bytes.
2017-06-11 12:30:48 -04:00
Luiz Ribeiro
945f2f5916
Fixed rgblight_types.h
2017-06-11 12:30:48 -04:00
Luiz Ribeiro
d4cd5dda5c
Added a build flag for using a custom rgblight driver
2017-06-11 12:30:48 -04:00
Luiz Ribeiro
964d7060e1
Simplified ps2avrGB rgblight_set logic a bit
2017-06-11 12:30:48 -04:00
Luiz Ribeiro
6037cede2c
rgblight support for ps2avrGB
2017-06-11 12:30:48 -04:00
Geoff Lane
b1e01e9d1f
Support Sentraq S65-X
...
Add initial support for ANSI layout of S65-X.
Includes support for controlling RGB underlighting.
2017-06-10 21:09:38 -04:00
Jack Humbert
ca01d94005
convert docs to lowercase and underscores
2017-06-10 14:58:24 -04:00
Jack Humbert
d81135410c
Merge pull request #1382 from binaryplease/handwired_binaryplease
...
Handwired binaryplease
2017-06-09 21:09:52 -04:00
binaryplease
1502c9c935
put colemak and qwert switching on the top right
2017-06-10 02:44:28 +02:00
binaryplease
0c1dc91d74
removed swapping keys in adjust layer
2017-06-10 02:42:27 +02:00
binaryplease
e3f657dfeb
commented out unused layers
2017-06-10 02:01:51 +02:00
Jack Humbert
d2aec1625d
removes some images
2017-06-09 14:05:33 -04:00
Jack Humbert
728f2f8d00
Merge pull request #1378 from nicinabox/fix-ls-avrdude
...
Let's Split avrdude portability fix
2017-06-09 10:35:33 -04:00
Jack Humbert
fc39a288ed
remove mechmini keymap from ps2avrGB
2017-06-09 10:25:20 -04:00
Jack Humbert
8c4a59611a
due diligence, etc
2017-06-09 10:22:58 -04:00
Nic Aitch
3b38e6954a
Use single brackets for portability with other shells
2017-06-09 09:14:44 -05:00
Jack Humbert
9ac2ed280c
move mechmini to own folder
2017-06-09 10:11:34 -04:00
skullY
2a667eba2a
Cleanup the Clueboard readme files.
2017-06-08 20:42:37 -07:00
Martin Gondermann
e4eb4eaa16
Fix layer LED signalling in magicmonty keymap ( #1373 )
...
* Fix layer LED signalling in magicmonty keymap
* Include the breathing modes in layer signalling
* Reverts mode to 1 as the other modes flicker
* Add Cursor keys on VIM positions and PAUSE to function layer
2017-06-08 19:55:34 -07:00
Mathias Andersson
1b02b2006e
Add support for KMAC
2017-06-08 19:35:27 +02:00
Stick
4b50ab029d
Revert "ugly workaround for ErgoDoxEZ LED bugs: turn 'em all off"
...
This reverts commit f397402e10
2017-06-08 08:59:33 -05:00
Stick
5a70cb30ee
trying to fix LEDs
2017-06-08 08:59:30 -05:00
Stick
3af2bca1fc
Merge remote-tracking branch 'upstream/master'
2017-06-08 08:52:32 -05:00
Ante Laurijssen
7146dfea6e
Created special shift keys for Morse layer that change variable value, enabling to send “shifted” special morse code characters.
2017-06-07 23:57:14 -04:00
Ante Laurijssen
8f80f35186
Working on Morse Code Macros
2017-06-07 22:01:28 -04:00
chilifries
c9e0068cf2
Added support for Mechmini v1
2017-06-07 16:24:40 -07:00
Jack Humbert
84012d8243
Merge pull request #1359 from agbell/PR
...
Permissive Hold, and two keymaps
2017-06-07 18:47:29 -04:00
Stick
035f7bb1bf
Merge remote-tracking branch 'upstream/master'
2017-06-07 15:55:52 -05:00
Martin Gondermann
8cc0035ea0
Add new keyboard layout for the ClueBoard ( #1371 )
2017-06-07 08:18:26 -07:00
Jack Humbert
5d83d320cb
Merge pull request #1366 from abperiasamy/refine-layout
...
Replace enter with quote and few reorgs
2017-06-06 12:35:26 -04:00
Daniel Shields
ad7a5bdc4f
Additional tap dance keys/functions for planck/keymap/dshields
2017-06-06 13:09:55 +01:00
Ante Laurijssen
1b8ed53f21
Added a couple of custom keys and updated layer image
2017-06-05 22:17:35 -04:00
Fred Sundvik
b51a0db6ed
Add backlight support to the default Ergodox Infinity animations
2017-06-03 22:04:10 +03:00
Fred Sundvik
2a7f9a7e46
Add backlight control to the IS31FL3731 driver
2017-06-03 21:30:52 +03:00
Adam Bell
4ab61344f5
Adding permissive_hold
2017-06-03 10:28:46 -04:00
Adam Bell
587b0de6e5
adding lets split keymap
2017-06-03 10:28:46 -04:00
Adam Bell
82de4d039d
Ergodox Adam keymap
2017-06-03 10:28:36 -04:00
Fred Sundvik
0f9bfafb9e
Turn off LED matrix by default
2017-06-03 15:31:02 +03:00
Fred Sundvik
a916f4e8b8
Let BACKLIGHT_ENABLE control the Infinity LEDs
2017-06-03 14:34:50 +03:00
Ante Laurijssen
9cfa37bb3d
Improvements and corrections to morse code macros layer
2017-06-02 22:57:57 -04:00
Stick
f397402e10
ugly workaround for ErgoDoxEZ LED bugs: turn 'em all off
2017-06-02 20:02:02 -05:00
Stick
4cf17210b6
moved alt out from under space
2017-06-02 19:51:29 -05:00
Stick
4ba9917f82
Merge remote-tracking branch 'upstream/master'
2017-06-02 19:50:54 -05:00
Daniel Shields
7cbd16c902
Initial commit for gherkin keyboard support. Compiles but untested.
2017-06-02 14:45:42 +01:00
Jack Humbert
9069edd934
Merge pull request #1347 from nooges/nyquist
...
Add Nyquist keyboard support
2017-06-01 12:58:33 -04:00
Jack Humbert
ec3e684123
Merge pull request #1350 from originerd/add-originerd-planck-keymap
...
Add originerd planck keymap
2017-06-01 11:19:40 -04:00
Jack Humbert
05e6dd6527
Merge pull request #1351 from Alfrheim/fixing_dvorak_layout
...
replacing one R for a T
2017-06-01 11:19:20 -04:00
Jack Humbert
cf77c42c72
Merge pull request #1353 from 333fred/333fred-layout
...
ergodox/333fred layout
2017-06-01 11:18:56 -04:00
Danny Nguyen
aae727d9ec
Update keymap layout comments
2017-06-01 11:15:21 -04:00
Daniel Shields
db0ac3bcb3
Tweak reported power consumption to work with iOS
2017-06-01 09:18:33 +01:00
Danny Nguyen
db82b17d6e
Remove OLED code and set I2C rate back to 100kHz
2017-06-01 01:26:06 -04:00
Fredric Silberberg
dded79a412
Update licensing on visualizer.c
2017-05-31 18:07:02 -07:00
Fredric Silberberg
cfaf34daec
Updated readme
2017-05-31 17:57:38 -07:00
Fredric Silberberg
aa1b1c5756
Added several new macros
2017-05-31 17:42:50 -07:00
Fredric Silberberg
f35c82ccb2
Fixed numpad 0 layout
2017-05-31 10:27:39 -07:00
Alfrheim
974a77a07c
replacing one R for a T
2017-05-31 15:19:37 +02:00
Jitae Kim
c33c2bbade
Add originerd planck keymap
2017-05-31 22:00:44 +09:00
Fredric Silberberg
4eba71841e
Use code blocks for keyboard layouts
2017-05-30 23:56:28 -07:00
Fredric Silberberg
95ae256482
Completed iteration 1 of my layout
2017-05-30 23:52:20 -07:00
jpetermans
9af272e4bb
Update lock led processing and remove debug msgs
2017-05-30 21:52:44 -07:00
Jack Humbert
57cfb5f1ae
Merge pull request #1348 from Dbroqua/master
...
Added DK60 keyboard
2017-05-30 23:12:11 -04:00
Ante Laurijssen
fbaf964a85
Improvements to Midi and keymap
2017-05-30 21:27:00 -04:00
Fredric Silberberg
949540d601
Added initial keymap files
2017-05-30 18:01:09 -07:00
dbroqua
c5d3faace5
Merge remote-tracking branch 'origin/feature/DK60'
2017-05-30 23:10:14 +02:00
dbroqua
a381eb01f5
- Updated copyright
2017-05-30 23:09:39 +02:00
Danny Nguyen
7a433a7f3d
Update copyright info
2017-05-30 16:52:02 -04:00
Danny Nguyen
fbec02c148
Remove Let’s Split plate files
2017-05-30 16:42:04 -04:00
Damien Broqua
061bb4a0b8
Merge remote-tracking branch 'origin/feature/DK60'
2017-05-30 22:17:20 +02:00
Damien Broqua
05f5243426
- Updated readme
2017-05-30 22:17:03 +02:00
Damien Broqua
55d6750254
Merge remote-tracking branch 'origin/feature/DK60'
2017-05-30 22:15:07 +02:00
Damien Broqua
e280f7aad7
- Added Capslock/Esc led
2017-05-30 22:13:34 +02:00
Nick Choi
3c4022c41b
hmm?
2017-05-30 14:19:57 -04:00
Nick Choi
2c9f846608
Merge pull request #2 from qmk/master
...
pull in new qmk changes
2017-05-30 14:17:48 -04:00
Danny Nguyen
be204f9cdd
Update readme
2017-05-30 13:29:30 -04:00
Damien Broqua
f06f883589
- Some changes on DK60
2017-05-30 16:59:56 +02:00
Ante Laurijssen
06684555d2
Another typo...
2017-05-29 22:16:17 -04:00
Ante Laurijssen
cd4ccee703
Corrected typo in readme.md
2017-05-29 22:13:52 -04:00
Ante Laurijssen
1ef911d150
Added a few images
2017-05-29 22:11:48 -04:00
Ante Laurijssen
4c48c29c0e
Added MIDI_CHORD layer and other little fixes.
...
Updated readme.md
2017-05-29 22:09:06 -04:00
Nick Choi
5393bc6f4e
switched to uint8 and 16
2017-05-29 21:25:50 -04:00
Danny Nguyen
4a8da0cb45
Modify pinout and layouts for Nyquist
2017-05-29 16:20:06 -04:00
Danny Nguyen
aeade1b197
Fork Let’s Split files
2017-05-29 16:04:46 -04:00
Priyadi Iman Nurcahyo
7eebdd4760
Jokrik's Clueboard layout ( #1340 )
2017-05-29 09:10:34 -07:00
binaryplease
3ea5726739
redefined options in config.h
2017-05-29 13:53:13 +02:00
Erez Zukerman
41fa638aa8
Adds prevent stuck modifiers to EZ default
2017-05-28 20:05:37 -04:00
binaryplease
a83662329d
overwriting optins in makefile and configuration
2017-05-29 01:28:18 +02:00
binaryplease
64e4c47ae4
disabled backlight and audio
2017-05-29 01:14:25 +02:00
binaryplease
58af88eb51
copied default planck keymap to handwired_binaryplease;
2017-05-29 00:52:38 +02:00
Ante Laurijssen
a584675735
Midi Chord Function is now working! But some chords lag...
2017-05-28 08:14:17 -04:00
Jack Humbert
d24da945d1
Merge pull request #1319 from Johannes-Larsson/master
...
Add planck/johannes layout
2017-05-26 18:33:25 -04:00
ariasuni
e87691fa5d
Fix undefined reference errors with avr-gcc 7.1
2017-05-27 00:25:35 +02:00
Nick Choi
66e9cf9718
clarified tap
2017-05-26 15:59:34 -04:00
dbroqua
6b994ecd82
- Added schematic for Trackpoint demonstration
2017-05-26 21:27:11 +02:00
dbroqua
81e85a1a4e
- Added integration of IBM Trackpoint
2017-05-26 20:35:31 +02:00
Ante Laurijssen
6b1f707ce9
Still working on these MIDI CHORDS!
2017-05-26 09:54:40 -04:00
Nick Choi
1bff72c009
-
2017-05-26 00:19:12 -04:00
Nick Choi
d462409762
tenative readme for variable timing tap
2017-05-26 00:18:59 -04:00
Ante Laurijssen
b4b06f81b5
More changes to keymap.c to try and get midi chords to work
2017-05-25 23:03:33 -04:00
Nick Choi
aeb3a34636
moved specific tap term to its own function
...
included custom_tapping_term in action struct
2017-05-25 16:26:30 -04:00
jpetermans
ac97870801
reduce recurring writes to lock leds
2017-05-25 13:00:21 -07:00
Nick Choi
e695b5a33b
Added per case tapping term, updated FF-nikchi keymap.
2017-05-25 00:41:00 -04:00
Nick Choi
17a378715e
Tapping Term and Memes TD for FF
2017-05-24 23:43:02 -04:00
Ante Laurijssen
1a0dfbbc96
More updates to keymap.c - still errors with midi when trying to compile
2017-05-24 21:15:41 -04:00
Johannes Larsson
6d08de5c67
readme, media keys fix
2017-05-24 21:35:31 +02:00
jpetermans
083267680d
Restore deleted MEMO.txt from master
2017-05-24 12:26:56 -07:00
Johannes Larsson
e4f1b238b3
revert changes to config.h
2017-05-24 21:24:13 +02:00
jpetermans
e6c9b07e1c
Merge branch 'user_led_configuration' into infinity60
...
Conflicts:
keyboards/infinity60/keymaps/jpetermans/keymap.c
2017-05-24 12:07:18 -07:00
jpetermans
2dcd6c38fa
Merge remote-tracking branch 'upstream/master' into infinity60
2017-05-24 11:51:20 -07:00
jpetermans
f54b4771eb
keymap example update and tweak to set_led_bit function
2017-05-24 11:20:50 -07:00
Jack Humbert
7a4ec3bd92
Merge pull request #1316 from nikchi/master
...
FrostyFlake Keymap
2017-05-24 13:59:30 -04:00
Johannes Larsson
690957cdbd
media keys and stuff
2017-05-24 19:00:56 +02:00
Nick Choi
006ba4bf36
moved unicodemap rules to localer make
2017-05-24 12:36:36 -04:00
Johannes Larsson
b9cf386b21
Merge branch 'master' of https://github.com/qmk/qmk_firmware
2017-05-24 17:58:11 +02:00
Erez Zukerman
a965e5b735
tweaks default mouse speed constants
2017-05-24 07:56:41 -04:00
Nick Choi
ef1714f443
more emoji function comments
2017-05-24 00:35:04 -04:00
Nick Choi
6536b1ce2a
Tap dancing emoji support 😩 😩
2017-05-23 23:52:48 -04:00
Nick Choi
b3eeb9d84a
removed s
2017-05-23 18:47:06 -04:00
Nick Choi
0e174fcb48
Merge branch 'master' of https://github.com/nikchi/qmk_firmware
2017-05-23 13:13:23 -04:00
Nick Choi
3ed2147a88
preonic map
2017-05-23 13:13:20 -04:00
Nick Choi
ec86fac6ee
Merge pull request #1 from qmk/master
...
pull new to mine
2017-05-23 13:08:44 -04:00
Ante Laurijssen
4d783d0e69
More work on my keymap.c and added .png images of my different layers.
2017-05-22 23:30:25 -04:00
Johannes Larsson
4f1007952b
merge
2017-05-22 15:27:57 +02:00
Johannes Larsson
53b094934f
matrix layout
2017-05-22 15:25:53 +02:00
Ante Laurijssen
06433eb1a0
More work on keymap.c and config.h
2017-05-21 22:37:20 -04:00
Ante Laurijssen
34a1bf9e20
Merge https://github.com/qmk/qmk_firmware
...
Update my qmk_firmware fork
2017-05-21 08:44:52 -04:00
Ante Laurijssen
b766407cbe
Continuing work on keymap.c
2017-05-21 08:40:42 -04:00
jerryen
9c284786e7
Workaround for the macOS caps lock delay ( #1308 )
...
* Add 80ms delay for KC_CAPS when used as a tap key
Workaround for the macOS caps lock delay
* Revert "Increase TAPPING_TERM for the Clueboard"
This reverts commit a74e69e9fa
2017-05-19 17:24:47 -07:00
Jack Humbert
85df687348
m10a lowercase
2017-05-18 18:55:07 -04:00
Erez Zukerman
0d8c73dc8d
Merge pull request #1303 from cwesterlund/dvorak_dev_swe
...
Created a dvorak keymap for Swedish developers using Visual Studio
2017-05-18 15:31:16 -07:00
Ante Laurijssen
c686793b59
Merge https://github.com/qmk/qmk_firmware
...
Update from QMK main
2017-05-17 23:06:57 -04:00
tengg
aaa01d0a4e
ESC/GRAVE/TILDE better handling ( #1307 )
...
* revise HHKB bootloader_size to 4096 such that sw reset works
* cleanup esr/grave/tilde handling function
2017-05-17 18:20:01 -07:00
Ante Laurijssen
26c6f6a85c
Added Space Cadet Rollover Disable to config.h
2017-05-16 22:08:45 -04:00
skullY
a74e69e9fa
Increase TAPPING_TERM for the Clueboard
2017-05-16 13:09:23 -07:00
skullY
3c5b915078
Make KC_GRV accessible
2017-05-16 13:02:22 -07:00
Christian Westerlund
fcef83a5d0
Created a dvorak keymap for Swedish developers using Visual Studio
2017-05-16 15:15:42 +02:00
Ante Laurijssen
814b570ba1
Working on keymap.c file...
2017-05-15 22:56:33 -04:00
Nick Choi
5d965a8d41
emojis and reorg
2017-05-15 02:19:50 -04:00
Nick Choi
eb660ef218
emoji support but
2017-05-15 01:52:45 -04:00
Nick Choi
b2b72058e5
change readme
2017-05-15 00:12:04 -04:00
Nick Choi
888026ae73
nikchi flake
2017-05-15 00:10:25 -04:00
Ante Laurijssen
ee0b34feaf
Started working on custom midi chord function
2017-05-14 20:07:35 -04:00
Ante Laurijssen
f006ebebbd
Initial push of my keymap
2017-05-14 16:07:44 -04:00
Jack Humbert
04069c94cc
Merge pull request #1297 from khogeland/satan-colemak
...
Colemak layout for GH60 Satan
2017-05-12 16:24:51 -04:00
Kevin Hogeland
b767719fc8
Colemak layout GH60 Satan
2017-05-12 12:03:09 -07:00
Nikolaus Wittenstein
8ddbf7f59f
Fix spelling of "persistent"
...
Fixes #1201 .
2017-05-11 15:32:35 -04:00
Jack Humbert
b412bb8d8c
Merge pull request #1283 from TerryMathews/master
...
Establish support for Bathroom Epiphanies Tiger Lily controller
2017-05-11 14:34:02 -04:00
Daniel Shields
eb3f80b924
Add new features to dshields keymap.
...
- one shot layers, dynamic macros and tap dance keys
- add a basic readme.md and layout image.
2017-05-11 09:16:55 +01:00
jpetermans
164a6c994b
reorder mailbox msg data; formatting
2017-05-10 15:53:59 -07:00
jpetermans
a144968807
remove breath functions from keymap
2017-05-08 16:38:44 -07:00
jpetermans
16774333ad
last readme fix
2017-05-08 16:28:04 -07:00
jpetermans
5fc5661147
third readme fix attempt
2017-05-08 16:19:11 -07:00
jpetermans
d1ff2bb9db
readme fix
2017-05-08 16:17:40 -07:00
jpetermans
821f72eae9
documentation cleanup
2017-05-08 16:15:20 -07:00
Stephen Tudor
9a8904a9c0
Add smt keymap for Clueboard (HHKB-style layout) ( #1286 )
...
* Add keymap for smt Clueboard (HHKB layout)
* Add readme for smt Clueboard (HHKB) keymap
* Flesh out the keymap a bit more to support Colemak & Dvorak
* Update README with layout image
2017-05-08 15:32:15 -07:00
jpetermans
967cf0f6d4
Merge remote-tracking branch 'upstream/master' into user_led_configuration
2017-05-08 15:24:50 -07:00
jpetermans
5df74f3ba7
updated keymap for new led functions
2017-05-08 15:13:02 -07:00
jpetermans
2c5b551970
CLeaned out debug code
2017-05-08 14:35:08 -07:00
jpetermans
52f671c23e
small code cleanup
2017-05-08 11:57:40 -07:00
Erez Zukerman
153eb95ab2
Merge pull request #1279 from awpr/master
...
Change to per-key eager debouncing for ErgoDox EZ.
2017-05-07 21:52:00 -04:00
Jack Humbert
b11a5be62c
Merge pull request #1278 from shieldsd/master
...
Add new keymap for dshields.
2017-05-07 20:18:23 -04:00
Jack Humbert
0b050f6c33
Merge pull request #1280 from tobsn/patch-1
...
lowercase .jpg
2017-05-07 20:17:47 -04:00
Jack Humbert
05b356dea7
Merge pull request #1282 from coderkun/coderkun_neo2
...
Merge changes for coderkun’s Neo2 layout
2017-05-07 20:16:30 -04:00
TerryMathews
84a358845b
Fix compile error
2017-05-07 18:00:06 -04:00
Adam Lee
d099266853
[Miuni32] Rm accidentally committed file
2017-05-07 14:42:21 -07:00
Adam Lee
ba90cf422c
Merge remote-tracking branch 'bigtunaio/layouts/adam-lee' into dev
2017-05-07 14:40:37 -07:00
Adam Lee
29df2be2a9
Merge remote-tracking branch 'upstream/master' into dev
2017-05-07 14:35:43 -07:00
TerryMathews
3381254c65
Establish support for Bathroom Epiphanies Tiger Lily controller
...
Replacement controller for Filco Majestouch 2 104 key keyboard. BE
advises code will also work with the Black Petal controller - I don't
have one to test with. Tests working perfectly on my Filco.
2017-05-07 17:23:19 -04:00
dbroqua
230c70e285
- Initial commit for branch DK60
2017-05-07 22:56:27 +02:00
coderkun
d28d390ad6
Update README for keymap “coderkun_neo2”
2017-05-06 12:25:24 +02:00
coderkun
49046f621b
Merge tag '0.5.43' into coderkun_neo2
2017-05-06 12:19:45 +02:00
coderkun
9e7448ea89
Fix F-keys on right hand to start on first key
2017-05-06 12:17:51 +02:00
Tobias O
b2083e21a2
lowercase .jpg I think
...
i guess that fixes the image link - currently its broken
2017-05-05 23:55:06 +02:00
Daniel Shields
cb60fe393f
Add new keymap for dshields.
2017-05-05 14:41:13 +01:00
Jack Humbert
2704c163da
Merge pull request #1272 from Thor77/ps2avrGB-keymap-kc-prefix
...
[ps2avrGB] Add KEYMAP without KC-prefix
2017-05-04 15:07:57 -04:00
Jack Humbert
3af95509b5
Merge pull request #1273 from Vifon/pr_1267_fix
...
Add DYN_REC_STOP to the dynamic macros, cleanup PR #1267
2017-05-04 15:07:04 -04:00
tengg
425f0a768b
revise HHKB bootloader_size to 4096 such that sw reset works ( #1274 )
2017-05-04 10:27:35 -07:00
Thor77
7f3b1232c4
Use KC_KEYMAP for default-keymap
...
and remove obsolete explicit line-separator "\"
2017-05-03 22:13:46 +02:00
Thor77
38b076d22d
Add KEYMAP without KC_##-prefix
...
and rename old variant to KEYMAP_KC
2017-05-03 22:01:02 +02:00
jpetermans
b27fb216ef
Testing initial blink support
2017-04-30 16:27:46 -07:00
Jack Humbert
26b51383b2
Merge pull request #1266 from ryanmaclean/patch-5
...
Adding AMJ60 ANSI Maximized Layout
2017-04-30 16:57:14 -04:00
Jack Humbert
29026ec023
Merge pull request #1268 from priyadi/promethium
...
Promethium keymap update
2017-04-30 11:18:54 -04:00
Jack Humbert
d1d2b87f97
fixes s60_x keyboard
2017-04-30 10:48:17 -04:00
Priyadi Iman Nurcahyo
343f8d368e
Simple RGB backlight theming
2017-04-30 18:04:58 +07:00
Priyadi Iman Nurcahyo
2f28652dcc
Syntax fix
2017-04-30 18:03:03 +07:00
Weiyi Lou
c8ac556e63
Update vifon keymap to use DYN_REC_STOP
2017-04-30 19:48:07 +10:00
Weiyi Lou
1201d4910f
Add cinaeco hhkb keymap
2017-04-30 19:30:39 +10:00
Ryan MacLean
ff512ea5b4
Addind Sample Maxed Out Keymap
...
Keeping hold space for fn1, adding three other user-mappable keys.
2017-04-29 16:18:26 -07:00
Ryan MacLean
9122b34a47
Adding Maximized Layout
...
Both split shifts and HHKB split backspace.
2017-04-29 16:16:21 -07:00
dbroqua
7180e195e8
Merge branch 'master' of https://github.com/Dbroqua/qmk_firmware
2017-04-29 15:04:01 +02:00
dbroqua
838aae1645
- Fixed bugs in rules.mk for S60-X
...
- Updated dbroqua layout for S60-X (added backlight)
2017-04-29 15:02:54 +02:00
Priyadi Iman Nurcahyo
d8f1949029
Promethium update: demo LED, fix PS2 delay, fix LED ordering, change click frequency
2017-04-29 13:21:27 +07:00
htang156
425e7348d8
Modified ht_156 keymap
2017-04-27 23:12:43 -07:00
jpetermans
b3945c103c
Simplified processing in led_controller; more control at user level.
2017-04-26 23:12:25 -07:00
Jack Humbert
26bbfd7812
Merge pull request #1259 from laelath/master
...
Added a proper README to the lae3 keymap
2017-04-26 19:22:36 -04:00
Andrew Pritchard
cd30a60d0e
Change to per-key eager debouncing for ErgoDox EZ.
...
Empirically, waiting for N consecutive identical scans as a debouncing
strategy doesn't work very well for the ErgoDox EZ where scans are very
slow compared to most keyboards. Instead, debounce the signals by
eagerly reporting a change as soon as one scan observes it, but then
ignoring further changes from that key for the next N scans.
This is implemented by keeping an extra matrix of uint8 countdowns, such
that only keys whose countdown is currently zero are eligible to change.
When we do observe a change, we bump that key's countdown to DEBOUNCE.
During each scan, every nonzero countdown is decremented.
With this approach to debouncing, much higher debounce constants are
tolerable, because latency does not increase with the constant, and
debounce countdowns on one key do not interfere with events on other
keys. The only negative effect of increasing the constant is that the
minimum duration of a keypress increases. Perhaps I'm just extremely
unlucky w.r.t. key switch quality, but I saw occasional bounces even
with DEBOUNCE=10; with 15, I've seen none so far. That's around 47ms,
which seems like an absolutely insane amount of time for a key to be
bouncy, but at least it works.
2017-04-26 15:29:39 -07:00
laelath
196740a0bb
Expanded lae3 keymap readme
2017-04-26 13:56:01 -07:00
Jack Humbert
5a809ac178
Merge pull request #1258 from smt/smt/hhkb
...
Add smt keymap for HHKB
2017-04-26 15:30:36 -04:00
Jack Humbert
7bd4559b4b
Merge pull request #1231 from Dbroqua/master
...
S60-X RGB support
2017-04-25 14:09:41 -04:00
Jack Humbert
9fa7a788d3
Merge pull request #1253 from laelath/master
...
Added lae3 keymap
2017-04-25 14:08:52 -04:00
Jack Humbert
627dd8a73c
Merge pull request #1255 from ryanmaclean/patch-4
...
Initial Ortholinear Commit for AMJPad
2017-04-25 14:08:16 -04:00
Josh Black
d6386b108b
Add RAMA x Machine Industries M10A to the keyboards directory
2017-04-25 19:00:44 +01:00
Stephen Tudor
4cc41de50b
Add smt keymap for HHKB
2017-04-24 11:16:14 -04:00
Justin Frank
e2a5dfdba6
Switched Alt and GUI key places
2017-04-23 19:38:40 -07:00
Ryan MacLean
d27ff5ccf6
Adding Right Layout
2017-04-22 22:34:14 -07:00
Ryan MacLean
2e62ff9807
Initial Ortho Commit (LEFT SIDE)
...
Using only one layer, and activating it with two keys at the moment.
As with previous comments, this isn't final, but is a good starting point for a one-handed keyboard, half a Planck-like ortholinear keyboard, or a sample to show a layout with a function layer.
2017-04-22 20:49:34 -07:00
Justin Frank
7f3224b117
Added lae3 keymap
2017-04-22 15:15:17 -07:00
Solomon
187c78f3cb
Added an additional clueboard layout. ( #1252 )
...
* Current building keymap
* Working media keys
* Added mute key. Fixed volume. Fixed media
* Updating readme
* Swapped readme order
2017-04-22 06:25:41 -07:00
skullY
973e91078b
Tweak the shift_fn keymap so it works
2017-04-21 21:46:01 -07:00
dbroqua
215dd126d0
- Moved S60-X RGB in sub project for S60-X
2017-04-19 22:12:23 +02:00
Jack Humbert
460b5f8751
Merge pull request #1246 from reversebias/master
...
Initial support for the Mitosis Keyboard
2017-04-19 08:43:28 -04:00
reversebias
43fd889d7e
Update readme.md
2017-04-19 22:39:44 +10:00
Jack Humbert
95242fe0f1
Merge pull request #1245 from fredizzimo/fix_lcd_pin_configuration
...
Fix LCD SS pin configuration
2017-04-19 07:50:03 -04:00
Jack Humbert
4760b26bec
Merge pull request #1244 from ryanmaclean/patch-3
...
Adding Maximized Keymap
2017-04-19 07:49:46 -04:00
Jack Humbert
ff4ad46dca
Merge pull request #1243 from Xyverz/master
...
Removed LT macros
2017-04-19 07:47:56 -04:00
cam
43964438fb
First Commit
2017-04-19 20:27:49 +10:00
reversebias
3c3be98a06
Delete temp
2017-04-19 20:15:44 +10:00
reversebias
e27c50669a
Create temp
2017-04-19 20:12:50 +10:00
Priyadi Iman Nurcahyo
f9d226ca50
tune clicks
2017-04-19 12:35:05 +07:00
Priyadi Iman Nurcahyo
3c7db55ec5
Merge remote-tracking branch 'upstream/master' into promethium
2017-04-19 12:04:15 +07:00
Priyadi Iman Nurcahyo
ce0efa6b9a
Fix LED sequence; bug fixes
2017-04-19 12:03:48 +07:00
Fred Sundvik
430a8e1750
Fix LCD SS pin configuration
...
There was a typo, so the attempted configuration proably didn't do
what it should have done. I think it left the pin floating, and
could cause the LCD problems issue-1230.
2017-04-19 07:59:39 +03:00
Ryan MacLean
34130d56f1
Adding Sample Max Layout
2017-04-18 21:54:58 -07:00
Ryan MacLean
0a8df2c5e3
Adding Maximized Keymap
...
For use with grid layout pads.
2017-04-18 21:53:10 -07:00
Xyverz
b844fe7efd
LT doesn't work with tri_layer. Removed it from this keymap.
2017-04-18 20:36:26 -07:00
Xyverz
3a00aafd39
swapped RAISE with LOWER in layer-tapping macros.
2017-04-18 18:15:46 -07:00
dbroqua
fecb932945
- Fixed bug in keymap for s60-X RGB
2017-04-18 22:26:32 +02:00
Jack Humbert
be0afd24bf
Merge pull request #1239 from priyadi/promethium
...
Keymap updates
2017-04-18 16:17:27 -04:00
Jack Humbert
7a16a30e6a
Merge pull request #1236 from Xyverz/master
...
Revamp TV44 keymap.
2017-04-18 16:08:16 -04:00
Jack Humbert
a25d4a90c3
Merge pull request #1235 from siroken3/siroken3
...
Siroken3
2017-04-18 16:06:27 -04:00
Priyadi Iman Nurcahyo
5bc0c4a011
Fix Planck compatibility
2017-04-19 02:55:19 +07:00
Priyadi Iman Nurcahyo
3fa0b66289
Keymap updates and some adjustment for latest version of QMK
2017-04-19 02:52:57 +07:00
Priyadi Iman Nurcahyo
93b2f23bba
Promethium rev2
...
* 10 more indicator LEDs
* Piezo buzzer
* Uses HC138 decoder to free up 5 pins
* Trackpoint buttons are now part of matrix
2017-04-19 01:38:08 +07:00
Stick
8665ed3efc
small changes
2017-04-18 09:46:07 -05:00
Xyverz
41d45afd2a
Fixed a weird diff mishap.
2017-04-17 21:54:02 -07:00
Xyverz
e11cb44926
Merge branch 'tv44_revamp'
2017-04-17 20:20:27 -07:00
Xyverz
a3aadd888f
Updated my TV44 keymap to be more planck-like.
...
Used the current default planck keymap as a guide.
2017-04-17 20:15:57 -07:00
David Baldwynn
acd63bc03c
Fixed dvorak layout for Atreus50
2017-04-17 12:05:47 -07:00
Xyverz
a343188dcf
macros to make keymap reading easier.
2017-04-16 21:52:49 -07:00
Xyverz
a22286e834
Added keymap to TV44 Revamp
2017-04-16 21:09:23 -07:00
htang156
4634e3802c
Added simple macros to test.
2017-04-16 17:39:04 -07:00
htang156
c4f93e237e
Added media layer for ht_156
2017-04-16 16:08:31 -07:00
htang156
f9aa75fe95
Added ht_156 keymap files
2017-04-16 15:31:05 -07:00
Adam YH Lee
9d4050586d
Merge branch 'master' into layouts/adam-lee
2017-04-16 15:20:31 -07:00
Adam YH Lee
857600aa4b
Merge branch 'master' into dev
2017-04-16 15:19:20 -07:00
Adam YH Lee
7e930626eb
Add a personal layout for adam
...
Collectively we should keep on working on the "default" layout.
I am adding my own layout to freely explore adjustments
and new features.
2017-04-16 15:06:08 -07:00
Adam YH Lee
22afddb8e8
Replace RALT with RSFT
2017-04-16 14:50:25 -07:00
htang156
3bfe4cdb4f
Added END and other keymap file formatting.
2017-04-16 14:19:51 -07:00
htang156
1bab72383c
Added DEL and F1 to F12 keys
2017-04-16 14:10:29 -07:00
htang156
ccabf70aeb
Added keymap commets to default layout.
2017-04-16 13:40:03 -07:00
jpetermans
046f1baf30
more stable lock led process, added debugging code
2017-04-15 14:37:55 -07:00
dbroqua
b133b74897
- Added S-60-X RGB directory (based on qmk.sized.io work)
2017-04-15 16:34:33 +02:00
jpetermans
c0ec1756af
Added backlight step functionality
2017-04-14 18:20:12 -07:00
Adam YH Lee
a9f4596062
Add TAB, N, LSFT on Layer 2
2017-04-14 00:02:25 -07:00
Adam YH Lee
f076f16e13
Add KC_T on Layer 2
2017-04-13 23:50:57 -07:00
Adam YH Lee
4810a4a812
Add LCTL + L on Layer 2
2017-04-13 23:47:50 -07:00
Thomas Fitzsimmons
bc7b1843ba
Fix KEYMAP_YORUIAN macro
...
Fix the ordering of the arguments to the KEYMAP macro.
2017-04-14 02:06:58 -04:00
jpetermans
ec1e936dfb
fixed bit shift in led_set_bit
2017-04-13 17:51:37 -07:00
jpetermans
1b1adf35bb
more flexible led processing functions, all and on/off/toggle
...
functioning
2017-04-13 17:15:24 -07:00
Fred Sundvik
94b14bdd6a
Add missing serial_link.h include
...
Which fixes a warning when building Ergodox Infinity as a righthand
master.
2017-04-13 23:00:27 +03:00
Adam YH Lee
f90321bdcb
Update keymap - hopefully more usable
2017-04-13 09:25:05 -07:00
Fred Sundvik
08b9eb26c5
Fix warnings in CMD-Preonic
...
The startup_sound is defined using MUSICAL_NOTEs, since non-constant
initializer expressions are not allowed in C.
2017-04-13 16:00:29 +03:00
Fred Sundvik
a619b93e38
Fix warnings in planck/lucas keymap
...
Register the unshifted version DE_LESS, rather than the shifted DE_MORE
2017-04-13 16:00:29 +03:00
Fred Sundvik
df30d18458
Fix warnings in kitten_paw/ickerwx keymap
2017-04-13 16:00:29 +03:00
Fred Sundvik
bbe8876c8d
Rename MS-sculpt-mobile to MS_scuplpt_mobile
...
Subprojects with "-" have problems, since the build system creates
a define containing the subproject name, and "-" is illegal in
macro names.
2017-04-13 16:00:29 +03:00
Fred Sundvik
738b8d2b9c
Add SKIP_VERSION option to speed up compilation
2017-04-13 16:00:29 +03:00
Fred Sundvik
e950d4e12f
Fix frosty_flake warning when print is disabled
2017-04-13 16:00:29 +03:00
Fred Sundvik
2d1528c69f
Fix keymap yoruian on Infinity
2017-04-13 16:00:29 +03:00
Fred Sundvik
12159e782c
Fix overflow warning in ordinary keymap
2017-04-13 16:00:29 +03:00
Fred Sundvik
db6d7207b5
Fix overflow warnings in dvorak_programmer
2017-04-13 16:00:29 +03:00
jpetermans
15635817b5
Updated lock led init
2017-04-12 23:32:38 -07:00
Adam YH Lee
dddbcc2af3
Replace double quote with comma
2017-04-12 22:11:08 -07:00
Adam YH Lee
592ff53e41
Enable RGB Animation
2017-04-12 21:19:00 -07:00
Adam YH Lee
73625a603a
Merge branch 'master' into miuni32-OA
2017-04-12 20:58:36 -07:00
Johannes Larsson
835adb7848
colemak layout maybe
2017-04-12 23:11:51 +02:00
Jack Humbert
d3301c0f8b
Merge pull request #1220 from joedevivo/master
...
mimic atreus firmware defaults
2017-04-12 15:42:46 -04:00
Jack Humbert
456570efa4
Merge pull request #1212 from Xyverz/master
...
atreus keymap overhaul
2017-04-12 12:46:08 -04:00
Jack Humbert
30ad505dd0
Merge pull request #1213 from nstickney/master
...
ErgoDox Familiar layout
2017-04-12 12:45:45 -04:00
Jack Humbert
0de2597f7c
Merge pull request #1216 from Khord/master
...
Added breathing macros/mappings and removed mappings to unused layouts
2017-04-12 12:45:03 -04:00
Jack Humbert
b7f1ea967a
Merge pull request #1222 from kamisamamizu/patch-1
...
Fixed position of BSLS and BSPC on the xd60
2017-04-12 12:44:11 -04:00
kamisamamizu
446b34edec
Fixed position of BSLS and BSPC
...
They were in the incorrect positions before.
2017-04-12 12:18:38 +02:00
Adam YH Lee
91b11bb4dd
Update default layout
...
This is a 2U Spacebar layout. Spacebar is between V and B.
Issue:
- RGB MOD does not seem to do anything
2017-04-12 01:12:16 -07:00
jpetermans
0881f2dbfa
fixed write_led_page col shift, added option for lock led display
2017-04-11 23:33:48 -07:00
jpetermans
d8e9c183be
led init code missing pwm writes for Frame 1
2017-04-10 22:23:45 -07:00
jpetermans
dda858c437
revised led controller code to allow for more options
...
unable to switch picture displays
2017-04-10 17:36:47 -07:00
Joe DeVivo
dc96fa24e4
mimic atreus firmware defaults
2017-04-10 17:19:27 -07:00
Fred Sundvik
65b7bf6878
Extract Ergodox default visualizer into simple_visualizer
...
It's good enough if you only want to change the lcd text and color.
2017-04-09 18:34:59 +03:00
Fred Sundvik
c5d2b7ff16
Rename led test to led_keyframes and move animation to Ergodox
2017-04-09 18:34:59 +03:00
Fred Sundvik
306353bf06
Create a file for shared Ergodox Infinity animations
2017-04-09 18:34:59 +03:00
Fred Sundvik
c6ca996f4e
Combine startup and resume animations
2017-04-09 18:34:59 +03:00
Fred Sundvik
ed1710589f
Fix suspend not disabling backlight
2017-04-09 18:34:59 +03:00
Fred Sundvik
3074269c4a
Move the logo drawing keyframe to lcd_keyframes
2017-04-09 18:34:59 +03:00
Fred Sundvik
df67169d42
Move LCD logo to visualizer resources
2017-04-09 18:34:59 +03:00
Fred Sundvik
3eb8785e87
Add automatic flush for the LCD screen
2017-04-09 18:34:59 +03:00
Fred Sundvik
995002fa91
LCD initialization sequence according to the docs
...
The LCD initialization show now be much better and faster with no
flickering at the startup.
Also fix the contrast control.
2017-04-09 18:34:59 +03:00
Fred Sundvik
3994fb1e79
Yet another try to fix the LCD corruption
...
It turns out that the ChibiOS K20 SPI driver doesn't handle the
chip select, so it needs to be done manually. Acquiring the bus is
not enough since the pin was in the wrong mode. This is now fixed.
Also increase the frequency of the SPI from around 200kHz to nearly
20 Mhz.
2017-04-09 18:34:59 +03:00
Fred Sundvik
b7041d06ae
Move common visualizer keyframes into visualizer_keyframes.h
2017-04-09 18:34:59 +03:00
Fred Sundvik
64d63ab422
Remove the need to manually enable the visualizer
2017-04-09 18:34:59 +03:00
Fred Sundvik
1e7585e767
Separated backlight and LCD disable/enable
...
Also moved them to correct places
2017-04-09 18:34:59 +03:00
Fred Sundvik
5ba228b684
Move LCD backlight keyframes to its own file
2017-04-09 18:34:59 +03:00
Fred Sundvik
5815c5d317
Move LCD keyframes to its own file
2017-04-09 18:34:59 +03:00
Fred Sundvik
05bc4880dd
Tweaks to the Ergodox default visualizer
...
No animation, display led statuses and layer name on the same screen
Don't display layer bitmap
Fully saturated colors for caps, less saturated ones normally
2017-04-09 18:34:59 +03:00
Fred Sundvik
fa6da78ff3
Simple layer display on Infinity Ergodox default layout
2017-04-09 18:34:59 +03:00
Fred Sundvik
65e8127c91
Add visualizer for Ergodox default
2017-04-09 18:34:59 +03:00
Fred Sundvik
5fbaf31dc2
Brightness for Ergodox Infinity emulated LEDs
2017-04-09 18:34:59 +03:00
Fred Sundvik
39385144e7
Emulate Ergodox EZ leds by LCD colors
2017-04-09 18:34:59 +03:00
Fred Sundvik
9a4ce28683
Display layer bitmap and keyboard led states on the LCD
2017-04-09 18:34:59 +03:00
Fred Sundvik
951b6f33a0
CIE 1931 for the LCD backlight
2017-04-09 18:34:59 +03:00
Fred Sundvik
f113f95440
Move CIE1931 and breathing tables to its own file
2017-04-09 18:34:59 +03:00
Fred Sundvik
bc97413bf7
Disable LEDs on Infinity Ergodox
2017-04-09 18:34:59 +03:00
Fred Sundvik
e6f7a8a47a
Display QMK logo at startup of Infinity Ergodox
2017-04-09 18:34:59 +03:00
Fred Sundvik
a8f5897b97
Add support for blitting to the Infinity LCD
2017-04-09 18:34:59 +03:00
Fred Sundvik
2b24d35846
Hopefully finally fix the corrupt LCD
...
The SPI bus is now selected and deselected before each set of commands.
Also speed up things by buffering many commands into a single batch.
2017-04-09 18:34:59 +03:00
Fred Sundvik
f5c8941652
UGFX is compiled once per keyboard instead of keymap
2017-04-09 18:34:59 +03:00
Fred Sundvik
bb86be1f1f
Remove unneeded makefile include
2017-04-09 18:34:59 +03:00
Fred Sundvik
aee9b10e92
Add a keyboard specific visualizer
2017-04-09 18:34:59 +03:00
Dylan Khor
a875299d9a
Added breathing macros and removed mappings to unused layouts
2017-04-09 02:02:40 -04:00
Xyverz
a11053bda8
Cleaned up the keymap:
...
Added MOD_TAP aliases for keymap.c readability.
Updated README to document said changes.
Added additional Dvorak layer to make using the CMD key easier on Macs.
2017-04-08 22:53:46 -07:00
Xyverz
9237b95ebe
More missed keycodes; added PSCR, SLCK, and PAUS to ADJUST layer.
2017-04-07 19:42:05 -07:00
Xyverz
6b0842760b
Corrected a missed typo in the readme.
2017-04-07 19:23:27 -07:00
jpetermans
a2ac883779
add ability to toggle individual led by address
2017-04-07 15:58:17 -07:00
Stick
bcf70c0203
ErgoDox Familiar layout v1
2017-04-07 16:04:43 -05:00
Xyverz
3607522c12
More tweaks to keymap and readme.
2017-04-06 22:26:13 -07:00
Xyverz
303bc6999e
Merge remote-tracking branch 'upstream/master'
2017-04-06 22:07:34 -07:00
Xyverz
8813365ec5
Added readme
2017-04-06 22:03:17 -07:00
Xyverz
3a5f9faca9
Reworked Atreus keymap, added README
2017-04-06 22:02:38 -07:00
jpetermans
af13e9a12d
Moved led page arrays to keymap.c and added keymap header to define
...
individual led addresses
2017-04-06 16:27:51 -07:00
jpetermans
d89114400c
Small keymap tweak and clean up.
2017-04-06 15:22:13 -07:00
jpetermans
56be300757
Add Kinetis_i2c settings consistent with whitefox mcuconf
2017-04-06 14:23:14 -07:00
jpetermans
91f2e9fb5e
match hal settings to whitefox, fix make rules
2017-04-06 13:53:18 -07:00
jpetermans
02ef122cbb
Add led_controller.h to user keymap.c
2017-04-06 13:51:33 -07:00
jpetermans
f66361d678
add led init function to header for use in keymap.c
2017-04-06 13:48:31 -07:00
jpetermans
da4c2d2e3e
Adjust led_controller.c matrix sttings and init function
2017-04-06 13:46:54 -07:00
jpetermans
b73c935d36
Added tmk whitefox led files
2017-04-06 13:45:15 -07:00
jpetermans
dfb0a512a0
Added personal configs and keymap to infinity60/keymaps
2017-04-06 13:43:22 -07:00
Stick
7e38541124
Merge remote-tracking branch 'upstream/master'
2017-04-06 13:52:53 -05:00
Adam Lee
8e7be3adda
Set Bootloader Size to 4K
...
Use Atmel's default bootloader size, rather than Teensy 2.0's [1].
[1] https://github.com/qmk/qmk_firmware/pull/1207#discussion_r109712786
2017-04-04 10:21:32 -07:00
Adam YH Lee
236826e7c1
Merge branch 'miuni32-OA'
2017-04-03 20:36:13 -07:00
Adam YH Lee
e18768aa77
Add B1gtuna Miuni32
...
Miuni32 is a 30% ortholinear board.
Please visit www.bigtuna.io for more information.
2017-04-03 20:34:10 -07:00
Jack Humbert
d75a44a02b
Merge pull request #1206 from Dan-Saunders/patch-2
...
Create twolayer.c
2017-04-03 21:13:29 -04:00
Jack Humbert
27aa185222
Merge branch 'master' into master
2017-04-03 21:06:40 -04:00
Stick
bee9183e7f
Merge remote-tracking branch 'upstream/master'
2017-04-03 16:59:27 -05:00
Dan Saunders
1454d466e7
Create twolayer.c
...
fixed issue where Default.c "function key" does not work (actually it's changing my LED steps). Changed layout to be more user friendly for people that use the standard spacebar milled top plate.
2017-04-03 15:14:45 -06:00
Jack Humbert
3ac9259742
Merge pull request #1204 from nooges/lets-split-fixes
...
Let's split fixes
2017-04-03 16:17:55 -04:00
Danny Nguyen
fbd9d04559
Include use of either TRS or TRRS
2017-04-03 16:16:46 -04:00
Erez Zukerman
13c882a1fb
disables space cadet rollover
2017-04-03 15:11:42 -04:00
Danny Nguyen
ed9c18e866
Remove flip-half from keymap
2017-04-03 14:00:33 -04:00
Danny Nguyen
133ed52466
Update Let’s Split readme
2017-04-03 13:24:20 -04:00
Danny Nguyen
e3aeab356a
Move SSD1306 function declarations to header file
2017-04-03 13:24:20 -04:00
Danny Nguyen
d90ac76295
Move defines for RGB to after the config.h include
2017-04-03 13:24:20 -04:00
Danny Nguyen
563961328b
Rename COMPACT_KEYMAP to KC_KEYMAP and move to lets_split.h
2017-04-03 13:24:20 -04:00
Danny Nguyen
d0cfaba6d2
Revise KEYMAP macro to make left and right halves more clear
2017-04-03 13:24:11 -04:00
ishtob
4e51c1e3ca
Update ssd1306.c
2017-04-03 13:17:41 -04:00
Danny Nguyen
48f4c5997b
Move defines for RGB to after the config.h include
2017-04-03 12:06:28 -04:00
Danny Nguyen
344ebbac43
Revert removal of avrdude make option
2017-04-03 11:32:54 -04:00
Jack Humbert
da53f3a529
Merge pull request #1194 from tong92/master
...
Adds tong92's keymap to tv44
2017-04-02 22:30:11 -04:00
Jack Humbert
8b3fa01667
Merge pull request #1195 from fudanchii/kbod
...
Handwired 60% keyboard with 8x8 matrix
2017-04-02 22:29:54 -04:00
Jack Humbert
ef4a7a0aa0
Merge pull request #1196 from Dbroqua/master
...
GH60 - MX HHKB with 7U spacebar
2017-04-02 22:29:24 -04:00
Xyverz
c034b61b1a
Merge remote-tracking branch 'upstream/master'
2017-04-02 14:49:39 -07:00
Xyverz
7873046479
removed my handwired boards to a new branch.
2017-04-02 14:48:33 -07:00
Damien
3e41cde9f9
Merge pull request #19 from qmk/master
...
Merge from qmk
2017-04-02 23:29:12 +02:00
dbroqua
e7347ff0de
Merge remote-tracking branch 'origin/master'
2017-04-02 23:27:57 +02:00
dbroqua
9e72b7e7e9
- Added MX HHKB like for gh60 with 7u space bar
2017-04-02 23:25:26 +02:00
Nurahmadie
649d08742a
Use tap-toggle to move between layers.
...
- Add PDOT key
2017-04-02 18:27:28 +07:00
Nurahmadie
15ddaa7f19
Fix layer stuck, and add numpad support
2017-04-02 18:27:28 +07:00
Nurahmadie
f5d78c739d
Forgot semicolon, and add reference link
2017-04-02 18:27:28 +07:00
Nurahmadie
10105f645a
Add README
2017-04-02 18:27:28 +07:00
Nurahmadie
c9dd11d5ab
Enable alt-F4 without [Fn]
...
- Add led indicator when keymap not on base layer \o/
2017-04-02 18:27:28 +07:00
Nurahmadie
af7430b896
Add capslock led, and audio buttons
...
- Also change layer switch to momentary
2017-04-02 18:27:28 +07:00
Nurahmadie
7614c6b7a7
Remove lead keys, fix some typos, rearrange layers
2017-04-02 18:27:28 +07:00
Nurahmadie
8b206e1e75
Add initial keymap
...
*crossfingers*
2017-04-02 18:27:28 +07:00
Nurahmadie
f8ed4ed573
Initial work for my kbod support in qmk_firmware
...
- Wiring layout done
No actual keymap yet
2017-04-02 18:27:27 +07:00
=
e508b5e04e
Adds tong92's keymap to tv44
2017-04-02 18:27:24 +09:00
coderkun
049f906b5e
Fix keymap “coderkun_neo” to use LALT instead of RALT
2017-04-01 12:17:41 +02:00
coderkun
021edb6ec6
Add several Unicode symbols to keymap “coderkun_neo2”
2017-04-01 12:06:27 +02:00
coderkun
c74f47555c
Add keymap diagrams to readme of keymap “coderkun_neo2”
2017-04-01 11:15:20 +02:00
coderkun
605c4129cc
Merge branch 'master' into coderkun_neo2
2017-04-01 10:56:29 +02:00
nielsenz
d1e66e2e07
Worked around some new Makefile issues.
2017-03-30 20:10:34 -07:00
Callum Oakley
b9225a28f2
changed hotkey cluster to accomodate awkward software... again
2017-03-30 19:08:15 -07:00
Callum Oakley
200ae0c519
changed hotkey cluster to accomodate awkward software
2017-03-30 19:08:15 -07:00
Xyverz
571f39da66
Tidied up keymaps, Makefiles that actually work, Clueboard make v1.0
2017-03-29 22:32:39 -07:00
Zay950
2366ebfbbd
Merge branch 'master' into to_push
2017-03-29 12:00:38 -07:00
Jack Humbert
942f2ccee4
Merge pull request #1183 from Rovanion/real-master
...
Added instructions for how to build and flash the firmware with teensy_cli
2017-03-29 09:45:22 -04:00
Rovanion Luckey
d6e51d2008
Added link to the teensy linux page.
2017-03-29 09:34:20 +02:00
Jack Humbert
b83ae5ae5c
Merge pull request #1182 from henxing/default_atreus_layout
...
Default atreus layout
2017-03-28 14:12:41 -04:00
Ole Anders
6de7e5d8dc
typo removed {3 ...
2017-03-28 18:45:26 +02:00
Ole Anders
85cac39529
fixed capitalization issue (checkTime => checktime)
2017-03-28 18:41:04 +02:00
Hugh Enxing
3fdc45b4e9
Merge branch 'master' into default_atreus_layout
2017-03-28 12:11:49 -04:00
Ole Anders
411cd4fae2
moved checktime out of function
2017-03-28 17:30:15 +02:00
Ole Anders
f504082f7f
declaring checktime before the function it is used in.
2017-03-28 17:17:08 +02:00
Ole Anders
256abc64d5
fixed function to not accept any arguments.
...
As per Pramod's comment on stack overflow:
In C int foo() and int foo(void) are different functions. int foo()
accepts an arbitrary number of arguments, while int foo(void) accepts 0
arguments. In C++ they mean the same thing. I suggest that you use void
consistently when you mean no arguments.
2017-03-28 17:08:01 +02:00
Ole Anders
1b821eca66
removed varable trace option from makefile
2017-03-28 16:55:25 +02:00
Ole Anders
37b7539af3
slight cleanup as per recommendation
2017-03-28 16:52:56 +02:00
Ole Anders
c72ca58528
Moved key_timer out of function.
2017-03-28 16:50:44 +02:00
Ole Anders
48dfc77718
removed a carriage return
2017-03-28 15:58:46 +02:00
Ole Anders
62faa20ef6
Merge remote-tracking branch 'refs/remotes/qmk/master'
2017-03-28 15:55:33 +02:00
Ole Anders
d5ee0194ab
fixed #1139 issues
...
A fix described by jackhumbert has been sorted out now.
2017-03-28 15:43:04 +02:00
Jack Humbert
5e4daf1c6d
Merge pull request #1174 from nooges/atreus50
...
Add Atreus50 keyboard
2017-03-28 09:34:26 -04:00
Jack Humbert
7e37daa2ce
Merge pull request #1112 from newsboytko/newsboytko/midi-keycodes
...
Flesh out MIDI support
2017-03-28 09:26:54 -04:00
Jack Humbert
cc2fb56ed8
Merge pull request #1167 from smt/smt/satan
...
Add smt keymap for Satan 'GH60'
2017-03-28 09:18:55 -04:00
Jack Humbert
fa09189195
Merge pull request #1162 from Khord/master
...
My customized keymap + some tunes for the song list
2017-03-28 09:17:16 -04:00
Danny Nguyen
71857ebc3f
Move Atreus50 to hardwired directory and update README
2017-03-28 09:17:09 -04:00
Jack Humbert
6e688ad5c2
Merge pull request #1172 from nooges/hexwire-fixes
...
Let's Split hexwire keymap fixes
2017-03-28 09:16:47 -04:00
Jack Humbert
99b7b50130
Merge pull request #1157 from jtbarrett/tada68_default
...
Update readme and default layout for TADA68
2017-03-28 09:15:57 -04:00
Jack Humbert
c948404739
Merge pull request #1180 from mattdibi/master
...
Italian layout for ergodox keyboard
2017-03-28 09:14:03 -04:00
Jack Humbert
8a0cf32cf5
Merge pull request #1171 from ishtob/master
...
SSD1306 I2C OLED display support for let's split
2017-03-28 09:13:41 -04:00
Jack Humbert
0f986a1951
Merge pull request #1168 from newsboytko/newsboytko/frosty-flake
...
Support Frosty Flake Controller (CM Storm QFR)
2017-03-28 09:10:55 -04:00
Jack Humbert
a7811781c5
Merge pull request #1178 from cheesemacfly/master
...
XD60 different layout
2017-03-28 09:10:02 -04:00
Jack Humbert
417202109b
Merge pull request #1163 from jprMesh/atreus62_KC_KEYMAP
...
Added KC_KEYMAP macro for old style keymaps in Atreus62
2017-03-28 09:09:35 -04:00
mattdibi
2104900030
Removed images from ergodox ez italian layout
2017-03-28 10:19:25 +02:00
mattdibi
221b27c508
Fixed layout title in ergodox ez italian keymap
2017-03-28 10:15:18 +02:00
mattdibi
b9b9a59f22
Fixed italian kymap readme
2017-03-28 10:13:29 +02:00
mattdibi
512eb5e1d5
Updated readme
2017-03-28 10:10:24 +02:00
mattdibi
b6b85ed413
Added italian layout
2017-03-28 09:56:07 +02:00
Stick
b6280d0cac
unsatisfied with ESC/GRV/TAB positioning
2017-03-27 21:56:47 -05:00
Stick
a47e916635
Merge remote-tracking branch 'upstream/master'
2017-03-27 21:19:36 -05:00
Stick
a03d946d0c
fixed unicode input issue
2017-03-27 21:18:12 -05:00
Nicolas Guelpa
a32436d5a1
Create README.md
2017-03-26 15:20:44 -04:00
Nicolas Guelpa
a89ee25db8
Add files via upload
2017-03-26 15:16:55 -04:00
Nicolas Guelpa
c0a6c5f806
fixing layout
2017-03-26 15:07:19 -04:00
Nicolas Guelpa
739249ff0d
Adding different layer
2017-03-24 20:18:59 -04:00
Hugh Enxing
25f2295ba8
Swapped placement of Ctrl and Alt keys to match Technomancy's
...
default layout
2017-03-24 14:31:02 -04:00
Danny Nguyen
8775a13658
Add RGB support
2017-03-23 14:46:58 -04:00
Danny Nguyen
63e47a6425
Add RGB support for Let’s Split v1
2017-03-23 12:23:20 -04:00
Danny Nguyen
0520341ce4
Cleanup keymap
2017-03-23 11:31:07 -04:00
Danny Nguyen
edfb50ea56
Initial commit for Atreus50 with working audio
2017-03-23 09:42:32 -04:00
Danny Nguyen
e5c5902e95
Move keymap into config file
2017-03-23 08:51:29 -04:00
Danny Nguyen
f3e3ff29a3
Add Makefile in keymap dir
2017-03-23 08:46:35 -04:00
Danny Nguyen
91776772fd
Remove line for hands selection via EEPROM, reduce tap duration from 200ms to 150ms
2017-03-23 08:46:35 -04:00
ishtob
2573e581a5
Update readme.md
2017-03-22 15:56:45 -04:00
ishtob
d5f56e91e4
Update i2c.c
2017-03-22 15:50:52 -04:00
ishtob
bb413383ee
Update i2c.c
2017-03-22 15:50:18 -04:00
ishtob
092416325b
Update i2c.c
2017-03-22 15:49:21 -04:00
ishtob
be0cfbb97e
Update i2c.c
2017-03-22 15:48:56 -04:00
ishtob
732a7f2be9
Update matrix.c
2017-03-22 15:47:53 -04:00
ishtob
ebb46694e5
Update split_util.c
2017-03-22 15:45:45 -04:00
ishtob
1f7b8a0343
Update matrix.c
2017-03-22 15:45:15 -04:00
ishtob
d1865db599
OLED code cleanup
2017-03-22 15:19:01 -04:00
ishtob
80270a2791
Add files via upload
2017-03-22 15:14:33 -04:00
ishtob
30f4507492
OLED code cleanup
2017-03-22 15:11:03 -04:00
ishtob
65317a3a02
Added OLED SSD1306 support to I2C
2017-03-22 15:04:11 -04:00
ishtob
423c68c210
Merged Fliphalf, now defined in config, added OLED
...
Can now use the following in the keymap config.h to call the flipped matrix
```
#define FLIPHALF
```
2017-03-22 15:02:49 -04:00
ishtob
3a7083d810
Delete rules.mk
2017-03-22 15:00:00 -04:00
ishtob
a4bdd6d084
Delete rev2fliphalf.h
2017-03-22 14:59:54 -04:00
ishtob
d012b01108
Delete rev2fliphalf.c
2017-03-22 14:59:42 -04:00
ishtob
6167d7937c
Delete config.h
2017-03-22 14:59:32 -04:00
ishtob
dfb5a0e8f4
Delete Makefile
2017-03-22 14:59:20 -04:00
ishtob
f0962bce50
Add files via upload
2017-03-22 14:55:13 -04:00
skullY
7a9437a2e3
Fix a typo
2017-03-21 22:24:34 -07:00
skullY
452949f913
Add #1170 to all the clueboard keymaps
2017-03-21 22:06:47 -07:00
tengg
3cba7a43d9
typo fixed
2017-03-22 00:33:44 -04:00
tengg
a89998b977
fix typo
2017-03-22 00:28:59 -04:00
tengg
9e0ca927f9
fixed a bug related to mod + Grave with combined ESC/Grave key
...
This only applies to keymaps that has combined esc/grave. Here we call it theKEY.
Think about the motion when we do shift + theKEY (typing ~), or CMD + theKEY (switching window on MAC). Based on the original code, we must do following sequence: press shift -> press theKEY -> release theKEY -> release shift. However, it is very possible and natural that we do this stroke sequence instead: press shift -> press theKEY -> release shift -> release theKEY.
If we do the 2nd stroke sequence, the code will del_key(ESC) instead of (GRV) when we release theKEY. This caused some inconvenient issues and ghost typing.
By adding a flag, this issue is eliminated and will not affect any other functions.
2017-03-22 00:03:30 -04:00
Stephen Tudor
dce3847ebb
Use single _FUNC layer. Move RESET and base layout-changing keys to _FUNC.
2017-03-20 14:12:43 -04:00
Dylan Khor
0ec07ddc1c
Merge branch 'master' of https://github.com/Khord/qmk_firmware
2017-03-20 13:16:19 -04:00
Dylan Khor
d7f2bd2964
add pgup, pgdn, home, end
2017-03-20 13:14:48 -04:00
Stephen Tudor
34c5f8094e
Remove tap-dance. Raise will be accessed via holding shift while lower is active
2017-03-20 07:43:45 -04:00
Stephen Tudor
b10d950708
Use normal backtick in ESC spot - I've mapped ESC to caps lock
2017-03-20 07:43:24 -04:00
Stephen Tudor
3399e39297
Fix shift tap-dance (can't use one-shot layer)
2017-03-20 07:26:28 -04:00
Gabriel Young
b37f510f32
clean up config
2017-03-19 21:19:05 -07:00
Gabriel Young
a3a304db9a
clean up docs and provide defaults for keymap
2017-03-19 21:11:17 -07:00
Gabriel Young
db2da37561
update docs
2017-03-19 20:56:45 -07:00
Gabriel Young
df874a228a
fix whitespace
2017-03-19 20:46:56 -07:00
Gabriel Young
7e9ca9a976
support LEDs
2017-03-19 20:45:10 -07:00
Gabriel Young
a43ae7c92f
Swap rows and columns to match the schematic
2017-03-19 20:34:53 -07:00
Gabriel Young
4a97ef6c48
start to define keymap; annoying because rows and columns are swapped from schematic
2017-03-19 19:55:55 -07:00
Gabriel Young
d7fc236540
successfully read data from the matrix
2017-03-19 15:59:21 -07:00
Dylan Khor
561da65606
Missing comma
2017-03-19 00:14:43 +00:00
Dylan Khor
ca544ecfb6
Don't feel like tap dancing arrows anymore
2017-03-19 00:07:48 +00:00
Gabriel Young
19fd20261b
sketch out frosty flake matrix using custom matrix.c based on kitten paw
2017-03-18 16:19:10 -07:00
Gabriel Young
3766f902a0
boilerplate project created with new_project.sh
2017-03-18 15:38:03 -07:00
jprmesh
e123ed8d5f
Added KC_KEYMAP macro for old style keymaps in Atreus62
2017-03-17 09:23:55 -04:00
Dylan Khor
e03ddbe118
tap dance working for esc and arrows
2017-03-16 18:13:53 +00:00
Dylan Khor
4b1d0c5859
remove const
2017-03-16 17:36:31 +00:00
Dylan Khor
c7cddfc539
test td changes
2017-03-16 13:27:26 -04:00
Dylan Khor
6ca1c49d38
test fixes for tap dane
2017-03-16 13:07:01 -04:00
Dylan Khor
0c8f71e3c7
test tap dance
2017-03-16 12:44:56 -04:00
Dylan Khor
24d1745951
add config.h for customization
2017-03-16 12:24:31 -04:00
Jack Humbert
c36a4496eb
Update config.h
2017-03-15 23:51:56 -04:00
Jack Humbert
c043d1cc47
Update config.h
2017-03-15 23:49:38 -04:00
Dylan Khor
0c0a8ee187
test
2017-03-16 03:46:26 +00:00
Dylan Khor
73a70a2c1c
Add Makefile
2017-03-15 23:09:17 -04:00
Dylan Khor
cf28f7bfda
Add custom keycap
2017-03-15 23:07:29 -04:00
Jack Humbert
b794719952
Merge pull request #1090 from qmk/backlight_softpwm
...
Adds soft PWM backlight for non-timed ports
2017-03-15 11:17:07 -04:00
Jack Humbert
ce6dcc2b5d
Merge pull request #1146 from khogeland/master
...
Colemak layout for Clueboard
2017-03-15 11:13:16 -04:00
Jack Humbert
71d6d7b22c
Merge pull request #1147 from nooges/numpad20
...
Add handwired 20-key Numpad
2017-03-15 11:12:52 -04:00
Jack Humbert
8c184847f7
Merge pull request #1150 from nooges/ortho5x13
...
Add handwired 5x13 ortholinear keyboard
2017-03-15 11:12:30 -04:00
Jack Humbert
8685d73893
Merge pull request #1148 from nooges/hexwire-lets-split
...
Add Hexwire layout for Let's Split
2017-03-15 11:12:01 -04:00
Jack Humbert
09ee922a63
Merge pull request #1155 from deadcyclo/master
...
Worked on deadcyclo layout
2017-03-15 11:11:35 -04:00
Jack Humbert
b4a3e5ebea
Merge pull request #1145 from smt/smt/lets_split
...
Add smt keymap for Let's Split (based on serial)
2017-03-15 11:00:06 -04:00
Jack Humbert
3554b93cbd
Merge pull request #1144 from milestogo/sculpt2
...
Microsoft sculpt mobile handwire and new shortcuts macro library
2017-03-15 10:59:34 -04:00
Jack Humbert
2e34d4bd85
update for infinity
2017-03-15 10:57:24 -04:00
Danny Nguyen
52ea58805a
Add RGB underglow, move keys to allow Adjust layer to be reached
2017-03-14 09:51:48 -04:00
nstickney
d9efa02cfb
added README.md
2017-03-12 22:43:44 -05:00
nstickney
1753c9383e
Merge remote-tracking branch 'upstream/master'
2017-03-12 14:51:43 -05:00
nstickney
9895e376e7
added US-International support
2017-03-12 14:51:33 -05:00
James Barrett
96bde794d8
Update readme and default layout for TADA68
...
Add the default function layer mappings for the keyboard.
Provide flashing instructions in the readme.
2017-03-11 22:09:50 -08:00
Brendan Johan Lee
0d71e631ed
[deadcyclo layout] fix an error in layer illustration
2017-03-11 12:27:46 +01:00
Brendan Johan Lee
e66b31a648
[deadcyclo layout] Added second unicode layer, more sane layer switches
2017-03-11 12:22:38 +01:00
Dennis Trümper
e3f934ed91
remove typo from folder name
2017-03-11 12:09:30 +01:00
Dennis Trümper
edb8fcc810
update documentation
2017-03-11 11:44:39 +01:00
Dennis Trümper
303f5aed41
change layer 3 on right thumb back to layer 1
2017-03-11 10:31:22 +01:00
Dennis Trümper
f75c7266a3
working but some documentation needed
2017-03-11 00:02:39 +01:00
Stephen Tudor
b19e34c81e
Forsake spacefn in favor of left shift tapdance. Move media controls.
2017-03-10 16:10:05 -05:00
Stephen Tudor
5ae0cfeef5
Add smt keymap for Satan 'GH60'
2017-03-09 13:58:33 -05:00
Danny Nguyen
20a48e0198
Add handwired 5x13 ortholinear keyboard
2017-03-09 12:02:05 -05:00
Danny Nguyen
a8f872e728
Initial commit for handwired numpad
2017-03-09 10:11:39 -05:00
Danny Nguyen
3df35f712e
Add readme for layout
2017-03-09 09:52:33 -05:00
Danny Nguyen
74c6c3d277
Convert keymap to compact version
2017-03-09 09:33:21 -05:00
Danny Nguyen
718b964806
Add hexwire layout for Let’s Split
2017-03-09 09:31:46 -05:00
Kevin Hogeland
06e4b3fe1a
Colemak layout for Clueboard
2017-03-09 02:50:23 -08:00
nstickney
ce0b8ea676
Merge remote-tracking branch 'upstream/master'
2017-03-08 22:29:12 -06:00
nstickney
82cbe71bb5
found LT(layer, kc) so I could take out TapDance code
2017-03-08 22:28:18 -06:00
Stephen Tudor
8d4bc714e4
Update smt keymap READMEs
2017-03-08 23:16:58 -05:00
Erez Zukerman
7c7a77d4bf
Tweaks keymap to reset on boot
2017-03-08 19:43:10 -05:00
milestogo
feb858c5a9
Merge branch 'master' into sculpt2
2017-03-08 15:51:30 -08:00
milestogo
b5bfb5104b
docs for babblepaste
2017-03-08 15:48:39 -08:00
Jack Humbert
bfa7e6ce04
Merge pull request #1137 from Skrymir/patch-1
...
Fixed minor error in ergodox infinity section.
2017-03-08 18:37:30 -05:00
Jack Humbert
8d81667fbe
Merge pull request #1138 from nooges/magicforce68
...
Add Handwired Magicforce68
2017-03-08 18:37:09 -05:00
Jack Humbert
85121ec50e
Merge pull request #1142 from guni77/my_keymap
...
My keymap
2017-03-08 18:35:37 -05:00
nstickney
fa44e8d4dc
corralled image files
2017-03-08 16:26:45 -06:00
Stephen Tudor
88e862e472
Update smt keymaps for consistency
2017-03-08 16:00:23 -05:00
Lukas Stiebig
34fa8fd5d3
readme
...
Added a readme.md file for the keymap german-lukas.
2017-03-08 21:14:16 +01:00
Lukas Stiebig
2f5143e219
Corrected the description of the layer
...
Corrected the description of the Shortcuts layer.
2017-03-08 21:09:51 +01:00
Lukas Stiebig
8cc70f4d9d
Added german-lukas
...
Added my keymap called germman-lukas.
2017-03-08 20:58:55 +01:00
Gunther Gruber
cd1eb8d246
added readme file
2017-03-08 11:13:19 +01:00
milestogo
89aba30c7f
fix stupid error w/ mode switch
2017-03-08 01:25:33 -08:00
Anand Babu (AB) Periasamy
b20106d238
Replace enter with quote and few reorgs
2017-03-08 01:12:12 -08:00
milestogo
01980c96e9
added browser babble, removed code from keymap
2017-03-08 01:06:25 -08:00
nstickney
29e7003fc2
SLASH and WHACK functions added (based on algernon's CT_TA)
2017-03-07 22:31:14 -06:00
nstickney
4880e72b77
SLASH and WHACK functions added (based on algernon's CT_TA)
2017-03-07 22:30:43 -06:00
Danny Nguyen
3d082382b2
Fix function layer actions
2017-03-07 23:08:44 -05:00
Danny Nguyen
7042af7020
Add Makefile
2017-03-07 23:06:41 -05:00
nstickney
eab0166f83
Merge remote-tracking branch 'upstream/master'
2017-03-07 19:09:56 -06:00
Ole Anders
1968ec4c24
changed definitions on keymap.c in admiral strokers
...
Made a few changes to my own keymaps. (organisation)
2017-03-07 19:40:18 +01:00
Ole Anders
25a7c94174
Merge remote-tracking branch 'refs/remotes/qmk/master'
2017-03-07 19:39:00 +01:00
Danny Nguyen
38a83700c3
Update description
2017-03-07 12:29:48 -05:00
Danny Nguyen
2cd2ac02d1
Add readme file
2017-03-07 12:20:52 -05:00
Danny Nguyen
f3aef727e1
Set pinout and layout
2017-03-07 12:20:52 -05:00
Danny Nguyen
6ee823a821
Add rule for flashing microcontroller using avrdude
2017-03-07 12:20:52 -05:00
Danny Nguyen
1023a47be6
Copy CMD60 as starting point and rename files
2017-03-07 12:20:52 -05:00
Joshua Colbeck
08cba6c09b
Fixed minor error in ergodox infinity section.
2017-03-07 09:43:08 -06:00
milestogo
2f677c24a8
working with preprocessor macros for babblepaste
2017-03-06 00:16:44 -08:00
Kenichi Sasaki
fec3b78d78
fix backspace key position.
2017-03-05 21:49:41 +09:00
Xyverz
fbbf618a46
Removed preceeding underscore from MASTER_RIGHT in config.h
2017-03-05 03:48:10 -08:00
skullydazed
615bfc4eca
Merge pull request #1107 from qmk/clueboard_cleanup
...
Rework the clueboard keymaps
2017-03-04 10:34:01 -08:00
Kenichi Sasaki
7e518e1d8f
fix again
2017-03-04 23:56:58 +09:00
Xyverz
0d9bceb2fe
Merge remote-tracking branch 'upstream/master'
2017-03-03 19:28:35 -08:00
Xyverz
68808b22c0
Final tweaks to my Kinesis keymap and readme
2017-03-03 19:27:24 -08:00
Jack Humbert
b042428d23
Merge pull request #1126 from folkert4/master
...
Various QOL changes to Espynn's keymap
2017-03-03 10:29:54 -05:00
Jack Humbert
4ab88f3a9e
Merge pull request #1129 from unxmaal/unxmaal_spacefn
...
Layout: Spacebar long-press as fn, for GH60 and GH60 Satan boards
2017-03-03 10:29:19 -05:00
Callum Oakley
61459ab5ba
moar hotkeys
2017-03-02 11:40:25 +00:00
Eric Dodd
d35809a982
gh60 satan spacefn
2017-03-01 21:40:13 -05:00
Eric Dodd
a8a4927622
gh60 spacefn
2017-03-01 21:39:19 -05:00
milestogo
b80c97b712
clean up babblepaste
2017-02-28 23:27:49 -08:00
milestogo
0834c520c0
missed config.h stuck modifiers change
2017-02-28 21:54:35 -08:00
milestogo
748401e5c1
keymap and C6 audio testing
2017-02-28 21:53:42 -08:00
folkert4
71971e818f
Various QOL changes:
...
Removed some unneeded keys from raise and lower layers
moved the + and = signs, backspace is now more intuitive
moved all the Function keys to CUSTOM layer
added ctrl alt del to CUSTOM layer
simplified the layout picture greatly
2017-02-28 17:49:42 -05:00
Jack Humbert
4c4cf3ca49
Merge pull request #1124 from jmdaly/roadkit_firmware
...
Add initial version of TheVan Keyboards Roadkit Firmware
2017-02-28 15:48:34 -05:00
Chris Helming
18ba21aa31
Update default maps for missing keys
2017-02-28 11:40:06 -05:00
John M Daly
e12b1a237c
Add initial version of TheVan Keyboards Roadkit Firmware
2017-02-28 11:17:18 -05:00
Jack Humbert
4583955914
Merge pull request #1116 from hot-leaf-juice/master
...
keymap update
2017-02-27 22:18:55 -05:00
Jack Humbert
b851b0b2ae
Merge pull request #1121 from Leszek111/master
...
add layout
2017-02-27 22:17:36 -05:00
Gunther Gruber
38cf08697b
small changes in guni.c keymap to work with new qmk_firmware packet
2017-02-27 09:55:24 +01:00
Xyverz
d91e09f116
Updates to the README.md
2017-02-26 19:49:10 -08:00
Xyverz
871ac5058a
Minor changes to the keymap: Moved thumb-cluster ESC to Media and Keypad layers
2017-02-26 19:45:57 -08:00
bbbd49a175
Ammend readme.md
2017-02-27 00:27:57 +01:00
138b89e1a1
Add colemak_programmer
2017-02-27 00:16:55 +01:00
Gabriel Young
976c856966
Update size estimates in the Makefile
...
MIDI_ENABLE = no
text data bss dec hex filename
0 17080 0 17080 42b8 satan_midi.hex
MIDI_ENABLE = yes
MIDI_BASIC undefined
MIDI_ADVANCED undefined
text data bss dec hex filename
0 19494 0 19494 4c26 satan_midi.hex
+2414 bytes (vs. MIDI_ENABLE = no)
MIDI_ENABLE = yes
0 20846 0 20846 516e satan_midi.hex
+1352 bytes (vs. MIDI_ENABLE = yes, MIDI_BASIC off, MIDI_ADVANCED
off)
MIDI_ENABLE = yes
#define MIDI_BASIC
#define MIDI_ADVANCED
text data bss dec hex filename
0 21292 0 21292 532c satan_midi.hex
+1798 bytes (vs. MIDI_ENABLE = yes, MIDI_BASIC off, MIDI_ADVANCED
off)
Conclusion:
+2400 to 4200, depending on config
2017-02-25 21:38:35 -08:00
Gabriel Young
a64ae10662
Update existing keymaps
...
Update existing keymaps to enable MIDI_BASIC functionality. Also added
an option MIDI_ENABLE_STRICT to be strict about keycode use (which also
reduces memory footprint at runtime)
2017-02-25 20:41:13 -08:00
nstickney
b69b214d52
making numbers more familiar
2017-02-25 22:04:21 -06:00
Gabriel Young
ea14ed122f
Add basic layer to sample MIDI keycap
2017-02-25 19:37:33 -08:00
Gabriel Young
525be99ee9
Split MIDI functionality into MIDI_BASIC and MIDI_ADVANCED
...
MIDI_ENABLE = no
text data bss dec hex filename
0 17080 0 17080 42b8 satan_midi.hex
MIDI_ENABLE = yes
MIDI_BASIC undefined
MIDI_ADVANCED undefined
text data bss dec hex filename
0 19494 0 19494 4c26 satan_midi.hex
MIDI_ENABLE = yes
#define MIDI_BASIC
MIDI_ADVANCED undefined
text data bss dec hex filename
0 19788 0 19788 4d4c satan_midi.hex
MIDI_ENABLE = yes
MIDI_BASIC undefined
#define MIDI_ADVANCED
text data bss dec hex filename
0 20846 0 20846 516e satan_midi.hex
MIDI_ENABLE = yes
#define MIDI_BASIC
#define MIDI_ADVANCED
text data bss dec hex filename
0 21140 0 21140 5294 satan_midi.hex
2017-02-25 15:02:43 -08:00
nstickney
ebc6948e96
first two layers of ErgoDox Familiar completeC
2017-02-24 17:11:19 -06:00
nstickney
474f7ee3fd
initial layer of familiar layout)
2017-02-23 22:24:32 -06:00
nstickney
498dfdd02c
Merge https://github.com/qmk/qmk_firmware
2017-02-23 21:15:40 -06:00
nstickney
9b40dd796e
familiar layout graphics, etc
2017-02-23 21:13:45 -06:00
Priyadi Iman Nurcahyo
b27a8dea1b
Merge branch 'master' into promethium
2017-02-23 18:11:59 +07:00
Callum Oakley
b06961c38b
updated readme
2017-02-22 12:26:13 +00:00
Jack Humbert
84b2f86f24
Merge pull request #1113 from kesslern/master
...
Add dvorak_emacs_software layout for ergodox
2017-02-21 23:35:09 -05:00
Josh Colbeck
e51001efcc
Merge remote-tracking branch 'qmk/master'
2017-02-21 20:31:16 -06:00
Callum Oakley
1316ca67af
added hotkey cluster
2017-02-21 23:07:22 +00:00
Priyadi Iman Nurcahyo
3dab8a60fc
added pause, prtsc & ins to list of keys to be processed on release
2017-02-21 16:40:38 +07:00
Priyadi Iman Nurcahyo
57623805e8
Move caps to FUN layer; add Pause key
2017-02-21 16:36:35 +07:00
Xyverz
bf6f7a623d
Merge remote-tracking branch 'upstream/master'
2017-02-20 23:54:09 -08:00
Nathan Kessler
b9fce16490
Add dvorak_emacs_software layout for ergodox
2017-02-20 22:55:43 -05:00
Priyadi Iman Nurcahyo
b306f83c6b
Move del back to fun+backspce
2017-02-21 04:00:05 +07:00
Priyadi Iman Nurcahyo
77f9363675
Only process Fnumber on key release, and only when layer is still active
2017-02-21 03:24:32 +07:00
Jack Humbert
7ff41df32c
Merge pull request #1097 from stanleylai/master
...
Added support for LED backlight, XD60v2's RGB underglow LED
2017-02-20 11:10:20 -05:00
Gabriel Young
64eecfc530
fix typos in keymap
2017-02-19 22:23:32 -08:00
nstickney
5abe05147c
familiar layout v0.1 from ErgoDox-EZ configurator
2017-02-19 21:25:35 -06:00
Gabriel Young
ed15973a3f
Document size added by MIDI_ENABLE (~3800 bytes according to my experiments)
...
satan/keymaps/midi
MIDI_ENABLE = no
text data bss dec hex filename
0 17080 0 17080 42b8 satan_midi.hex
MIDI_ENABLE = yes
#define MIDI_TONE_KEYCODE_OCTAVES 3 // default
text data bss dec hex filename
0 20846 0 20846 516e satan_midi.hex
MIDI_ENABLE = yes
#define MIDI_TONE_KEYCODE_OCTAVES 2 // fewer octaves
text data bss dec hex filename
0 20846 0 20846 516e satan_midi.hex
2017-02-19 17:45:08 -08:00
Gabriel Young
d1fe24ad9f
Allow customization of the number of tone keycodes and add example keymap
2017-02-19 17:18:05 -08:00
Kenichi Sasaki
c61b5d88a8
change bracket key posision
2017-02-19 22:46:54 +09:00
Stanley Lai
76b1f392ab
XD60: Added BL_TOGG back to keymap, with 6 backlight steps
2017-02-18 21:47:11 -08:00
Jack Humbert
c2239e6b96
merging
2017-02-19 00:04:14 -05:00
Stanley Lai
d168822477
Updated XD60 readme and photos to reflect v2 PCB
2017-02-18 20:56:17 -08:00
Kenichi Sasaki
ab5d4ae803
fix
2017-02-18 02:19:56 +09:00
Kenichi Sasaki
6d16d282bf
remove reset key
2017-02-18 01:27:12 +09:00
Kenichi Sasaki
e9b1958df2
Added JIS keymap symbols
2017-02-18 01:07:04 +09:00
Kenichi Sasaki
62aacd06ed
copied and Meta(ESC)
2017-02-18 00:40:15 +09:00
skullY
1d87df5262
Add the mouse_keys layout
2017-02-16 14:04:04 -08:00
Xyverz
ca1ec7b121
Fixed the TODO list.
2017-02-16 13:48:54 -08:00
skullY
cbef63d8fa
Rework the clueboard keymaps a bit.
2017-02-16 13:40:45 -08:00
Stephen Tudor
33bc4c070c
Update smt Planck keymap
2017-02-16 14:32:46 -05:00
Stephen Tudor
334edc3c7d
Add smt keymap for Let's Split (based on serial)
2017-02-16 14:32:24 -05:00
Jack Humbert
49e72632d2
remove more warnings
2017-02-16 13:13:38 -05:00
Priyadi Iman Nurcahyo
e5bd81f0a6
Fix integer overflow
2017-02-16 23:56:47 +07:00
Priyadi Iman Nurcahyo
21f4944426
Merge branch 'master' into promethium
2017-02-16 23:53:47 +07:00
Priyadi Iman Nurcahyo
96a8e2d5f5
reposition ins and del key
2017-02-16 23:53:09 +07:00
Jack Humbert
e34c3936b7
Merge pull request #1105 from nrrkeene/master
...
The Ordinary Layout v5
2017-02-16 09:49:24 -05:00
Xyverz
6fa6e6c4c6
Fixed inaccuracies in keymap comments and the readme.
2017-02-15 23:01:27 -08:00
Xyverz
80d5649f25
More refinements to my Kinesis keymap. Added a readme.md file.
2017-02-15 22:54:52 -08:00
Xyverz
1dabceb197
minor adjustments.
2017-02-15 21:56:48 -08:00
Nicholas Keene
d99f03a1a6
The Ordinary Layout has all the keys in the right places.
2017-02-15 23:11:04 -06:00
Nicholas Keene
7606f784dd
This is the best layout, really, come look
2017-02-15 23:02:30 -06:00
Nicholas Keene
af942f2e57
The Ordinary Layout is the best one, the one you are looking for. Really. Check it out.
2017-02-15 22:33:04 -06:00
Xyverz
ea20a064b9
Added my keymap to the Kinesis project.
2017-02-15 20:14:32 -08:00
Priyadi Iman Nurcahyo
ac04fe0301
Added README for my keymap
2017-02-15 19:40:33 +07:00
Priyadi Iman Nurcahyo
3882f97d2e
Move keyboard specific stuff to keyboard specific files, and vice versa
2017-02-15 19:22:58 +07:00
Priyadi Iman Nurcahyo
1eac297a2f
Added copyright notice
2017-02-15 16:39:19 +07:00
Priyadi Iman Nurcahyo
c2f0207d59
Merge my Planck-like keyboards
2017-02-15 16:36:31 +07:00
Priyadi Iman Nurcahyo
b128617ede
Merge branch 'master' into promethium
2017-02-15 15:51:42 +07:00
Nicholas Keene
54785c1976
The Ordinary Layout is boring, normal, typical, expected.
2017-02-14 22:47:11 -06:00
Nicholas Keene
e006b4a600
The Ordinary Layout has a feature for one-handed chorded typing
2017-02-14 22:32:31 -06:00
Nicholas Keene
1e09698146
All my friends us The Ordinary Layout because it doesn't force you to change you typing habits
2017-02-14 22:31:54 -06:00
Nicholas Keene
c055098952
The Ordinary Layout now has more symbols on the Symbols layer! So useful!
2017-02-14 22:30:07 -06:00
Priyadi Iman Nurcahyo
168c912027
Move Alt-Tab position
2017-02-15 05:38:40 +07:00
Priyadi Iman Nurcahyo
df311c7b40
num, func, punc 3state layer done right
2017-02-15 05:01:03 +07:00
Stanley Lai
3272821d32
Added support for XD60v2 with RGB underglow and LED backlight support
2017-02-13 18:09:02 -08:00
Priyadi Iman Nurcahyo
3758cfd95f
GUI layer fixes
2017-02-14 04:17:09 +07:00
Priyadi Iman Nurcahyo
6c692fca7d
Alt-tab handling in GUI layer
2017-02-14 03:58:12 +07:00
Priyadi Iman Nurcahyo
7ae677dcb7
remove stand alone punc layer switcher for now
2017-02-14 03:18:34 +07:00
Priyadi Iman Nurcahyo
02662e3869
Add explicit punctuation key for greek layers
2017-02-14 00:46:06 +07:00
Priyadi Iman Nurcahyo
c2531ff43b
Func + Num = Punc
2017-02-14 00:44:02 +07:00
Jack Humbert
fd2925efba
Merge pull request #1094 from priyadi/faux_clicky
...
Implement faux-clicky feature
2017-02-13 10:58:50 -05:00
Priyadi Iman Nurcahyo
15e2dbb2a9
move GRV to ESC position
2017-02-13 22:18:36 +07:00
Priyadi Iman Nurcahyo
903e4d3193
Fix faux clicky toggle key
2017-02-13 20:13:33 +07:00
Marvin Ramin
24a40d63c9
define missing KC_NO macro
2017-02-13 13:44:53 +01:00
Priyadi Iman Nurcahyo
75e57b4bcb
Merge branch 'faux_clicky' into promethium
2017-02-13 18:01:57 +07:00
Priyadi Iman Nurcahyo
40ced77606
Update my Planck layout
2017-02-13 17:58:06 +07:00
Priyadi Iman Nurcahyo
97472aabe6
Forgot to add ifdef to optional feature
2017-02-13 17:58:06 +07:00
Priyadi Iman Nurcahyo
68e5c85999
Remove assignment warning
2017-02-13 17:58:06 +07:00
Priyadi Iman Nurcahyo
455568d197
Workaround to remove warning
2017-02-13 17:58:06 +07:00
Priyadi Iman Nurcahyo
5d5f2ff50d
Some space optimization and housekeeping
2017-02-13 17:58:06 +07:00
Marvin Ramin
b28fb29898
adds documentation for reset button and adds one to the default keymap
2017-02-13 09:03:43 +01:00
Jack Humbert
4010360912
adds planck/rev3 makefile so subproject is found
2017-02-12 23:58:44 -05:00
Priyadi Iman Nurcahyo
c68e596f32
Implement faux-clicky feature
2017-02-13 08:03:07 +07:00
luc wastiaux
3bf6c43de7
updated readme
2017-02-13 07:46:07 +08:00
luc wastiaux
352d79e1fb
Merge remote-tracking branch 'upstream/master'
2017-02-13 07:44:28 +08:00
Jack Humbert
4505db5d0e
Merge pull request #1091 from smt/smt/tv44
...
Add smt keymap for tv44 (MiniVan)
2017-02-12 18:42:44 -05:00
luc wastiaux
5f8535b356
change thumb cluster key to be shift
2017-02-13 07:16:01 +08:00
Stephen Tudor
b6730285b4
Add smt keymap for tv44 (MiniVan)
2017-02-12 12:46:24 -05:00
Jack Humbert
8d0fdf1008
adds soft pwm for non-timed ports
2017-02-12 11:29:42 -05:00
milestogo
274b1c53fb
keymap update
2017-02-11 22:10:44 -08:00
Xyverz
719f6f0293
Merge remote-tracking branch 'upstream/master'
2017-02-11 21:57:54 -08:00
Xyverz
4894150094
Changes to the keymap to accommodate the RGB Underglow lighting.
2017-02-11 21:54:58 -08:00
Xyverz
134c354fc5
Adding a config file so that I can get RGB underglow for my Let's Split
2017-02-11 21:54:05 -08:00
Jack Humbert
6d6b3ee9fb
Merge pull request #1065 from milestogo/master
...
Update to kinesis keymaps
2017-02-11 11:51:06 -05:00
Jack Humbert
6bb479ea45
Merge pull request #1085 from priyadi/promethium
...
Promethium keyboard layout update
2017-02-11 11:49:00 -05:00
Jack Humbert
5bdddb7821
Merge pull request #1087 from mneme/master
...
Updated keymap for atreus62/mneme
2017-02-11 11:48:39 -05:00
Jack Humbert
199458378b
Merge pull request #1088 from Mauin/gon_nerd
...
add GON NerD
2017-02-11 11:48:11 -05:00
Marvin Ramin
5daa3a8836
add GON NerD
2017-02-11 17:14:40 +01:00
Priyadi Iman Nurcahyo
4163a3819e
Add regular space to B+N on GUI layer for repeating space
2017-02-11 22:16:19 +07:00
Priyadi Iman Nurcahyo
4c05e39a02
Switch to Emoji layer using Punc + greek
2017-02-11 22:13:35 +07:00
Priyadi Iman Nurcahyo
4586b19be3
Turn off capslock when entering num layer
2017-02-11 22:07:04 +07:00
Priyadi Iman Nurcahyo
c6123b2e4a
Move X in number layer away from space
2017-02-11 22:03:34 +07:00
Priyadi Iman Nurcahyo
513286cf98
LSpace + RSpace = switch layer
2017-02-11 21:54:10 +07:00
David Olsson
52e2afe673
correct spelling in readme
2017-02-11 15:09:30 +01:00
Priyadi Iman Nurcahyo
79de0cd119
Implement Capslock LED
2017-02-11 19:03:18 +07:00
David Olsson
052f81aaca
Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware
2017-02-11 10:50:37 +01:00
David Olsson
aa69337cf5
update readme
2017-02-11 10:49:53 +01:00
Priyadi Iman Nurcahyo
9fc3afbef4
simplify battery calculation for now
2017-02-11 14:50:43 +07:00
Xyverz
902d5077cd
Merge remote-tracking branch 'upstream/master'
2017-02-10 23:34:27 -08:00
Xyverz
4d7105c2cf
Added RGB Underglow to my Preonic
2017-02-10 23:30:08 -08:00
Priyadi Iman Nurcahyo
b31ac35441
Fix emoji layer
2017-02-11 01:30:08 +07:00
Priyadi Iman Nurcahyo
fdd06d3fca
RShift + LShift = Capslock
2017-02-11 00:21:27 +07:00
Priyadi Iman Nurcahyo
bf31f516e3
Add reset keycode
2017-02-11 00:07:44 +07:00
