* e6.5 actually already had a 65_ansi_blocker LAYOUT macro, so just had to enable in rules.
* Add the 65_ansi_blocker LAYOUT macro and enable in rules.mk
* rename LAYOUT macro in .h and in the keymap.c as it was only a default keymap. Also enable in rules.mk
* rename but also had to define the existing LAYOUT macro as the new one to prevent breakage of existing keymaps
* add 65_ansi_blocker support for vinta
* forgot to update the info.json on these
* add new default layout 65_ansi_blocker support to alt
* add 65_ansi_blocker support
* undo changes
* Began Work On STM32 Ergodox
Changes to be committed:
new file: keyboards/ergodox_stm32/config.h
new file: keyboards/ergodox_stm32/rules.mk
* test
* Now it compile. Not linking thou
* Screw this Linker. It links now!
* Blinkly Keyboard
* bootloader test code
* Working on matrix / i2c stuff
* Progress (LED Blink)
* Progress on MCP_23017 Status Flag
* [WIP]
* update
* Works! Remeber to change back the bootloader address when the new bootloadrer is ready.
* Time to go debug the i2c
* Finally, it now works with PCB Rev 1.0.2
* updated for rev.2 pcb
* minor compilation fix
* Why when debugger is enabled then everything works.
* Remeber to call init functions.
* Update arm i2c driver to support STM32F103 series device.
* fix include once header. Replaced with #pragma once.
* complication test
* add default LAYOUT_60_ansi
* add LAYOUT_60_hhkb support
* add tsangan_hhkb support
* add ISO support and rename LAYOUT to LAYOUT_all
* formatting
* add community layouts support
* remove unneeded code
* missed a LAYOUT rename
* add link time optimization to reduce firmware size for some people's keymaps
* new keymap for my chocolate tofu65 with dz65rgb
* consistent with a tada68 layout
* remove extra layer, add swap keycodes and mouse keycodes
* fix the tabs and spaces
* fix the left shift
* move kbd67mkiirgb into kbd67 directory as mkiirgb
* rename files
* rename LAYOUT to LAYOUT_65_ansi_blocker
* add support for default layout
* update readme for new build target
* update parent readme with the fourth variant
* rename LAYOUT to LAYOUT_65_blocker_ansi
* rename LAYOUT macro
* enable LAYOUT_65_blocker_ansi community layout support and remove uneeded lines of code
* rename LAYOUT to LAYOUT_65_blocker_ansi
* rename LAYOUT macro
* enable LAYOUT_65_blocker_ansi community layout support
* enable LAYOUT_65_blocker_ansi support
* fix rename mess up
* add QMK Configurator support with the new rename
* rename blocker_ansi to ansi_blocker as it rolls off the tongue easier
* move canoe into percent directory
* update readme for new make path
* move skog into percent directory
* update readme for new path and new instructions
* update readme
* fix error in naming
* Added ottodokto keymaps for dz60 and tmo50.
* moved placement of keymaps to proper directory
* fixed accidental deletion of semicolon for tmo50 map
* fix to use short form codes
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* move caps lock led to keyboard level so even QMK Configurator users have access to it
* set bootloader correctly to atmel-dfu
* clean up extra carriage return
* convert codebase to #pragma once
* fix file includes
- quantum.h is included at keyboard level, redundant at revision level
- keyboard-level path is accessible at revision level, remove relative pathing
* duplicate common layout macros from rev1 to rev2
Add the layout macros supported by both rev1 and rev2 to rev2.h directly, which exposes these layouts to QMK Configurator.
* enable community layout support (75_ansi, 75_iso)
* add LAYOUT_75_iso layout data
It needs its own tree because its keys are in a different order from LAYOUT_iso_1u even though the physical layout is the same.
* minimize rules.mk files (use QMK defaults)
* use atmel-dfu bootloader rule
* fix typo on rev1 info.json
* making a new board setup for ymdk bface clone
* removing extra keymaps that copied over
* documentation and edits for new ymdk_bface board
* cleaning up config and keymaps
* removed extra keymap and working on READMEs
* readme edits
* shorter aliexpress link in ymdk_bface readme
* added images to readmes and edited the keymaps
* more flashing directions
* Mac directions formatting
* editing and creating the all layout
* cleanign up ymdk_bface keymaps
* fixed typos in layout
* removed tabs
* cleaned up the LED and Backlight configuration.
* adding more to info.josn and cleaning up readme
* fixing JSON typos
* made a ymdk folder and moved the bface into it.
* fixing file names for the new folder structure
* Added Xerpocalypse's layout
+ Number row and symbols are switched compared to default TMO50 layout
+ Right-hand spacebar acts as backspace and a hold-layer for layer 2.
* Update keyboards/tmo50/keymaps/xerpocalypse/keymap.c
Removed unnecessary #define
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/tmo50/keymaps/xerpocalypse/keymap.c
Changed keymap to use KC_UNDS instead of custom-defined keycode
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* get rid of custom matrix that is no longer being used
* remove _kc LAYOUT
* remove ifdefs and replace with pragma once
* cleanup rules and use bootmagic lite
* get rid of led.c
* Update keyboards/alps64/alps64.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* remove unneeded configurations
