Commit graph

20 commits

Author SHA1 Message Date
Drashna Jaelre 0306e487e2
Circular animation (#4796)
* Add ability to animate arm_atsam led matrix from the center of a circle

* Make arm_atsam led matrix circular animation circular rather than obloid

* Fix indentation in tmk_core led_matrix.c
2019-01-25 16:04:21 -08:00
James Churchill 9c136e1168 Improved fix for __always_inline redefinition bug
Instead of changing based on the version of GCC, check for the presence of the macro instead.
2019-01-11 17:25:57 -08:00
patrickmt 6e984a8b5e Update to arm_atsam wait and timer routines
Microsecond (us) delays are now handled by a busy wait loop according to MCU frequency. This replaces the system counter method which had an overhead of around 12us.
TC5 device and supporting routines removed as it was the old us delay counter.
wait_ms is now properly a macro to CLK_delay_ms.
wait_us is now properly a macro to CLK_delay_us.
Removed CLK_get_us as it has no use.
All calls to CLK_get_ms() have been replaced by timer_read64() with corrected typing.
All calls to CLK_delay_ms() have been replaced by wait_ms().
All calls to CLK_delay_us() have been replaced by wait_us() and timings verified or updated as needed after review on scope.
Corrected typing of variables using 64bit ms timer readings if needed.
2019-01-07 12:44:55 -08:00
Ian O'Dea 6ca52c9d57 Fix indentation in tmk_core led_matrix.c 2019-01-07 10:22:47 -06:00
Ian O'Dea 9f3afae5d1 Make arm_atsam led matrix circular animation circular rather than obloid 2019-01-07 10:20:15 -06:00
Ian O'Dea d55dc9b816 Add ability to animate arm_atsam led matrix from the center of a circle 2019-01-07 09:36:28 -06:00
patrickmt 118d5cc03f Fix macro redefinition for GNUC compilers > 6
GNUC compilers greater than version 6 already have the macro __always_inline defined. This fix checks GNUC version before defining the macro itself.
2018-12-14 12:47:17 -08:00
patrickmt 4a5e68f4f2 Bringing Massdrop keyboard hardware configuration to keyboard level (#4593)
MCU Pins for debugging, LED, boot tracing, and shift registers are now configurable at keyboard level.
Macros led_* replaced by DBG_LED_*
Macros m15_* replaced by DBG_1_*
Macros m27_* replaced by DBG_2_*
Macros m28_* replaced by DBG_3_*
For CTRL and ALT keyboards, debug boot tracing pin default now set to pad M27 instead of M28 since although M28 is not being used, it is technically a signal for USB port detection.
m15_print(...) renamed to dbg_print(...) to get away from hard coded port names.
dbg_print function now follows similar pattern to debug led output.
2018-12-10 11:28:06 -08:00
Ian O'Dea 21bc230dfd Vertical animation support for arm_atsam led_matrix (#4538)
* Add initial support for vertically-oriented animations

* DRY up vertical animation support

* Fix animation code for arm_atsam led_matrix to work in all directions

* Adjust py calculation to base off bottom rather than top
2018-12-06 08:58:58 -08:00
James Laird-Wah 39bd760faf Use a single endpoint for HID reports (#3951)
* Unify multiple HID interfaces into one

This reduces the number of USB endpoints required, which frees them up
for other things.

NKRO and EXTRAKEY always use the shared endpoint.

By default, MOUSEKEY also uses it. This means it won't work as a Boot
Procotol mouse in some BIOSes, etc. If you really think your
keyboard needs to work as a mouse in your BIOS, set
MOUSE_SHARED_EP = no in your rules.mk.

By default, the core keyboard does not use the shared endpoint, as not
all BIOSes are standards compliant and that's one place you don't want
to find out your keyboard doesn't work.. If you are really confident,
you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here
too.

* unify endpoints: ChibiOS protocol implementation

* fixup: missing #ifdef EXTRAKEY_ENABLEs

broke build on AVR with EXTRAKEY disabled

* endpoints: restore error when too many endpoints required

* lufa: wait up to 10ms to send keyboard input

This avoids packets being dropped when two reports are sent in quick
succession (eg. releasing a dual role key).

* endpoints: fix compile on ARM_ATSAM

* endpoint: ARM_ATSAM fixes

No longer use wrong or unexpected endpoint IDs

* endpoints: accommodate VUSB protocol

V-USB has its own, understandably simple ideas about the report formats.
It already blasts the mouse and extrakeys through one endpoint with
report IDs. We just stay out of its way.

* endpoints: document new endpoint configuration options

* endpoints: respect keyboard_report->mods in NKRO

The caller(s) of host_keyboard_send expect to be able to just drop
modifiers in the mods field and not worry about whether NKRO is in use.
This is a good thing. So we just shift it over if needs be.

* endpoints: report.c: update for new keyboard_report format
2018-11-15 22:22:05 -08:00
Sean Dwyer 63e212c0b7 Add localized LED flash effect on keypress to Massdrop ALT (#4340) 2018-11-06 11:54:53 -08:00
patrickmt cec203ea80 USB Suspend for arm_atsam protocol
Rewrote USB state tracking for implementation of suspend state.
Updated suspend.c in entirety.
Main subtasks (generally hardware related) are now run prior to keyboard task.
2018-11-02 14:33:07 -07:00
patrickmt 563fe23e53 Fix CTRL/ALT keyboard does not wake computer from sleep
Fix for Massdrop CTRL and ALT keyboards not waking computer from sleep
2018-11-02 14:33:07 -07:00
patrickmt ab91e07753 Massdrop keyboards console device support for hid_listen
Added hid_listen USB device for arm_atsam USB protocol.
Debug printing is now done through the console device (CONSOLE_ENABLE = yes) rather than the virtser device, for viewing in hid_listen.
Function dpf(...) renamed to CDC_printf(...) and should now be called directly if intending to print to the virtual serial device.
2018-10-10 13:49:01 -04:00
patrickmt daf0cc60bf CTRL keyboard bootloader_jump support
Adds support for CTRL keyboards to enter bootloader via bootloader_jump()
2018-09-28 23:09:53 -04:00
patrickmt 239f02408e Massdrop keyboard updates for SEND_STRING, syscalls, stdio, debug prints, Auto Shift (#3973)
* Update for SEND_STRING usage

Update for SEND_STRING usage.
Sending keyboard reports (kbd, nkro) now obey the minimum polling time.
While attempting to send a keyboard report and waiting for a USB poll, other functions of the keyboard, including LED effects and power management, will continue to operate at their intended intervals.

* Updates for send string, syscalls, stdio, debug prints, auto shift

Now properly waiting for previous keys sent over USB to complete before sending new.
Added heap to linker and now compiling with syscalls support.
Removed custom string functions and now using stdio.
dprintf now works as intended through virtser device.

* CTRL and ALT keymap updates

CTRL mac keymap updated
ALT default and mac keymap updated
ALT rules.mk added Auto Shift with default no

* Code cleanup as per discussion with vomindoraan

Code cleanup as per discussion with vomindoraan
2018-09-28 21:32:15 -04:00
patrickmt b8a0d3de3d Keyboard: ALT keymap update and LED driver brightness mismatch fix (#3890)
* ALT keymap update

Added additional End key on layer 1 to match key cap

* LED driver update addressing PR #3871

Update sync between IS31FL3733 drivers is causing varying behavior in keyboards including brightness mismatch and slight flicker at very low rgb values. Visually, disabling sync is not noticeable. Ref PR #3871 by guarnacciaa.
2018-09-13 09:17:26 -07:00
patrickmt e5465e1c57 CTRL and ALT updates
Added support to enter bootloader from software (bootloader version must be newer than "v2.18Jun 22 2018 17:28:08" until workaround for older is created).
Updated CTRL and ALT keymaps for entering bootloader with Fn+b held for >500ms.
Added basic MacOS keymap for ALT.
USB sleep LED indicator now turns off after 1 second.
Slowed down debug LED code printing.
2018-09-05 11:14:31 -07:00
patrickmt 2aa27f0c78 Keyboard: Rename alt67 to alt (#3824)
Renamed keyboard alt67 to alt and adjusted necessary files where alt67 appeared.
CTRL keymap fixed enum structure name.
usb2422 removed stray define no longer used.
2018-09-01 09:21:48 -07:00
patrickmt 30680c6eb3 Massdrop keyboard support (#3780)
* Massdrop SAMD51

Massdrop SAMD51 keyboards initial project upload

* Removing relocated files

Removing files that were relocated and not deleted from previous location

* LED queue fix and cleaning

Cleaned some white space or comments.
Fix for LED I2C command queue.
Cleaned up interrupts.
Added debug function for printing numbers to scope through m15 line.

* Factory programmed serial usage

Ability to use factory programmed serial in hub and keyboard usb descriptors

* USB serial number and bugfix

Added support for factory programmed serial and usage.
Incorporated bootloader's conditional compiling to align project closer.
Fixed issue when USB device attempted to send before enabled.
General white space and comment cleanup.

* Project cleanup

Cleaned up project in terms of white space, commented code, and unecessary files.
NKRO keyboard is now using correct setreport although KBD was fine to use.
Fixed broken linkage to __xprintf for serial debug statements.

* Fix for extra keys

Fixed possible USB hang on extra keys report set missing

* I2C cleanup

I2C cleanup and file renames necessary for master branch merge

* Boot tracing and clocks cleanup

Added optional boot debug trace mode through debug LED codes.
General clock code cleanup.

* Relocate ARM/Atmel headers

Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes.

* Pull request changes

Pull request changes

* Keymap and compile flag fix

Keymap fix for momentary layer.
Potential compile flag fix for Travis CI failure.

* va_list include fix

Fix for va_list compile failure

* Include file case fixes

Fixes for include files with incorrect case

* ctrl and alt67 keyboard readme

Added ctrl and alt67 keyboard readme files
2018-08-29 15:07:52 -04:00