Clean up Force NKRO in config.h (#19718)

2023-01-31 07:45:41 +11:00 · 2023-01-31 07:45:41 +11:00 · b867522f8c
parent d84a7351ea
commit b867522f8c
625 changed files with 11 additions and 13108 deletions
--- a/keyboards/0xc7/61key/config.h
+++ b/keyboards/0xc7/61key/config.h
@ -91,27 +91,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/1upkeyboards/1up60hse/config.h
+++ b/keyboards/1upkeyboards/1up60hse/config.h
@ -77,27 +77,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/1upkeyboards/super16/config.h
+++ b/keyboards/1upkeyboards/super16/config.h
@ -137,27 +137,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/1upkeyboards/super16v2/config.h
+++ b/keyboards/1upkeyboards/super16v2/config.h
@ -131,27 +131,6 @@
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/40percentclub/25/config.h
+++ b/keyboards/40percentclub/25/config.h
@ -70,27 +70,6 @@
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/40percentclub/4pack/config.h
+++ b/keyboards/40percentclub/4pack/config.h
@ -84,27 +84,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/40percentclub/4x4/config.h
+++ b/keyboards/40percentclub/4x4/config.h
@ -39,27 +39,6 @@
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/40percentclub/5x5/config.h
+++ b/keyboards/40percentclub/5x5/config.h
@ -47,27 +47,6 @@
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/40percentclub/6lit/config.h
+++ b/keyboards/40percentclub/6lit/config.h
@ -70,27 +70,6 @@
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/40percentclub/foobar/config.h
+++ b/keyboards/40percentclub/foobar/config.h
@ -70,27 +70,6 @@
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/40percentclub/half_n_half/config.h
+++ b/keyboards/40percentclub/half_n_half/config.h
@ -69,27 +69,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/40percentclub/i75/config.h
+++ b/keyboards/40percentclub/i75/config.h
@ -33,27 +33,6 @@
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/40percentclub/mf68/config.h
+++ b/keyboards/40percentclub/mf68/config.h
@ -63,27 +63,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/40percentclub/nein/config.h
+++ b/keyboards/40percentclub/nein/config.h
@ -65,27 +65,6 @@
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/40percentclub/nori/config.h
+++ b/keyboards/40percentclub/nori/config.h
@ -73,27 +73,6 @@
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/40percentclub/polyandry/config.h
+++ b/keyboards/40percentclub/polyandry/config.h
@ -36,27 +36,6 @@
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/40percentclub/sixpack/config.h
+++ b/keyboards/40percentclub/sixpack/config.h
@ -77,28 +77,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0
--- a/keyboards/abstract/ellipse/rev1/config.h
+++ b/keyboards/abstract/ellipse/rev1/config.h
@ -67,27 +67,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/acheron/elongate/beta/config.h
+++ b/keyboards/acheron/elongate/beta/config.h
@ -85,27 +85,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/acheron/shark/alpha/config.h
+++ b/keyboards/acheron/shark/alpha/config.h
@ -89,27 +89,6 @@ B0, which is unconnected on the PCB
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/ada/infinity81/config.h
+++ b/keyboards/ada/infinity81/config.h
@ -67,27 +67,6 @@
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/adelheid/config.h
+++ b/keyboards/adelheid/config.h
@ -67,27 +67,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/ai03/equinox/config.h
+++ b/keyboards/ai03/equinox/config.h
@ -73,27 +73,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/ai03/jp60/config.h
+++ b/keyboards/ai03/jp60/config.h
@ -54,27 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/ai03/lunar/config.h
+++ b/keyboards/ai03/lunar/config.h
@ -69,27 +69,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/ai03/lunar_ii/config.h
+++ b/keyboards/ai03/lunar_ii/config.h
@ -26,29 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SOLENOID_PIN B7
 #define SOLENOID_DEFAULT_DWELL 15
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/ai03/orbit/config.h
+++ b/keyboards/ai03/orbit/config.h
@ -80,27 +80,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/ai03/orbit_x/config.h
+++ b/keyboards/ai03/orbit_x/config.h
@ -64,27 +64,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/ai03/quasar/config.h
+++ b/keyboards/ai03/quasar/config.h
@ -75,27 +75,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/ai03/soyuz/config.h
+++ b/keyboards/ai03/soyuz/config.h
@ -69,27 +69,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/al1/config.h
+++ b/keyboards/al1/config.h
@ -49,27 +49,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/alf/dc60/config.h
+++ b/keyboards/alf/dc60/config.h
@ -79,27 +79,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/alf/x11/config.h
+++ b/keyboards/alf/x11/config.h
@ -83,27 +83,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/amjkeyboard/amj84/config.h
+++ b/keyboards/amjkeyboard/amj84/config.h
@ -57,25 +57,6 @@
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 #define FORCE_NKRO
 /*
--- a/keyboards/amjkeyboard/amj96/config.h
+++ b/keyboards/amjkeyboard/amj96/config.h
@ -78,27 +78,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/arisu/config.h
+++ b/keyboards/arisu/config.h
@ -64,27 +64,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/ash1800/config.h
+++ b/keyboards/ash1800/config.h
@ -79,27 +79,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/atlas_65/config.h
+++ b/keyboards/atlas_65/config.h
@ -63,27 +63,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/atomic/config.h
+++ b/keyboards/atomic/config.h
@ -53,27 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/atset/at1/config.h
+++ b/keyboards/atset/at1/config.h
@ -43,25 +43,3 @@
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 */
 //#define FORCE_NKRO
--- a/keyboards/atset/at12/config.h
+++ b/keyboards/atset/at12/config.h
@ -43,25 +43,3 @@
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 */
 //#define FORCE_NKRO
--- a/keyboards/atset/at16/config.h
+++ b/keyboards/atset/at16/config.h
@ -43,25 +43,3 @@
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 */
 //#define FORCE_NKRO
--- a/keyboards/atset/at3/config.h
+++ b/keyboards/atset/at3/config.h
@ -43,25 +43,3 @@
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 */
 //#define FORCE_NKRO
--- a/keyboards/atset/at6/config.h
+++ b/keyboards/atset/at6/config.h
@ -43,25 +43,3 @@
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 */
 //#define FORCE_NKRO
--- a/keyboards/atset/at9/config.h
+++ b/keyboards/atset/at9/config.h
@ -43,24 +43,3 @@
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 */
 //#define FORCE_NKRO
--- a/keyboards/aurora65/config.h
+++ b/keyboards/aurora65/config.h
@ -65,27 +65,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /* Bootmagic Lite key configuration */
 #define BOOTMAGIC_LITE_ROW 0
 #define BOOTMAGIC_LITE_COLUMN 0
--- a/keyboards/aves60/config.h
+++ b/keyboards/aves60/config.h
@ -78,27 +78,6 @@
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/baguette/config.h
+++ b/keyboards/baguette/config.h
@ -66,27 +66,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/baion_808/config.h
+++ b/keyboards/baion_808/config.h
@ -41,24 +41,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
--- a/keyboards/bandominedoni/config.h
+++ b/keyboards/bandominedoni/config.h
@ -176,27 +176,6 @@
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/barleycorn_smd/config.h
+++ b/keyboards/barleycorn_smd/config.h
@ -71,28 +71,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/bear_face/config.h
+++ b/keyboards/bear_face/config.h
@ -39,39 +39,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 #define FORCE_NKRO
 /*
 * Magic Key Options
 *
 * Magic keys are hotkey commands that allow control over firmware functions of
 * the keyboard. They are best used in combination with the HID Listen program,
 * found here: https://www.pjrc.com/teensy/hid_listen.html
 *
 * The options below allow the magic key functionality to be changed. This is
 * useful if your keyboard/keypad is missing keys and you want magic key support.
 *
 */
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/biacco42/meishi/config.h
+++ b/keyboards/biacco42/meishi/config.h
@ -54,27 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/biacco42/meishi2/config.h
+++ b/keyboards/biacco42/meishi2/config.h
@ -75,27 +75,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/binepad/bn003/config.h
+++ b/keyboards/binepad/bn003/config.h
@ -44,37 +44,3 @@
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Magic Key Options
 *
 * Magic keys are hotkey commands that allow control over firmware functions of
 * the keyboard. They are best used in combination with the HID Listen program,
 * found here: https://www.pjrc.com/teensy/hid_listen.html
 *
 * The options below allow the magic key functionality to be changed. This is
 * useful if your keyboard/keypad is missing keys and you want magic key support.
 *
 */
--- a/keyboards/binepad/bn009/config.h
+++ b/keyboards/binepad/bn009/config.h
@ -44,26 +44,3 @@
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
--- a/keyboards/blank/blank01/config.h
+++ b/keyboards/blank/blank01/config.h
@ -81,27 +81,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/blockey/config.h
+++ b/keyboards/blockey/config.h
@ -72,27 +72,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/boston_meetup/2019/config.h
+++ b/keyboards/boston_meetup/2019/config.h
@ -65,27 +65,6 @@
 /* Locking resynchronize hack */
 //#define LOCKING_RESYNC_ENABLE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/bpiphany/frosty_flake/config.h
+++ b/keyboards/bpiphany/frosty_flake/config.h
@ -46,27 +46,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/bpiphany/hid_liber/config.h
+++ b/keyboards/bpiphany/hid_liber/config.h
@ -40,27 +40,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/bpiphany/kitten_paw/config.h
+++ b/keyboards/bpiphany/kitten_paw/config.h
@ -54,27 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/bpiphany/sixshooter/config.h
+++ b/keyboards/bpiphany/sixshooter/config.h
@ -14,27 +14,6 @@
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/bpiphany/tiger_lily/config.h
+++ b/keyboards/bpiphany/tiger_lily/config.h
@ -51,27 +51,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/bpiphany/unloved_bastard/config.h
+++ b/keyboards/bpiphany/unloved_bastard/config.h
@ -43,27 +43,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/bt66tech/bt66tech60/config.h
+++ b/keyboards/bt66tech/bt66tech60/config.h
@ -61,27 +61,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 #define FORCE_NKRO
 #define FORCE_NKRO
 /* disable debug print */
 //#define NO_DEBUG
--- a/keyboards/bthlabs/geekpad/config.h
+++ b/keyboards/bthlabs/geekpad/config.h
@ -62,27 +62,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/buildakb/potato65/config.h
+++ b/keyboards/buildakb/potato65/config.h
@ -54,27 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/caffeinated/serpent65/config.h
+++ b/keyboards/caffeinated/serpent65/config.h
@ -60,27 +60,6 @@ B0, which is unconnected on the PCB
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/capsunlocked/cu24/config.h
+++ b/keyboards/capsunlocked/cu24/config.h
@ -73,27 +73,6 @@
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/capsunlocked/cu65/config.h
+++ b/keyboards/capsunlocked/cu65/config.h
@ -54,27 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/capsunlocked/cu75/config.h
+++ b/keyboards/capsunlocked/cu75/config.h
@ -55,27 +55,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/carbo65/config.h
+++ b/keyboards/carbo65/config.h
@ -46,27 +46,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /* Bootmagic Lite key configuration */
 #define BOOTMAGIC_LITE_ROW 0
 #define BOOTMAGIC_LITE_COLUMN 0
--- a/keyboards/chavdai40/rev1/config.h
+++ b/keyboards/chavdai40/rev1/config.h
@ -44,24 +44,3 @@
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
--- a/keyboards/chavdai40/rev2/config.h
+++ b/keyboards/chavdai40/rev2/config.h
@ -44,24 +44,3 @@
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
--- a/keyboards/chickenman/ciel/config.h
+++ b/keyboards/chickenman/ciel/config.h
@ -54,27 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/ckeys/handwire_101/config.h
+++ b/keyboards/ckeys/handwire_101/config.h
@ -49,27 +49,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 // Audio Click
 //#define AUDIO_CLICKY
--- a/keyboards/ckeys/nakey/config.h
+++ b/keyboards/ckeys/nakey/config.h
@ -54,27 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/ckeys/obelus/config.h
+++ b/keyboards/ckeys/obelus/config.h
@ -52,27 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/ckeys/thedora/config.h
+++ b/keyboards/ckeys/thedora/config.h
@ -47,27 +47,6 @@
 #define DAC_SAMPLE_MAX 65535U
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 // Audio Click
 // Music Mode Polyphony
--- a/keyboards/ckeys/washington/config.h
+++ b/keyboards/ckeys/washington/config.h
@ -80,27 +80,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/clueboard/66_hotswap/gen1/config.h
+++ b/keyboards/clueboard/66_hotswap/gen1/config.h
@ -25,27 +25,6 @@
 /* Locking resynchronize hack */
 //#define LOCKING_RESYNC_ENABLE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/coarse/vinta/config.h
+++ b/keyboards/coarse/vinta/config.h
@ -21,24 +21,3 @@
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
--- a/keyboards/contender/config.h
+++ b/keyboards/contender/config.h
@ -89,27 +89,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/cool836a/config.h
+++ b/keyboards/cool836a/config.h
@ -82,27 +82,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/copenhagen_click/click_pad_v1/config.h
+++ b/keyboards/copenhagen_click/click_pad_v1/config.h
@ -79,27 +79,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/coseyfannitutti/discipad/config.h
+++ b/keyboards/coseyfannitutti/discipad/config.h
@ -73,27 +73,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/coseyfannitutti/discipline/config.h
+++ b/keyboards/coseyfannitutti/discipline/config.h
@ -71,27 +71,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/coseyfannitutti/mullet/config.h
+++ b/keyboards/coseyfannitutti/mullet/config.h
@ -73,27 +73,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/coseyfannitutti/mulletpad/config.h
+++ b/keyboards/coseyfannitutti/mulletpad/config.h
@ -63,27 +63,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/coseyfannitutti/mysterium/config.h
+++ b/keyboards/coseyfannitutti/mysterium/config.h
@ -69,27 +69,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/coseyfannitutti/romeo/config.h
+++ b/keyboards/coseyfannitutti/romeo/config.h
@ -72,27 +72,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/craftwalk/config.h
+++ b/keyboards/craftwalk/config.h
@ -85,27 +85,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/crazy_keyboard_68/config.h
+++ b/keyboards/crazy_keyboard_68/config.h
@ -88,27 +88,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/crimsonkeyboards/resume1800/config.h
+++ b/keyboards/crimsonkeyboards/resume1800/config.h
@ -60,27 +60,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/crypt_macro/config.h
+++ b/keyboards/crypt_macro/config.h
@ -65,27 +65,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /* Bootmagic Lite key configuration */
 #define BOOTMAGIC_LITE_ROW 0
 #define BOOTMAGIC_LITE_COLUMN 0
--- a/keyboards/cutie_club/wraith/config.h
+++ b/keyboards/cutie_club/wraith/config.h
@ -73,27 +73,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/dailycraft/bat43/config.h
+++ b/keyboards/dailycraft/bat43/config.h
@ -75,27 +75,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/dailycraft/owl8/config.h
+++ b/keyboards/dailycraft/owl8/config.h
@ -82,27 +82,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/dailycraft/sandbox/rev1/config.h
+++ b/keyboards/dailycraft/sandbox/rev1/config.h
@ -81,27 +81,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 //#define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/Show more
+++ b/Show more