Wasdat: move some stuff to info.json (#17327)

This commit is contained in:
Ryan 2022-06-11 08:24:29 +10:00 committed by GitHub
parent 92665aef33
commit b4b34cd2cd
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
3 changed files with 30 additions and 107 deletions

View file

@ -19,13 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x4705
#define PRODUCT_ID 0xC474
#define DEVICE_VER 0x0001
#define MANUFACTURER Evyd13
#define PRODUCT Wasdat
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 16
@ -46,87 +39,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define SN74X138_ADDRESS_PINS { D2, D1, D0 }
// For QMK DFU
#define QMK_ESC_OUTPUT D6
#define QMK_ESC_INPUT D7
#define QMK_LED B0
#define LED_NUM_LOCK_PIN B2
#define LED_CAPS_LOCK_PIN B0
#define LED_SCROLL_LOCK_PIN B1
#define LED_PIN_ON_STATE 0
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== all animations enable ==*/
// #define RGBLIGHT_ANIMATIONS
// /*== or choose animations ==*/
// #define RGBLIGHT_EFFECT_BREATHING
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
// #define RGBLIGHT_EFFECT_SNAKE
// #define RGBLIGHT_EFFECT_KNIGHT
// #define RGBLIGHT_EFFECT_CHRISTMAS
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View file

@ -1,7 +1,36 @@
{
"keyboard_name": "Wasdat",
"manufacturer": "Evyd13",
"url": "https://maartenwut.com/product/wasdat/",
"maintainer": "evyd13",
"processor": "atmega32u4",
"bootloader": "qmk-dfu",
"usb": {
"vid": "0x4705",
"pid": "0xC474",
"device_version": "0.0.1",
},
"qmk_lufa_bootloader": {
"esc_output": "D6",
"esc_input": "D7",
"led": "B0"
},
"features": {
"bootmagic": true,
"extrakey": true,
"nkro": true,
},
"indicators": {
"num_lock": "B2",
"caps_lock": "B0",
"scroll_lock": "B1"
},
"community_layouts": [
"fullsize_ansi",
"fullsize_iso",
"tkl_ansi",
"tkl_iso"
],
"layouts": {
"LAYOUT_fullsize_ansi": {
"layout": [

View file

@ -1,24 +1,4 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = qmk-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
CUSTOM_MATRIX = lite
VPATH += drivers/gpio
SRC += matrix.c sn74x138.c
LAYOUTS = fullsize_ansi fullsize_iso tkl_ansi tkl_iso