[Keyboard] JM60 refactor (#11421)
This commit is contained in:
Ryan
GitHub
parent
581368596e
commit
985b8cab7c
|
|
@ -15,39 +15,105 @@ You should have received a copy of the GNU General Public License
|
|||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
#pragma once
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6464
|
||||
#define DEVICE_VER 0x0001
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6464
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER JMWS
|
||||
#define PRODUCT JM60 RGB Keyboard(QMK)
|
||||
#define DESCRIPTION QMK keyboard firmware for JM60 RGB Keyboard
|
||||
#define PRODUCT JM60
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 14
|
||||
|
||||
/* number of backlight levels */
|
||||
//#define BACKLIGHT_LEVELS 1
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { B11, B10, B2, B1, B0 }
|
||||
#define MATRIX_COL_PINS { A15, C10, C11, C12, D2, B3, B4, B5, B6, B7, B8, B9, A2, A3 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
//#define LED_BRIGHTNESS_LO 100
|
||||
//#define LED_BRIGHTNESS_HI 255
|
||||
/* COL2ROW, ROW2COL */
|
||||
#define DIODE_DIRECTION ROW2COL
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define BACKLIGHT_PIN B7
|
||||
//#define BACKLIGHT_LEVELS 3
|
||||
//#define BACKLIGHT_BREATHING
|
||||
|
||||
//#define RGB_DI_PIN E2
|
||||
//#ifdef RGB_DI_PIN
|
||||
//# define RGBLED_NUM 16
|
||||
//# define RGBLIGHT_HUE_STEP 8
|
||||
//# define RGBLIGHT_SAT_STEP 8
|
||||
//# define RGBLIGHT_VAL_STEP 8
|
||||
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
/*== all animations enable ==*/
|
||||
//# define RGBLIGHT_ANIMATIONS
|
||||
/*== or choose animations ==*/
|
||||
//# define RGBLIGHT_EFFECT_BREATHING
|
||||
//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
//# define RGBLIGHT_EFFECT_SNAKE
|
||||
//# define RGBLIGHT_EFFECT_KNIGHT
|
||||
//# define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
//# define RGBLIGHT_EFFECT_RGB_TEST
|
||||
//# define RGBLIGHT_EFFECT_ALTERNATING
|
||||
/*== customize breathing effect ==*/
|
||||
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||
/*==== use exp() and sin() ====*/
|
||||
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||
//#endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
//#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
//#define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
|
|
@ -63,7 +129,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
||||
/* disable these deprecated features by default */
|
||||
#define NO_ACTION_MACRO
|
||||
#define NO_ACTION_FUNCTION
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
//#define BOOTMAGIC_LITE_ROW 0
|
||||
//#define BOOTMAGIC_LITE_COLUMN 0
|
||||
|
|
|
|||
78
keyboards/jm60/info.json
Normal file
78
keyboards/jm60/info.json
Normal file
|
|
@ -0,0 +1,78 @@
|
|||
{
|
||||
"keyboard_name": "JM60",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 15,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT_60_ansi": {
|
||||
"layout": [
|
||||
{"x": 0, "y": 0},
|
||||
{"x": 1, "y": 0},
|
||||
{"x": 2, "y": 0},
|
||||
{"x": 3, "y": 0},
|
||||
{"x": 4, "y": 0},
|
||||
{"x": 5, "y": 0},
|
||||
{"x": 6, "y": 0},
|
||||
{"x": 7, "y": 0},
|
||||
{"x": 8, "y": 0},
|
||||
{"x": 9, "y": 0},
|
||||
{"x": 10, "y": 0},
|
||||
{"x": 11, "y": 0},
|
||||
{"x": 12, "y": 0},
|
||||
{"x": 13, "y": 0, "w": 2},
|
||||
|
||||
{"x": 0, "y": 1, "w": 1.5},
|
||||
{"x": 1.5, "y": 1},
|
||||
{"x": 2.5, "y": 1},
|
||||
{"x": 3.5, "y": 1},
|
||||
{"x": 4.5, "y": 1},
|
||||
{"x": 5.5, "y": 1},
|
||||
{"x": 6.5, "y": 1},
|
||||
{"x": 7.5, "y": 1},
|
||||
{"x": 8.5, "y": 1},
|
||||
{"x": 9.5, "y": 1},
|
||||
{"x": 10.5, "y": 1},
|
||||
{"x": 11.5, "y": 1},
|
||||
{"x": 12.5, "y": 1},
|
||||
{"x": 13.5, "y": 1, "w": 1.5},
|
||||
|
||||
{"x": 0, "y": 2, "w": 1.75},
|
||||
{"x": 1.75, "y": 2},
|
||||
{"x": 2.75, "y": 2},
|
||||
{"x": 3.75, "y": 2},
|
||||
{"x": 4.75, "y": 2},
|
||||
{"x": 5.75, "y": 2},
|
||||
{"x": 6.75, "y": 2},
|
||||
{"x": 7.75, "y": 2},
|
||||
{"x": 8.75, "y": 2},
|
||||
{"x": 9.75, "y": 2},
|
||||
{"x": 10.75, "y": 2},
|
||||
{"x": 11.75, "y": 2},
|
||||
{"x": 12.75, "y": 2, "w": 2.25},
|
||||
|
||||
{"x": 0, "y": 3, "w": 2.25},
|
||||
{"x": 2.25, "y": 3},
|
||||
{"x": 3.25, "y": 3},
|
||||
{"x": 4.25, "y": 3},
|
||||
{"x": 5.25, "y": 3},
|
||||
{"x": 6.25, "y": 3},
|
||||
{"x": 7.25, "y": 3},
|
||||
{"x": 8.25, "y": 3},
|
||||
{"x": 9.25, "y": 3},
|
||||
{"x": 10.25, "y": 3},
|
||||
{"x": 11.25, "y": 3},
|
||||
{"x": 12.25, "y": 3, "w": 2.75},
|
||||
|
||||
{"x": 0, "y": 4, "w": 1.25},
|
||||
{"x": 1.25, "y": 4, "w": 1.25},
|
||||
{"x": 2.5, "y": 4, "w": 1.25},
|
||||
{"x": 3.75, "y": 4, "w": 6.25},
|
||||
{"x": 10, "y": 4, "w": 1.25},
|
||||
{"x": 11.25, "y": 4, "w": 1.25},
|
||||
{"x": 12.5, "y": 4, "w": 1.25},
|
||||
{"x": 13.75, "y": 4, "w": 1.25}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -14,4 +14,5 @@ GNU General Public License for more details.
|
|||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#include "jm60.h"
|
||||
|
|
|
|||
|
|
@ -14,40 +14,23 @@ GNU General Public License for more details.
|
|||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#ifndef JM60_H
|
||||
#define JM60_H
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
// readability
|
||||
#define XXX KC_NO
|
||||
|
||||
/* Satan GH60 ANSI layout
|
||||
* ,-----------------------------------------------------------.
|
||||
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2c| 2d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3b| 3d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 40 | 41 | 42 | 46 | 4a | 4b | 4c | 4d |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
#define KEYMAP_ANSI( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2c, k2d, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3b, k3d, \
|
||||
k40, k41, k42, k46, k4a, k4b, k4c, k4d \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c, k2d}, \
|
||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, XXX, k3b, XXX, k3d}, \
|
||||
{k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \
|
||||
#define LAYOUT_60_ansi( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2C, k2D, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3B, k3D, \
|
||||
k40, k41, k42, k46, k4A, k4B, k4C, k4D \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, XXX, k2C, k2D }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, XXX, k3B, XXX, k3D }, \
|
||||
{ k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, k4C, k4D } \
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,44 +1,39 @@
|
|||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
// Used for SHIFT_ESC
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: (Base Layer) Default Layer
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |
|
||||
* |-----------------------------------------------------------|
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_BL] = KEYMAP_ANSI(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \
|
||||
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, MO(_FL),KC_RCTL),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = KEYMAP_ANSI(
|
||||
KC_GRV, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, BL_INC,BL_TOGG, \
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
|
||||
_______,_______,_______, _______, _______,_______,_______,_______),
|
||||
enum layer_names {
|
||||
_BL,
|
||||
_FL
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: (Base Layer) Default Layer
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |
|
||||
* |-----------------------------------------------------------|
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_BL] = LAYOUT_60_ansi(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL
|
||||
),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = LAYOUT_60_ansi(
|
||||
KC_GRV, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_DEC, BL_INC, BL_TOGG,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______
|
||||
)
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,31 +1,24 @@
|
|||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Used for SHIFT_ESC
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
enum layer_names {
|
||||
_BL,
|
||||
_FL
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: (Base Layer) Default Layer
|
||||
*/
|
||||
[_BL] = KEYMAP_ANSI(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS, \
|
||||
MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \
|
||||
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, MO(_FL),KC_RCTL),
|
||||
[_BL] = LAYOUT_60_ansi(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL
|
||||
),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = KEYMAP_ANSI(
|
||||
KC_GRV, KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DEL, \
|
||||
_______,KC_MPRV,KC_MPLY,KC_MNXT,_______,_______,_______,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR, KC_SLCK, KC_PAUS,_______, \
|
||||
KC_CAPS,_______,KC_VOLD,KC_VOLU,KC_MUTE,_______,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,KC_DEL,_______, \
|
||||
_______,KC_APP,_______,_______,_______,_______,KC_END,_______,_______,_______,_______,_______, \
|
||||
_______,_______,_______, _______, _______,_______,_______,_______),
|
||||
[_FL] = LAYOUT_60_ansi(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
_______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, _______,
|
||||
KC_CAPS, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_DEL, _______,
|
||||
_______, KC_APP, _______, _______, _______, _______, KC_END, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______
|
||||
)
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,24 +0,0 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <hal.h>
|
||||
|
||||
#include "led.h"
|
||||
|
||||
|
||||
void led_set(uint8_t usb_led) {
|
||||
}
|
||||
|
|
@ -1,128 +0,0 @@
|
|||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <string.h>
|
||||
#include <hal.h>
|
||||
#include "timer.h"
|
||||
#include "wait.h"
|
||||
#include "print.h"
|
||||
#include "matrix.h"
|
||||
|
||||
|
||||
/*
|
||||
* JM60
|
||||
* Column pins are input with internal pull-down. Row pins are output and strobe with high.
|
||||
* Key is high or 1 when it turns on.
|
||||
*
|
||||
* col: { PTA15, PTC10, PTC11, PTC12, PTD2, PTB3, PTB4, PTB5, PTB6, PTB7, PTB8, PTB9, PTA2, PTA3 }
|
||||
* row: { PTB11, PTB10, PTB2, PTB1, PTB0}
|
||||
*/
|
||||
/* matrix state(1:on, 0:off) */
|
||||
static matrix_row_t matrix[MATRIX_ROWS];
|
||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
||||
static bool debouncing = false;
|
||||
static uint16_t debouncing_time = 0;
|
||||
|
||||
|
||||
void matrix_init(void)
|
||||
{
|
||||
//debug_matrix = true;
|
||||
/* Column(sense) */
|
||||
palSetPadMode(GPIOA, 15, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetPadMode(GPIOC, 10, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetPadMode(GPIOC, 11, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetPadMode(GPIOC, 12, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetPadMode(GPIOD, 2, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetPadMode(GPIOB, 3, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetPadMode(GPIOB, 4, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetPadMode(GPIOB, 5, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetPadMode(GPIOB, 6, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetPadMode(GPIOB, 7, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetPadMode(GPIOB, 8, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetPadMode(GPIOB, 9, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetPadMode(GPIOA, 2, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetPadMode(GPIOA, 3, PAL_MODE_INPUT_PULLDOWN);
|
||||
|
||||
/* Row(strobe) */
|
||||
palSetPadMode(GPIOB, 11, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
|
||||
memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
|
||||
memset(matrix_debouncing, 0, MATRIX_ROWS * sizeof(matrix_row_t));
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
for (int row = 0; row < MATRIX_ROWS; row++) {
|
||||
matrix_row_t data = 0;
|
||||
|
||||
// strobe row
|
||||
switch (row) {
|
||||
case 0: palSetPad(GPIOB, 11); break;
|
||||
case 1: palSetPad(GPIOB, 10); break;
|
||||
case 2: palSetPad(GPIOB, 2); break;
|
||||
case 3: palSetPad(GPIOB, 1); break;
|
||||
case 4: palSetPad(GPIOB, 0); break;
|
||||
}
|
||||
|
||||
wait_us(20); // need wait to settle pin state
|
||||
|
||||
// read col data: { PTA15, PTC10, PTC11, PTC12, PTD2, PTB3, PTB4, PTB5, PTB6, PTB7, PTB8, PTB9, PTA2, PTA3 }
|
||||
data = ((palReadPort(GPIOA) & 0x8000UL) >> 15) | // 0
|
||||
((palReadPort(GPIOC) & 0x1C00UL) >> 9) | // 1, 2, 3
|
||||
((palReadPort(GPIOD) & 0x0004UL) << 2) | // 4
|
||||
((palReadPort(GPIOB) & 0x03F8UL) << 2) | // 5, 6, 7, 8, 9, 10, 11
|
||||
((palReadPort(GPIOA) & 0x000CUL) << 10); // 12, 13
|
||||
|
||||
// un-strobe row
|
||||
switch (row) {
|
||||
case 0: palClearPad(GPIOB, 11); break;
|
||||
case 1: palClearPad(GPIOB, 10); break;
|
||||
case 2: palClearPad(GPIOB, 2); break;
|
||||
case 3: palClearPad(GPIOB, 1); break;
|
||||
case 4: palClearPad(GPIOB, 0); break;
|
||||
}
|
||||
|
||||
if (matrix_debouncing[row] != data) {
|
||||
matrix_debouncing[row] = data;
|
||||
debouncing = true;
|
||||
debouncing_time = timer_read();
|
||||
}
|
||||
}
|
||||
|
||||
if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
|
||||
for (int row = 0; row < MATRIX_ROWS; row++) {
|
||||
matrix[row] = matrix_debouncing[row];
|
||||
}
|
||||
debouncing = false;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
return (matrix[row] & (1<<col));
|
||||
}
|
||||
|
||||
matrix_row_t matrix_get_row(uint8_t row)
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
xprintf("\nr/c 01234567\n");
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
xprintf("%X0: ", row);
|
||||
matrix_row_t data = matrix_get_row(row);
|
||||
for (int col = 0; col < MATRIX_COLS; col++) {
|
||||
if (data & (1<<col))
|
||||
xprintf("1");
|
||||
else
|
||||
xprintf("0");
|
||||
}
|
||||
xprintf("\n");
|
||||
}
|
||||
}
|
||||
|
|
@ -1,27 +1,21 @@
|
|||
JM60
|
||||
========
|
||||
# JM60
|
||||
|
||||
A compact 60% keyboard with full RGB led support.
|
||||
|
||||
Keyboard Maintainer: QMK Community
|
||||
Hardware Supported: JM60
|
||||
Hardware Availability: https://kbdfans.myshopify.com/ (is no longer sold)
|
||||
* Keyboard Maintainer: QMK Community
|
||||
* Hardware Supported: JM60
|
||||
* Hardware Availability: https://kbdfans.myshopify.com/ (is no longer sold)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make jm60:default:bin
|
||||
make jm60:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
## Flashing Instructions
|
||||
|
||||
1) from the `qmk_firmware` directory run:
|
||||
```
|
||||
$ make jm60:default:bin
|
||||
```
|
||||
1) rename 'jm60_default.bin' to 'jm60_default.firmware'
|
||||
|
||||
2) rename 'jm60_default.bin' to 'jm60_default.firmware'
|
||||
2) Press 'R' and reconnect the keyboard.
|
||||
|
||||
3) Press 'R' and reconnect the keyboard.
|
||||
|
||||
4) Start the original Configuration Tool and flash 'jm60_default.bin'
|
||||
3) Start the original Configuration Tool and flash 'jm60_default.bin'
|
||||
|
|
|
|||
|
|
@ -5,22 +5,23 @@ MCU_LDSCRIPT = jm60_bootloader
|
|||
BOARD = JM60_BOARD
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
CUSTOM_MATRIX = yes # Custom matrix file
|
||||
BACKLIGHT_ENABLE = no
|
||||
VISUALIZER_ENABLE = no
|
||||
BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
|
||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||
|
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
LAYOUTS = 60_ansi
|
||||
|
|
|
|||
Loading…
Reference in a new issue