Remove FAUXCLICKY feature (deprecated) (#11829)

2021-02-09 09:49:05 -08:00 · 2021-02-09 09:49:05 -08:00 · 7161d65070
parent 738bd263c1
commit 7161d65070
483 changed files with 48 additions and 750 deletions
--- a/common_features.mk
+++ b/common_features.mk
@ -80,11 +80,6 @@ ifeq ($(strip $(VIRTSER_ENABLE)), yes)
    OPT_DEFS += -DVIRTSER_ENABLE
 endif
 ifeq ($(strip $(FAUXCLICKY_ENABLE)), yes)
    OPT_DEFS += -DFAUXCLICKY_ENABLE
    SRC += $(QUANTUM_DIR)/fauxclicky.c
 endif
 ifeq ($(strip $(MOUSEKEY_ENABLE)), yes)
    OPT_DEFS += -DMOUSEKEY_ENABLE
    OPT_DEFS += -DMOUSE_ENABLE
--- a/docs/feature_audio.md
+++ b/docs/feature_audio.md
@ -215,12 +215,6 @@ This is still a WIP, but check out `quantum/process_keycode/process_midi.c` to s
    AU_OFF,
    AU_TOG,
    #ifdef FAUXCLICKY_ENABLE
        FC_ON,
        FC_OFF,
        FC_TOG,
    #endif
    // Music mode on/off/toggle
    MU_ON,
    MU_OFF,
--- a/docs/getting_started_make_guide.md
+++ b/docs/getting_started_make_guide.md
@ -121,10 +121,6 @@ For further details, as well as limitations, see the [Unicode page](feature_unic
 This allows you output audio on the C6 pin (needs abstracting). See the [audio page](feature_audio.md) for more information.
 `FAUXCLICKY_ENABLE`
 Uses buzzer to emulate clicky switches. A cheap imitation of the Cherry blue switches. By default, uses the C6 pin, same as `AUDIO_ENABLE`.
 `VARIABLE_TRACE`
 Use this to debug changes to variable values, see the [tracing variables](unit_testing.md#tracing-variables) section of the Unit Testing page for more information.
--- a/docs/ja/feature_audio.md
+++ b/docs/ja/feature_audio.md
@ -220,12 +220,6 @@ const uint8_t music_map[MATRIX_ROWS][MATRIX_COLS] = LAYOUT_ortho_4x12(
    AU_OFF,
    AU_TOG,
    #ifdef FAUXCLICKY_ENABLE
        FC_ON,
        FC_OFF,
        FC_TOG,
    #endif
    // Music mode on/off/toggle
    MU_ON,
    MU_OFF,
--- a/docs/ja/getting_started_make_guide.md
+++ b/docs/ja/getting_started_make_guide.md
@ -110,10 +110,6 @@ make コマンド自体にもいくつかの追加オプションがあります
 C6 ピン(抽象化が必要)でオーディオ出力できます。詳細は[オーディオページ](ja/feature_audio.md)を見てください。
 `FAUXCLICKY_ENABLE`
 クリック音のあるスイッチをエミュレートするためにブザーを使います。Cherry社製の青軸スイッチの安っぽい模倣です。デフォルトでは、`AUDIO_ENABLE` と同じように C6 ピンを使います。
 `VARIABLE_TRACE`
 これを使って変数の値の変更をデバッグします。詳細についてはユニットテストのページの[変数のトレース](ja/unit_testing.md#tracing-variables)のセクションを見てください。
--- a/keyboards/1upkeyboards/1up60hse/rules.mk
+++ b/keyboards/1upkeyboards/1up60hse/rules.mk
@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 EXTRAFLAGS += -flto
 LAYOUTS = 60_ansi
--- a/keyboards/1upkeyboards/super16/rules.mk
+++ b/keyboards/1upkeyboards/super16/rules.mk
@ -31,6 +31,5 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = ortho_4x4 numpad_4x4
--- a/keyboards/40percentclub/25/rules.mk
+++ b/keyboards/40percentclub/25/rules.mk
@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes
--- a/keyboards/40percentclub/4pack/rules.mk
+++ b/keyboards/40percentclub/4pack/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/40percentclub/4x4/rules.mk
+++ b/keyboards/40percentclub/4x4/rules.mk
@ -28,7 +28,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = ortho_4x4  ortho_4x8  ortho_4x12  ortho_4x16
--- a/keyboards/40percentclub/5x5/rules.mk
+++ b/keyboards/40percentclub/5x5/rules.mk
@ -28,6 +28,5 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = ortho_5x5  ortho_5x10  ortho_5x15
--- a/keyboards/40percentclub/6lit/rules.mk
+++ b/keyboards/40percentclub/6lit/rules.mk
@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes
--- a/keyboards/40percentclub/foobar/rules.mk
+++ b/keyboards/40percentclub/foobar/rules.mk
@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes
--- a/keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk
+++ b/keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk
@ -10,7 +10,6 @@ MIDI_ENABLE = no             # MIDI support
 UNICODE_ENABLE = no          # Unicode
 BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
 TAP_DANCE_ENABLE = no
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend (it uses the same timer as BACKLIGHT_ENABLE)
--- a/keyboards/40percentclub/half_n_half/rules.mk
+++ b/keyboards/40percentclub/half_n_half/rules.mk
@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes
--- a/keyboards/40percentclub/i75/rules.mk
+++ b/keyboards/40percentclub/i75/rules.mk
@ -16,7 +16,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = ortho_5x15
 DEFAULT_FOLDER = 40percentclub/i75/promicro
--- a/keyboards/40percentclub/nein/rules.mk
+++ b/keyboards/40percentclub/nein/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/40percentclub/nori/rules.mk
+++ b/keyboards/40percentclub/nori/rules.mk
@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = ortho_4x4  ortho_4x8  ortho_4x12
--- a/keyboards/40percentclub/ut47/rules.mk
+++ b/keyboards/40percentclub/ut47/rules.mk
@ -28,7 +28,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 # custom matrix setup
 CUSTOM_MATRIX = yes
--- a/keyboards/4pplet/aekiso60/rev_a/rules.mk
+++ b/keyboards/4pplet/aekiso60/rev_a/rules.mk
@ -27,5 +27,4 @@ BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 UNICODE_ENABLE = no         # Unicode
--- a/keyboards/4pplet/steezy60/rev_a/rules.mk
+++ b/keyboards/4pplet/steezy60/rev_a/rules.mk
@ -27,5 +27,4 @@ BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 UNICODE_ENABLE = no         # Unicode
--- a/keyboards/4pplet/waffling60/rev_a/rules.mk
+++ b/keyboards/4pplet/waffling60/rev_a/rules.mk
@ -27,5 +27,4 @@ BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 UNICODE_ENABLE = no         # Unicode
--- a/keyboards/abacus/rules.mk
+++ b/keyboards/abacus/rules.mk
@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 ENCODER_ENABLE = yes
 DIP_SWITCH_ENABLE = yes
 LTO_ENABLE = yes
--- a/keyboards/absinthe/rules.mk
+++ b/keyboards/absinthe/rules.mk
@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 ENCODER_ENABLE = yes
 RGBLIGHT_ENABLE = yes
--- a/keyboards/abstract/ellipse/rev1/rules.mk
+++ b/keyboards/abstract/ellipse/rev1/rules.mk
@ -29,5 +29,4 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 ENCODER_ENABLE = yes		# Enable support for rotary encoders
--- a/keyboards/acheron/austin/rules.mk
+++ b/keyboards/acheron/austin/rules.mk
@ -18,7 +18,5 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
--- a/keyboards/acheron/elongate/rules.mk
+++ b/keyboards/acheron/elongate/rules.mk
@ -28,6 +28,4 @@ RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LTO_ENABLE = yes
--- a/keyboards/acheron/keebspcb/rules.mk
+++ b/keyboards/acheron/keebspcb/rules.mk
@ -18,8 +18,6 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
--- a/keyboards/acheron/shark/rules.mk
+++ b/keyboards/acheron/shark/rules.mk
@ -20,7 +20,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = ortho_4x12
--- a/keyboards/aeboards/aegis/rules.mk
+++ b/keyboards/aeboards/aegis/rules.mk
@ -28,5 +28,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/aeboards/ext65/rev1/rules.mk
+++ b/keyboards/aeboards/ext65/rev1/rules.mk
@ -28,4 +28,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/ai03/equinox/rev0/rules.mk
+++ b/keyboards/ai03/equinox/rev0/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/ai03/equinox/rev1/rules.mk
+++ b/keyboards/ai03/equinox/rev1/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/ai03/lunar/rules.mk
+++ b/keyboards/ai03/lunar/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/ai03/orbit/rules.mk
+++ b/keyboards/ai03/orbit/rules.mk
@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 USE_I2C = no                # I2C for split communication
 CUSTOM_MATRIX = yes			# For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c)
 # SPLIT_KEYBOARD = yes		# Split keyboard flag disabled as manual edits had to be done to the split common files
--- a/keyboards/ai03/orbit_x/rules.mk
+++ b/keyboards/ai03/orbit_x/rules.mk
@ -28,5 +28,4 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 SPLIT_KEYBOARD = yes        # Split keyboard
--- a/keyboards/ai03/polaris/rules.mk
+++ b/keyboards/ai03/polaris/rules.mk
@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_tsangan_hhkb
--- a/keyboards/ai03/quasar/rules.mk
+++ b/keyboards/ai03/quasar/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/akb/eb46/rules.mk
+++ b/keyboards/akb/eb46/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/akb/raine/rules.mk
+++ b/keyboards/akb/raine/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/al1/rules.mk
+++ b/keyboards/al1/rules.mk
@ -29,7 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 CUSTOM_MATRIX = yes
 SRC += matrix.c
--- a/keyboards/alf/dc60/rules.mk
+++ b/keyboards/alf/dc60/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/alf/x11/rules.mk
+++ b/keyboards/alf/x11/rules.mk
@ -29,5 +29,4 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 EXTRAFLAGS += -flto
--- a/keyboards/allison/rules.mk
+++ b/keyboards/allison/rules.mk
@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/allison_numpad/rules.mk
+++ b/keyboards/allison_numpad/rules.mk
@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = ortho_6x4 numpad_6x4
--- a/keyboards/amj96/rules.mk
+++ b/keyboards/amj96/rules.mk
@ -29,7 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 CUSTOM_MATRIX = yes
 SRC += matrix.c
--- a/keyboards/amjkeyboard/amj66/rules.mk
+++ b/keyboards/amjkeyboard/amj66/rules.mk
@ -28,7 +28,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = 66_ansi 66_iso
--- a/keyboards/angel17/alpha/rules.mk
+++ b/keyboards/angel17/alpha/rules.mk
@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = numpad_5x4
--- a/keyboards/angel17/rev1/rules.mk
+++ b/keyboards/angel17/rev1/rules.mk
@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = numpad_5x4
--- a/keyboards/angel17/rules.mk
+++ b/keyboards/angel17/rules.mk
@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = numpad_5x4
--- a/keyboards/angel64/rules.mk
+++ b/keyboards/angel64/rules.mk
@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 OLED_DRIVER_ENABLE = yes
 CUSTOM_MATRIX = yes
--- a/keyboards/aos/tkl/rules.mk
+++ b/keyboards/aos/tkl/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/aplyard/aplx6/rev1/rules.mk
+++ b/keyboards/aplyard/aplx6/rev1/rules.mk
@ -28,5 +28,4 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 UNICODE_ENABLE = yes        # Unicode
--- a/keyboards/arabica37/rev1/rules.mk
+++ b/keyboards/arabica37/rev1/rules.mk
@ -27,6 +27,5 @@ RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 SPLIT_KEYBOARD = yes
--- a/keyboards/arisu/rules.mk
+++ b/keyboards/arisu/rules.mk
@ -21,4 +21,3 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/ash1800/rules.mk
+++ b/keyboards/ash1800/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/ashpil/modelm_usbc/rules.mk
+++ b/keyboards/ashpil/modelm_usbc/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/atreus/rules.mk
+++ b/keyboards/atreus/rules.mk
@ -16,6 +16,5 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = yes        # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 DEFAULT_FOLDER = atreus/astar
--- a/keyboards/atxkb/1894/rules.mk
+++ b/keyboards/atxkb/1894/rules.mk
@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LTO_ENABLE = yes
 LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_tsangan_hhkb
--- a/keyboards/aves65/rules.mk
+++ b/keyboards/aves65/rules.mk
@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = 65_iso_blocker
--- a/keyboards/baguette/rules.mk
+++ b/keyboards/baguette/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/bakeneko80/rules.mk
+++ b/keyboards/bakeneko80/rules.mk
@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = tkl_ansi
--- a/keyboards/bat43/rules.mk
+++ b/keyboards/bat43/rules.mk
@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 DEFAULT_FOLDER = bat43/rev2
--- a/keyboards/bigseries/1key/rules.mk
+++ b/keyboards/bigseries/1key/rules.mk
@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/bigseries/2key/rules.mk
+++ b/keyboards/bigseries/2key/rules.mk
@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/bigseries/3key/rules.mk
+++ b/keyboards/bigseries/3key/rules.mk
@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/bigseries/4key/rules.mk
+++ b/keyboards/bigseries/4key/rules.mk
@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/blockey/rules.mk
+++ b/keyboards/blockey/rules.mk
@ -28,6 +28,5 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 RGBLIGHT_ENABLE = yes
--- a/keyboards/bm16a/rules.mk
+++ b/keyboards/bm16a/rules.mk
@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = ortho_4x4
--- a/keyboards/bm43a/rules.mk
+++ b/keyboards/bm43a/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/bm60rgb/rules.mk
+++ b/keyboards/bm60rgb/rules.mk
@ -29,7 +29,6 @@ MIDI_ENABLE = no             # MIDI support
 UNICODE_ENABLE = no          # Unicode
 BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = WS2812
 LTO_ENABLE = yes
--- a/keyboards/boardsource/4x12/rules.mk
+++ b/keyboards/boardsource/4x12/rules.mk
@ -28,7 +28,7 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
 LAYOUTS = ortho_4x12
 # Disable unsupported hardware
--- a/keyboards/boardsource/5x12/rules.mk
+++ b/keyboards/boardsource/5x12/rules.mk
@ -28,7 +28,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = ortho_5x12
--- a/keyboards/botanicalkeyboards/fm2u/rules.mk
+++ b/keyboards/botanicalkeyboards/fm2u/rules.mk
@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/bpiphany/frosty_flake/rules.mk
+++ b/keyboards/bpiphany/frosty_flake/rules.mk
@ -28,7 +28,6 @@ MIDI_ENABLE = no            # MIDI controls
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 CUSTOM_MATRIX = lite
 SRC += matrix.c
--- a/keyboards/bpiphany/sixshooter/rules.mk
+++ b/keyboards/bpiphany/sixshooter/rules.mk
@ -28,4 +28,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/bpiphany/tiger_lily/rules.mk
+++ b/keyboards/bpiphany/tiger_lily/rules.mk
@ -28,7 +28,6 @@ MIDI_ENABLE = no            # MIDI controls
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 CUSTOM_MATRIX = yes
 SRC += matrix.c
--- a/keyboards/bpiphany/unloved_bastard/rules.mk
+++ b/keyboards/bpiphany/unloved_bastard/rules.mk
@ -28,7 +28,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 CUSTOM_MATRIX = yes
 SRC += matrix.c
--- a/keyboards/bthlabs/geekpad/rules.mk
+++ b/keyboards/bthlabs/geekpad/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/business_card/alpha/rules.mk
+++ b/keyboards/business_card/alpha/rules.mk
@ -29,5 +29,4 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 OLED_DRIVER_ENABLE = yes
--- a/keyboards/business_card/beta/rules.mk
+++ b/keyboards/business_card/beta/rules.mk
@ -29,5 +29,4 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 OLED_DRIVER_ENABLE = yes
--- a/keyboards/business_card/rules.mk
+++ b/keyboards/business_card/rules.mk
@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 DEFAULT_FOLDER = business_card/beta
--- a/keyboards/cannonkeys/obliterated75/rules.mk
+++ b/keyboards/cannonkeys/obliterated75/rules.mk
@ -16,7 +16,6 @@ RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 WS2812_DRIVER = spi
 # Wildcard to allow APM32 MCU
--- a/keyboards/chidori/rules.mk
+++ b/keyboards/chidori/rules.mk
@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 CUSTOM_MATRIX = lite
--- a/keyboards/chimera_ortho_plus/rules.mk
+++ b/keyboards/chimera_ortho_plus/rules.mk
@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 UNICODE_ENABLE = yes
 CUSTOM_MATRIX = yes
--- a/keyboards/choc_taro/rules.mk
+++ b/keyboards/choc_taro/rules.mk
@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 CUSTOM_MATRIX = lite
 SRC += matrix.c
--- a/keyboards/ckeys/handwire_101/rules.mk
+++ b/keyboards/ckeys/handwire_101/rules.mk
@ -29,4 +29,3 @@ BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by d
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/ckeys/nakey/rules.mk
+++ b/keyboards/ckeys/nakey/rules.mk
@ -28,6 +28,5 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = numpad_5x4
--- a/keyboards/ckeys/obelus/rules.mk
+++ b/keyboards/ckeys/obelus/rules.mk
@ -28,6 +28,5 @@ MIDI_ENABLE = yes            # MIDI controls
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = yes           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 LAYOUTS = ortho_4x4
--- a/keyboards/ckeys/washington/rules.mk
+++ b/keyboards/ckeys/washington/rules.mk
@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 ENCODER_ENABLE = yes        # Enable support for encoders
 OLED_DRIVER_ENABLE = yes    # Enable support for OLED displays
--- a/keyboards/clawsome/bookerboard/rules.mk
+++ b/keyboards/clawsome/bookerboard/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no             # MIDI support
 UNICODE_ENABLE = no          # Unicode
 BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
--- a/keyboards/clawsome/coupe/rules.mk
+++ b/keyboards/clawsome/coupe/rules.mk
@ -22,6 +22,5 @@ MIDI_ENABLE = no             # MIDI support
 UNICODE_ENABLE = no          # Unicode
 BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
 LAYOUTS = 60_ansi
--- a/keyboards/clawsome/gamebuddy/rules.mk
+++ b/keyboards/clawsome/gamebuddy/rules.mk
@ -22,4 +22,3 @@ MIDI_ENABLE = no             # MIDI support
 UNICODE_ENABLE = no          # Unicode
 BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
--- a/keyboards/clawsome/sedan/rules.mk
+++ b/keyboards/clawsome/sedan/rules.mk
@ -22,6 +22,5 @@ MIDI_ENABLE = no             # MIDI support
 UNICODE_ENABLE = no          # Unicode
 BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
 LAYOUTS = 65_ansi
--- a/keyboards/clawsome/sidekick/rules.mk
+++ b/keyboards/clawsome/sidekick/rules.mk
@ -22,4 +22,3 @@ MIDI_ENABLE = no             # MIDI support
 UNICODE_ENABLE = no          # Unicode
 BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
--- a/keyboards/cocoa40/rules.mk
+++ b/keyboards/cocoa40/rules.mk
@ -29,5 +29,4 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 SPLIT_KEYBOARD = yes
--- a/keyboards/converter/modelm101/rules.mk
+++ b/keyboards/converter/modelm101/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/converter/numeric_keypad_IIe/rules.mk
+++ b/keyboards/converter/numeric_keypad_IIe/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/converter/usb_usb/ble/rules.mk
+++ b/keyboards/converter/usb_usb/ble/rules.mk
@ -16,7 +16,6 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 BLUETOOTH = AdafruitBLE
 ADAFRUIT_BLE_ENABLE = yes
--- a/keyboards/copenhagen_click/click_pad_v1/rules.mk
+++ b/keyboards/copenhagen_click/click_pad_v1/rules.mk
@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/Show more
+++ b/Show more