keyboards/ryanskidmore: add rskeys100 keyboard (#15506)
* keyboards/ryanskidmore/rskeys100: add rskeys100 draft firmware * keyboards/ryanskidmore/rskeys100: fix firmware * ryanskidmore/rskeys100: fix remaining bugs * keyboards/ryanskidmore/rskeys100: finishing touches on firmware * keyboards/ryanskidmore/rskeys100: migrate from full replacement matrix scanning to lite, move rgb matrix enable call to keymap * keyboards/ryanskidmore/rskeys100: remove undefines, clarify comments * ryanskidmore/rskeys100: remove unused imports * keyboards/ryanskidmore/rskeys100: pr feedback
This commit is contained in:
parent
8b668a24d6
commit
66fc18c756
85
keyboards/ryanskidmore/rskeys100/config.h
Normal file
85
keyboards/ryanskidmore/rskeys100/config.h
Normal file
|
@ -0,0 +1,85 @@
|
|||
// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x7273 // rs
|
||||
#define PRODUCT_ID 0x0064 // 100
|
||||
#define DEVICE_VER 0x0001 // rev 1
|
||||
#define MANUFACTURER ryanskidmore
|
||||
#define PRODUCT rsKeys100
|
||||
|
||||
/* Key Matrix Sizes */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 24
|
||||
|
||||
/* Rows */
|
||||
#define ROW_A D4
|
||||
#define ROW_B C6
|
||||
#define ROW_C D7
|
||||
#define ROW_D E6
|
||||
#define ROW_E B4
|
||||
#define ROW_F B5
|
||||
|
||||
/* Columns 0 - 20 (24 with dummy columns for shift registers) */
|
||||
#define SHR_LATCH B2
|
||||
#define SHR_CLOCK B3
|
||||
#define SHR_DATA B1
|
||||
#define SHR_COLS { 0x000001, 0x000002, 0x000004, 0x000008, 0x000010, 0x000020, 0x000040, 0x000080, 0x000100, 0x000200, 0x000400, 0x000800, 0x001000, 0x002000, 0x004000, 0x008000, 0x010000, 0x020000, 0x040000, 0x080000, 0x100000, 0x200000, 0x400000, 0x800000 }
|
||||
|
||||
/* The shift registers on the matrix PCB output a signal on each column, which passes through the
|
||||
* switch and a diode towards the row. The row is then connected to the AVR as an input. This means
|
||||
* the diode direction is COL(umn) to ROW */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* RGB Data Pin */
|
||||
#define RGB_DI_PIN C7
|
||||
/* The number of RGB LEDs connected */
|
||||
#define DRIVER_LED_TOTAL 105
|
||||
/* Set the maximum brightness to 110 to avoid going over 500 mA.
|
||||
* At full brightness with all three indicator LEDs on, the power draw is about 450 mA. */
|
||||
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 110
|
||||
/* Enable framebuffer effects */
|
||||
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
||||
/* Enable the cycle left right animation and set it as the startup mode */
|
||||
#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
|
||||
#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* Set the max power consumption for the keyboard, which is 500 mA. */
|
||||
#define USB_MAX_POWER_CONSUMPTION 500
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
#define FORCE_NKRO
|
||||
|
||||
/* disable these deprecated features by default */
|
||||
#define NO_ACTION_MACRO
|
||||
#define NO_ACTION_FUNCTION
|
121
keyboards/ryanskidmore/rskeys100/info.json
Normal file
121
keyboards/ryanskidmore/rskeys100/info.json
Normal file
|
@ -0,0 +1,121 @@
|
|||
{
|
||||
"keyboard_name": "rskeys100",
|
||||
"url": "",
|
||||
"maintainer": "ryanskidmore",
|
||||
"layouts": {
|
||||
"LAYOUT_fullsize_iso": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":2, "y":0},
|
||||
{"x":3, "y":0},
|
||||
{"x":4, "y":0},
|
||||
{"x":5, "y":0},
|
||||
{"x":6.5, "y":0},
|
||||
{"x":7.5, "y":0},
|
||||
{"x":8.5, "y":0},
|
||||
{"x":9.5, "y":0},
|
||||
{"x":11, "y":0},
|
||||
{"x":12, "y":0},
|
||||
{"x":13, "y":0},
|
||||
{"x":14, "y":0},
|
||||
{"x":15.25, "y":0},
|
||||
{"x":16.25, "y":0},
|
||||
{"x":17.25, "y":0},
|
||||
|
||||
{"x":0, "y":1.25},
|
||||
{"x":1, "y":1.25},
|
||||
{"x":2, "y":1.25},
|
||||
{"x":3, "y":1.25},
|
||||
{"x":4, "y":1.25},
|
||||
{"x":5, "y":1.25},
|
||||
{"x":6, "y":1.25},
|
||||
{"x":7, "y":1.25},
|
||||
{"x":8, "y":1.25},
|
||||
{"x":9, "y":1.25},
|
||||
{"x":10, "y":1.25},
|
||||
{"x":11, "y":1.25},
|
||||
{"x":12, "y":1.25},
|
||||
{"x":13, "y":1.25, "w":2},
|
||||
{"x":15.25, "y":1.25},
|
||||
{"x":16.25, "y":1.25},
|
||||
{"x":17.25, "y":1.25},
|
||||
{"x":18.5, "y":1.25},
|
||||
{"x":19.5, "y":1.25},
|
||||
{"x":20.5, "y":1.25},
|
||||
{"x":21.5, "y":1.25},
|
||||
|
||||
{"x":0, "y":2.25, "w":1.5},
|
||||
{"x":1.5, "y":2.25},
|
||||
{"x":2.5, "y":2.25},
|
||||
{"x":3.5, "y":2.25},
|
||||
{"x":4.5, "y":2.25},
|
||||
{"x":5.5, "y":2.25},
|
||||
{"x":6.5, "y":2.25},
|
||||
{"x":7.5, "y":2.25},
|
||||
{"x":8.5, "y":2.25},
|
||||
{"x":9.5, "y":2.25},
|
||||
{"x":10.5, "y":2.25},
|
||||
{"x":11.5, "y":2.25},
|
||||
{"x":12.5, "y":2.25},
|
||||
{"x":15.25, "y":2.25},
|
||||
{"x":16.25, "y":2.25},
|
||||
{"x":17.25, "y":2.25},
|
||||
{"x":18.5, "y":2.25},
|
||||
{"x":19.5, "y":2.25},
|
||||
{"x":20.5, "y":2.25},
|
||||
{"x":21.5, "y":2.25, "h": 2},
|
||||
|
||||
{"x":0, "y":3.25, "w":1.75},
|
||||
{"x":1.75, "y":3.25},
|
||||
{"x":2.75, "y":3.25},
|
||||
{"x":3.75, "y":3.25},
|
||||
{"x":4.75, "y":3.25},
|
||||
{"x":5.75, "y":3.25},
|
||||
{"x":6.75, "y":3.25},
|
||||
{"x":7.75, "y":3.25},
|
||||
{"x":8.75, "y":3.25},
|
||||
{"x":9.75, "y":3.25},
|
||||
{"x":10.75, "y":3.25},
|
||||
{"x":11.75, "y":3.25},
|
||||
{"x":12.75, "y":3.25},
|
||||
{"x":13.75, "y":2.25, "w":1.25, "h":2},
|
||||
{"x":18.5, "y":3.25},
|
||||
{"x":19.5, "y":3.25},
|
||||
{"x":20.5, "y":3.25},
|
||||
|
||||
{"x":0, "y":4.25, "w":1.25},
|
||||
{"x":1.25, "y":4.25},
|
||||
{"x":2.25, "y":4.25},
|
||||
{"x":3.25, "y":4.25},
|
||||
{"x":4.25, "y":4.25},
|
||||
{"x":5.25, "y":4.25},
|
||||
{"x":6.25, "y":4.25},
|
||||
{"x":7.25, "y":4.25},
|
||||
{"x":8.25, "y":4.25},
|
||||
{"x":9.25, "y":4.25},
|
||||
{"x":10.25, "y":4.25},
|
||||
{"x":11.25, "y":4.25},
|
||||
{"x":12.25, "y":4.25, "w":2.75},
|
||||
{"x":16.25, "y":4.25},
|
||||
{"x":18.5, "y":4.25},
|
||||
{"x":19.5, "y":4.25},
|
||||
{"x":20.5, "y":4.25},
|
||||
{"x":21.5, "y":4.25, "h":2},
|
||||
|
||||
{"x":0, "y":5.25, "w":1.25},
|
||||
{"x":1.25, "y":5.25, "w":1.25},
|
||||
{"x":2.5, "y":5.25, "w":1.25},
|
||||
{"x":3.75, "y":5.25, "w":6.25},
|
||||
{"x":10, "y":5.25, "w":1.25},
|
||||
{"x":11.25, "y":5.25, "w":1.25},
|
||||
{"x":12.5, "y":5.25, "w":1.25},
|
||||
{"x":13.75, "y":5.25, "w":1.25},
|
||||
{"x":15.25, "y":5.25},
|
||||
{"x":16.25, "y":5.25},
|
||||
{"x":17.25, "y":5.25},
|
||||
{"x":18.5, "y":5.25, "w":2},
|
||||
{"x":20.5, "y":5.25}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
65
keyboards/ryanskidmore/rskeys100/keymaps/default/keymap.c
Normal file
65
keyboards/ryanskidmore/rskeys100/keymaps/default/keymap.c
Normal file
|
@ -0,0 +1,65 @@
|
|||
// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/*
|
||||
* ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐
|
||||
* │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Scr│Pse│
|
||||
* └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐
|
||||
* │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │Ins│Hom│PgU│ │Num│ / │ * │ - │
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤
|
||||
* │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ │ │Del│End│PgD│ │ 7 │ 8 │ 9 │ │
|
||||
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ Ent│ └───┴───┴───┘ ├───┼───┼───┤ + │
|
||||
* │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │ │ │ 4 │ 5 │ 6 │ │
|
||||
* ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐ ├───┼───┼───┼───┤
|
||||
* │Shft│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ │ 1 │ 2 │ 3 │ │
|
||||
* ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│
|
||||
* │Ctrl│GUI │Alt │ │ Alt│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ │ 0 │ . │ │
|
||||
* └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘
|
||||
*/
|
||||
/* Default Layer */
|
||||
[0] = LAYOUT_fullsize_iso(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, LT(1, KC_F12), KC_PSCR, KC_SLCK, KC_PAUS,
|
||||
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_P4, KC_P5, KC_P6,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT
|
||||
),
|
||||
/* RGB Control Layer */
|
||||
[1] = LAYOUT_fullsize_iso(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, _______, _______, _______
|
||||
),
|
||||
};
|
||||
|
||||
void keyboard_post_init_user(void) {
|
||||
rgb_matrix_enable_noeeprom();
|
||||
}
|
||||
|
||||
void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
|
||||
/* We use RGB for the indicator RGB colours since we don't need to adjust the brightness.
|
||||
* If any of the indicators are enabled, set the key to white. This overrides the active RGB
|
||||
* matrix animation. */
|
||||
|
||||
if (host_keyboard_led_state().caps_lock) {
|
||||
RGB_MATRIX_INDICATOR_SET_COLOR(73, 255, 255, 255);
|
||||
}
|
||||
|
||||
if (host_keyboard_led_state().num_lock) {
|
||||
RGB_MATRIX_INDICATOR_SET_COLOR(19, 255, 255, 255);
|
||||
}
|
||||
|
||||
if (host_keyboard_led_state().scroll_lock) {
|
||||
RGB_MATRIX_INDICATOR_SET_COLOR(14, 255, 255, 255);
|
||||
}
|
||||
}
|
|
@ -0,0 +1 @@
|
|||
This is the default keymap (UK, ISO) for the rskeys100. The RGB control layer can be activated by holding the F12 key.
|
110
keyboards/ryanskidmore/rskeys100/matrix.c
Normal file
110
keyboards/ryanskidmore/rskeys100/matrix.c
Normal file
|
@ -0,0 +1,110 @@
|
|||
/*
|
||||
Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
|
||||
Modified by Ryan Skidmore <rskeys@ryanskidmore.co.uk> (@ryanskidmore)
|
||||
to support the rskeys100.
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <stdbool.h>
|
||||
#include "matrix.h"
|
||||
#include <util/delay.h>
|
||||
#include "quantum.h"
|
||||
|
||||
static const uint32_t col_values[24] = SHR_COLS;
|
||||
|
||||
static uint8_t read_rows(void);
|
||||
static void select_col(uint8_t col);
|
||||
|
||||
static void shift_pulse(void);
|
||||
static void shift_out_single(uint8_t value);
|
||||
static void shift_out(uint32_t value);
|
||||
|
||||
void matrix_init_custom(void) {
|
||||
setPinInput(ROW_A);
|
||||
setPinInput(ROW_B);
|
||||
setPinInput(ROW_C);
|
||||
setPinInput(ROW_D);
|
||||
setPinInput(ROW_E);
|
||||
setPinInput(ROW_F);
|
||||
|
||||
setPinOutput(SHR_DATA);
|
||||
setPinOutput(SHR_LATCH);
|
||||
setPinOutput(SHR_CLOCK);
|
||||
}
|
||||
|
||||
bool matrix_scan_custom(matrix_row_t current_matrix[]) {
|
||||
bool changed = false;
|
||||
|
||||
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
|
||||
select_col(col);
|
||||
_delay_us(1);
|
||||
uint8_t rows = read_rows();
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
bool prev_bit = ((uint32_t)(current_matrix[row]) & (matrix_row_t)(1UL << col)) ? 1 : 0;
|
||||
bool curr_bit = ((uint32_t)rows & (uint32_t)(1UL << row)) ? 1 : 0;
|
||||
if (prev_bit != curr_bit) {
|
||||
current_matrix[row] = (uint32_t)(current_matrix[row]) ^ (uint32_t)(1UL << col);
|
||||
changed = true;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
return changed;
|
||||
}
|
||||
|
||||
static uint8_t read_rows(void) {
|
||||
return (readPin(ROW_F) << 5)
|
||||
| (readPin(ROW_E) << 4)
|
||||
| (readPin(ROW_D) << 3)
|
||||
| (readPin(ROW_C) << 2)
|
||||
| (readPin(ROW_B) << 1)
|
||||
| (readPin(ROW_A) );
|
||||
}
|
||||
|
||||
static void select_col(uint8_t col) {
|
||||
shift_out(col_values[col]);
|
||||
}
|
||||
|
||||
static void shift_out(uint32_t value) {
|
||||
writePinLow(SHR_LATCH);
|
||||
uint8_t first_byte = (value >> 16) & 0xFF;
|
||||
uint8_t second_byte = (value >> 8) & 0xFF;
|
||||
uint8_t third_byte = (uint8_t)(value & 0xFF);
|
||||
|
||||
shift_out_single(first_byte);
|
||||
shift_out_single(second_byte);
|
||||
shift_out_single(third_byte);
|
||||
writePinHigh(SHR_LATCH);
|
||||
/* We delay here to prevent multiple consecutive keys being triggered with a single switch press */
|
||||
_delay_us(10);
|
||||
}
|
||||
|
||||
static void shift_out_single(uint8_t value) {
|
||||
for (uint8_t i = 0; i < 8; i++) {
|
||||
if (value & 0b10000000) {
|
||||
writePinHigh(SHR_DATA);
|
||||
} else {
|
||||
writePinLow(SHR_DATA);
|
||||
}
|
||||
|
||||
shift_pulse();
|
||||
value = value << 1;
|
||||
}
|
||||
}
|
||||
|
||||
static inline void shift_pulse(void) {
|
||||
writePinHigh(SHR_CLOCK);
|
||||
writePinLow(SHR_CLOCK);
|
||||
}
|
22
keyboards/ryanskidmore/rskeys100/readme.md
Normal file
22
keyboards/ryanskidmore/rskeys100/readme.md
Normal file
|
@ -0,0 +1,22 @@
|
|||
# rskeys100
|
||||
|
||||
The rskeys100 is a full size, 100% ISO keyboard with per-key RGB.
|
||||
|
||||
* Keyboard Maintainer: [Ryan Skidmore](https://github.com/ryanskidmore)
|
||||
* Hardware Supported: The rskeys100 matrix PCB is the only supported PCB for the switch matrix. This PCB works with any
|
||||
Pro Micro or Pro Micro alternative as the daughterboard.
|
||||
* Hardware Availability: Coming soon
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make ryanskidmore/rskeys100:default
|
||||
|
||||
Flashing example for this keyboard:
|
||||
|
||||
make ryanskidmore/rskeys100:default:flash
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
## Bootloader
|
||||
|
||||
To enter the bootloader, press the `RESET` button on your daughterboard PCB while it's plugged in.
|
30
keyboards/ryanskidmore/rskeys100/rskeys100.c
Normal file
30
keyboards/ryanskidmore/rskeys100/rskeys100.c
Normal file
|
@ -0,0 +1,30 @@
|
|||
// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "rskeys100.h"
|
||||
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
led_config_t g_led_config = { {
|
||||
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,NO_LED, 14, 15, 16,NO_LED,NO_LED,NO_LED,NO_LED},
|
||||
{ 37, 36, 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 24, 24, 23, 22, 21, 20, 19, 18, 17},
|
||||
{ 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60},
|
||||
{ 78, 77, 76, 75, 74, 73, 72, 71, 70, 69, 68, 67, 66,NO_LED,NO_LED,NO_LED,NO_LED, 64, 63, 62,NO_LED},
|
||||
{ 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91,NO_LED,NO_LED, 93,NO_LED, 94, 95, 96, 97},
|
||||
{ 117,NO_LED, 116, 115,NO_LED,NO_LED, 112,NO_LED,NO_LED,NO_LED, 109, 108, 107, 106, 105, 103, 102, 101,NO_LED, 99,NO_LED}
|
||||
}, {
|
||||
{0, 0}, {21, 0}, {32, 0}, {43, 0}, {53, 0}, {64, 0}, {75, 0}, {85, 0}, {96, 0}, {117, 0}, {128, 0}, {139, 0}, {149, 0}, {160, 0}, {171, 0}, {181, 0},
|
||||
{0, 13}, {11, 13}, {21, 13}, {32, 13}, {42, 13}, {53, 13}, {64, 13}, {75, 13}, {85, 13}, {96, 13}, {107, 13}, {117, 13}, {128, 13}, {139, 13}, {160, 13}, {171, 13}, {181, 13}, {192, 13}, {203, 13}, {213, 13}, {224, 13},
|
||||
{0, 26}, {11, 26}, {21, 26}, {32, 26}, {42, 26}, {53, 26}, {64, 26}, {75, 26}, {85, 26}, {96, 26}, {107, 26}, {117, 26}, {128, 26}, {149, 26}, {160, 26}, {171, 26}, {181, 26}, {192, 26}, {203, 26}, {213, 26}, {224, 26},
|
||||
{0, 38}, {11, 38}, {21, 38}, {32, 38}, {42, 38}, {53, 38}, {64, 38}, {75, 38}, {85, 38}, {96, 38}, {117, 38}, {128, 38}, {149, 38}, {192, 38}, {203, 38}, {213, 38},
|
||||
{0, 51}, {11, 51}, {21, 51}, {32, 51}, {42, 51}, {53, 51}, {64, 51}, {75, 51}, {85, 51}, {96, 51}, {107, 51}, {117, 51}, {139, 51}, {171, 51}, {192, 51}, {203, 51}, {213, 51}, {224, 51},
|
||||
{0, 64}, {11, 64}, {21, 64}, {64, 64}, {107, 64}, {117, 64}, {128, 64}, {149, 64}, {160, 64}, {171, 64}, {181, 64}, {192, 64}, {213, 64}
|
||||
}, {
|
||||
4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
|
||||
4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
|
||||
4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
|
||||
4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
|
||||
4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
|
||||
4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4
|
||||
} };
|
||||
#endif
|
22
keyboards/ryanskidmore/rskeys100/rskeys100.h
Normal file
22
keyboards/ryanskidmore/rskeys100/rskeys100.h
Normal file
|
@ -0,0 +1,22 @@
|
|||
// Copyright 2021 Ryan Skidmore (@ryanskidmore, rskeys@ryanskidmore.co.uk)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_fullsize_iso( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
|
||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, K120, \
|
||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, K220, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K317, K318, K319, \
|
||||
K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K415, K417, K418, K419, K420, \
|
||||
K500, K502, K503, K506, K510, K511, K512, K513, K514, K515, K516, K517, K519 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO, K014, K015, K016, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, K120, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, K220, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, KC_NO, KC_NO, KC_NO, KC_NO, K317, K318, K319, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, KC_NO, K415, KC_NO, K417, K418, K419, K420, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K500, KC_NO, K502, K503, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, K514, K515, K516, K517, KC_NO, K519, KC_NO, KC_NO, KC_NO, KC_NO } \
|
||||
}
|
23
keyboards/ryanskidmore/rskeys100/rules.mk
Normal file
23
keyboards/ryanskidmore/rskeys100/rules.mk
Normal file
|
@ -0,0 +1,23 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = no # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Enable N-Key Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
RGB_MATRIX_ENABLE = yes
|
||||
RGB_MATRIX_DRIVER = WS2812
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
CUSTOM_MATRIX = lite
|
||||
|
||||
SRC += matrix.c
|
Loading…
Reference in a new issue