Update Phantom config to better match template

This commit is contained in:
Mathias Andersson 2017-06-17 19:41:55 +02:00
parent 67b8bf8f70
commit 3522496f24
2 changed files with 122 additions and 22 deletions

View file

@ -44,6 +44,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW or ROW2COL */ /* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL #define DIODE_DIRECTION ROW2COL
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Underlight configuration
*/
#define RGB_DI_PIN E2
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 20 // Number of LEDs
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
/* define if matrix has ghost */ /* define if matrix has ghost */
//#define MATRIX_HAS_GHOST //#define MATRIX_HAS_GHOST
@ -55,19 +68,79 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Locking resynchronize hack */ /* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE #define LOCKING_RESYNC_ENABLE
/* key combination for command */ /*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \ #define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
) )
/* Underlight configuration /* control how magic key switches layers */
*/ //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
#define RGB_DI_PIN E2 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
#define RGBLIGHT_ANIMATIONS //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
#define RGBLED_NUM 20 // Number of LEDs
#define RGBLIGHT_HUE_STEP 10 /* override magic key keymap */
#define RGBLIGHT_SAT_STEP 17 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
#define RGBLIGHT_VAL_STEP 17 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/* /*
* Feature disable options * Feature disable options
@ -87,4 +160,27 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_MACRO //#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION //#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
#endif #endif

View file

@ -49,17 +49,21 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# comment out to disable the options. # change yes to no to disable
# #
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400) CONSOLE_ENABLE ?= no # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration COMMAND_ENABLE ?= yes # Commands for debug and configuration
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
RGBLIGHT_ENABLE ?=yes # Enable keyboard underlight functionality (+4870) SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150) # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
MIDI_ENABLE ?= no # MIDI controls NKRO_ENABLE ?= yes # USB Nkey Rollover
AUDIO_ENABLE ?= no BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
UNICODE_ENABLE ?= no # Unicode RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE ?= no # Audio output on port C6
FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches